Optimization Driven Architectural Design of Structures

Deliverables

(7.2) 6 Conference Presentations

6 presentations in international conferences for Tasks 7.1 to 7.10

(7.1) 4 Journal Publications

4 journal publications for Tasks 7.1 to 7.10

(6.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 6.1, 6.2 and 6.3

(2.3) 2 Conference Presentations

2 presentations in international conferences Tasks 2.2, 2.3 and 2.4

(1.1) 3 Conference Presentations

Three conference papers for tasks 1.1, 1.2 & 1.3.

(4.1) 3 Journal Publications

3 journal publications for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(6.1) 2 Journal Publications

2 journal publication for Tasks 6.1, 6.2 and 6.3

(5.1) 2 Journal Publications, 2 Publications

2 journal publication and 2 publication in architecture-related magazine for Tasks 5.1, 5.2 and 5.3

(5.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 5.1, 5.2 and 5.3

(2.2) 3 Journal Publications, 2 Publications

3 journal publication and 2 publication in architecture-related magazines for Tasks 2.2, 2.3 and 2.5

(4.2) 5 Conference Presentations

5 presentations in international conferences for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(3.1) 2 Journal Publications

2 journal publications for Tasks 3.1, 3.2 and 3.3

(8.1) Participation in OPT-ii 2016 and OPT-iii 2018

Participation of early stage and experienced researchers of the participant countries of the Network in OPT-ii 2016 and in OPT-iii 2018 for Task 8.1

(8.2) 3-4 Diploma Thesis annually

Three to four Diploma Theses are expected to be carried out per year of the project for Task 8.2

(8.3) Participation in the International Seminars on Optimization Driven Architecture

Participation of early stage researchers of the participant countries of the Network in the International Seminars on Optimization Driven Architecture for Task 8.3

Publications

DzAIℕ: Deep learning based generative design

Author(s): Nikos Ath. Kallioras, Nikos D. Lagaros
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 591-598, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.251

Automated Optimal Motion Sequence of a 9-Bar Linkage

Author(s): Maria Matheou, Nikos Ath, Kallioras, Nikos D. Lagaros and Marios C. Phocas
Published in: Frontiers in Built Environment, 2020, ISSN 2297-3362
Publisher: Frontires Media S.A.
DOI: 10.3389/fbuil.2020.00132

Bioclimatic building design theory and application

Author(s): Agnes Couvelas
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 326-333, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.238

Transformable building envelope design in architectural education

Author(s): Maria Matheou, Agnes Couvelas, Marios C. Phocas
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 116-123, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.212

Optimal Design of Elastic Circular Plane Arches

Author(s): Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Published in: Frontiers in Built Environment, Issue 6, 2020, ISSN 2297-3362
Publisher: Frontiers Media S.A.
DOI: 10.3389/fbuil.2020.00074

Multi-axis 3D printing of material reduced shell structures on a reconfigurable supporting system using topology optimization principles

Author(s): Odysseas Kontovourkis, Marios C. Phocas, George Tryfonos, Christos Georgiou
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 379-386, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.280

A preliminary study on a variable section beam through Algorithm-Aided Design: a way to connect architectural shape and structural optimization

Author(s): Laura Sardone, Rita Greco, Alessandra Fiore, Carlo Moccia, Domenico De Tommasi, Nikos D. Lagaros
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 497-504, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.264

Structural optimization of elastic circular arches and design criteria

Author(s): Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 425-432, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.274

A Case Study on the Selection of Optimum Loop Units for the Deployable Arch Structures Exposed to Lateral and Non-uniform Gravity Loads

Author(s): K. Yücetürk, E. Aktaş, F. Maden, Ş. Gur, C.C. Mitropoulou
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 481-488, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.267

Volume/thrust optimal shape criteria for arches under static vertical loads

Author(s): Giuseppe Carlo Marano; Francesco Trentaduea; Rita Greco; Ivo Vanzi; Bruno Briseghella
Published in: Journal of Traffic and Transportation Engineering (English Edition), Issue 17, 2018, ISSN 2095-7564
Publisher: Elsevier
DOI: 10.1016/j.jtte.2018.10.005

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing

Author(s): Georgios Kazakis, Ioannis Kanellopoulos, Stefanos Sotiropoulos, Nikos D. Lagaros
Published in: Heliyon, Issue 3/10, 2017, Page(s) e00431, ISSN 2405-8440
Publisher: Elsevier
DOI: 10.1016/j.heliyon.2017.e00431

Construction of currency portfolios by means of an optimized investment strategy

Author(s): Spyros K. Chandrinos, Nikos D. Lagaros
Published in: Operations Research Perspectives, Issue 5, 2018, Page(s) 32-44, ISSN 2214-7160
Publisher: Elsevier BV
DOI: 10.1016/j.orp.2018.01.001

Smoothed reduction of fracture mechanics solutions to 1D cracked models

Author(s): Stavros Chatzieleftheriou, Nikos D. Lagaros
Published in: European Journal of Mechanics - A/Solids, Issue 69, 2018, Page(s) 12-22, ISSN 0997-7538
Publisher: Elsevier BV
DOI: 10.1016/j.euromechsol.2017.11.009

Geometric constraints for shape and topology optimization in architectural design

Author(s): Charles Dapogny, Alexis Faure, George Michailidis, Gregoire Allaire, Agnes Couvelas, Rafael Estevez
Published in: Computational mechanics, 2017, ISSN 0178-7675
Publisher: Springer Verlag
DOI: 10.1007/s00466-017-1383-6

"A C# code for solving 3D topology optimization problems using SAP2000"

Author(s): Nikos D. Lagaros; Nikos Vasileiou; Georgios Kazakis
Published in: Optimization in Engineering, Issue 8, 2018, ISSN 1573-2924
Publisher: Springer
DOI: 10.5281/zenodo.2580082

Damage Index-Based Lower Bound Structural Design

Author(s): Chara Ch. Mitropoulou, Giuseppe C. Marano, Nikos D. Lagaros
Published in: Frontiers in Built Environment, Issue 4, 2018, ISSN 2297-3362
Publisher: Frontiers
DOI: 10.3389/fbuil.2018.00032

The Development of the Athens Water Supply System and Inferences for Optimizing the Scale of Water Infrastructures

Author(s): G.-Fivos Sargentis, Romanos Ioannidis, Georgios Karakatsanis, Stavroula Sigourou, Nikos D. Lagaros, Demetris Koutsoyiannis
Published in: Sustainability, Issue 11/9, 2019, Page(s) 2657, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su11092657

The Environmental and Economic Impact of Structural Optimization

Author(s): Nikos D. Lagaros
Published in: Structural and Multidisciplinary Optimization, Issue 1, 2018, ISSN 1615-147X
Publisher: Springer Verlag
DOI: 10.5281/zenodo.2580100

Environmental Assessment of Cost Optimized Structural Systems in Tall Buildings

Author(s): Dimitris Mavrokapnidis; Chara Ch. Mitropoulou; Nikos D. Lagaros
Published in: Journal of Building Engineering, Issue 6, 2019, ISSN 2352-7102
Publisher: Springer
DOI: 10.5281/zenodo.2620160

The Impact of Asphalt Wearing Surface Thickness on Response of Two-Span Continuous Cast-in-Place Prestressed Concrete Box Girder Highway Bridge

Author(s): Khairedin M. Abdalla, Rajai Z. Al-Rousan, Mohammed T. Obaidat, Osama K. Nusier, Khaldoon Bani-Hani, Nikos D. Lagaros
Published in: Journal of Engineering Science and Technology Review, Issue 12/1, 2019, Page(s) 173-177, ISSN 1791-9320
Publisher: Kavala Institute of Technology
DOI: 10.25103/jestr.121.20

Nested Topology Optimization Methodology for Designing Two-Wheel Chassis

Author(s): Stefanos E. Manios, Nikos D. Lagaros, Elias Nassiopoulos
Published in: Frontiers in Built Environment, Issue 5, 2019, ISSN 2297-3362
Publisher: Frontiers
DOI: 10.3389/fbuil.2019.00034

A novel planar scissor structure transforming between concave and convex configurations

Author(s): M. Yar, K. Korkmaz, G. Kiper, F. Maden, Y. Akgün, E. Aktaş
Published in: International Journal of Computational Methods and Experimental Measurements, Issue 5/4, 2017, Page(s) 442-450, ISSN 2046-0546
Publisher: WIT Press
DOI: 10.2495/cmem-v5-n4-442-450

Digital to physical development of a reconfigurable modular formwork for concrete casting and assembling of a shell structure

Author(s): Odysseas Kontovourkis, Marios C. Phocas, Constantinos Katsambas
Published in: Automation in Construction, Issue 106, 2019, Page(s) 102855, ISSN 0926-5805
Publisher: Elsevier BV
DOI: 10.1016/j.autcon.2019.102855

Structural optimization under overhang constraints imposed by additive manufacturing technologies

Author(s): G. Allaire, C. Dapogny, R. Estevez, A. Faure, G. Michailidis
Published in: Journal of Computational Physics, Issue 351, 2017, Page(s) 295-328, ISSN 0021-9991
Publisher: Academic Press
DOI: 10.1016/j.jcp.2017.09.041

Stochastic Evaluation of Landscapes Transformed by Renewable Energy Installations and Civil Works

Author(s): G.-Fivos Sargentis, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Demetris Koutsoyiannis
Published in: Energies, Issue 12/14, 2019, Page(s) 2817, ISSN 1996-1073
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12142817

Fujian Tulou Rammed Earth Structures: Optimizing Restoration Techniques Through Participatory Design and Collective Practices

Author(s): Evangelia Frangedaki, Xihong Gao, Nikos D. Lagaros, Bruno Briseghella, Giuseppe Carlo Marano, G. Fivos Sargentis, Nikiforos Meimaroglou
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 92-99, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.209

Parametric Design: formal and structural connection for a pedestrian bridge in the archeological area of Roca Vecchia (IT)

Author(s): G. Cesario, L. Sardone, R. Greco, Cascella, Spinelli, G.C. Marano
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 473-480, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.268

Weight and Material Optimization of Scissor-hinge Linkages According to Given Span Length

Author(s): Yenal Akgün, Feray Maden, Erinç Yıldırım
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 387-393, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.279

Resonance Investigation and its Effects on Weight Optimization of Tubular Steel Wind Turbine Towers

Author(s): Konstantina G. Koulatsou, George Kazakis, Charis J. Gantes, Nikos D. Lagaros
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 4-11, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.198

Motion Sequence Optimization of a Planar Structure

Author(s): Maria Matheou, Nikos A. Kallioras, Nikos D. Lagaros, Marios C. Phocas
Published in: Procedia Manufacturing, Issue 44, 2020, Page(s) 310-317, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.02.236

Radially expandable ring-like structure with antiparallelogram loops

Author(s): Gür, Ş., Korkmaz. K., Kiper, G.
Published in: International Symposium of Mechanism and Machine Science, 2017 AzC IFToMM – Azerbaijan Technical University 11-14 September 2017, Baku, Azerbaijan, 2017, Page(s) 150-155
Publisher: Azerbaijan Technical University
DOI: 10.5281/zenodo.3592391

Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale

Author(s): Kontovourkis O
Published in: Proceedings of the 35th Conference on Education in Computer Aided Architectural Design in Europe: ShoCK! - Sharing Computational Knowledge! (Volume 2)., 2017, Page(s) 125-134
Publisher: Sapienza University of Rome
DOI: 10.5281/zenodo.3574318

Development of a web platform of knowledge exchange for optimal selection of building materials based on ecological criteria

Author(s): George-Fivos Sargentis, Evangelia Frangedaki, Panayiotis Dimitriadis, and Demetris Koutsoyiannis
Published in: European Geosciences Union General Assembly 2019, Issue EGU2019-10395, 2019
Publisher: European Geosciences Union General Assembly 2019

Stochastic similarities between natural processes and art: Application in the analysis and optimization of landscape aesthetics of renewable energy and civil works

Author(s): Romanos Ioannidis, Panayiotis Dimitriadis, G.-Fivos Sargentis, Evangelia Frangedaki, Theano Iliopoulou, and Demetris Koutsoyiannis
Published in: European Geosciences Union General Assembly 2019, Issue EGU2019-11403, 2019
Publisher: European Geosciences Union General Assembly 2019

"Optimizing engineering aspects of earth constructions. The earth as ""common"" material."

Author(s): Evangelia Frangedaki and G.-Fivos Sargentis
Published in: European Geosciences Union General Assembly 2019, Issue EGU2019-11412, 2019
Publisher: European Geosciences Union General Assembly 2019

Optimizing the size of Hilarion dam with technical, economical and environmental parameters.

Author(s): Maria Sako, Eleni Tsoli, Romanos Ioannidis, Evangelia Frangedaki, G.-Fivos Sargentis, and Demetris Koutsoyiannis
Published in: European Geosciences Union General Assembly 2019,, Issue EGU2019-15297, 2019
Publisher: European Geosciences Union General Assembly 2019,

Effects of roller bending on curved constructional steels of rectangular hollow section

Author(s): Ilias D. Thanasoulas*, Charis J. Gantes
Published in: Proceedings of the IASS Symposium 2018 Creativity in Structural Design, 2018
Publisher: MIT

Overview of Scissor-Type, Bi-Stable Deployable Structures

Author(s): Charis Gantes
Published in: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Publisher: MIT

Nonlinear Finite Element Analysis of Steel-Concrete-Steel Sandwich Wind Turbine Towers

Author(s): Vernardos, S.M., Papageorgiou, N. and Gantes, C.J.
Published in: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Publisher: MIT

Structural Optimization of Tubular Steel Wind Turbine Towers with Respect to Buckling

Author(s): Koulatsou, K.G. and Gantes, C.J.
Published in: Form and Force: IASS Annual Symposium 2019 – Structural Membranes 2019, 2019
Publisher: IASS

Analysis and development of an adaptive façade system integrated on a multi-storey office building

Author(s): Couvelas, A., Matheou, M., Phocas, M.C.
Published in: Proceedings of The Tenth International Conference on Engineering Computational Technology. Optimization Driven Architectural Design of Structures, 2018
Publisher: Engineering Computational Technology

Dynamic Shelter Structure

Author(s): Maden, F.; Ölmez, D.; Gür, Ş.; Uncu, M.Y.; Mitropoulou, C.
Published in: 4th International Conference Structures and Architecture, 2019
Publisher: ICSA
DOI: 10.5281/zenodo.3593758

Optimization of a Sail-Shaped Façade Structure of a Multi-Storey Office Building

Author(s): Maden, Feray; Yıldırım, Erinç; Ölmez, Duhan; Couvelas, Agnes
Published in: Issue 2, 2019
Publisher: OPTARCH2019
DOI: 10.5281/zenodo.3571373

Dynamic Façade Design based on Visual Comfort and Daylight Performance Optimization

Author(s): Uncu, Müjde; Maden, Feray; Ölmez, Duhan
Published in: 2019
Publisher: OPTARCH2019
DOI: 10.5281/zenodo.3571363

Structural Comparison of Scissor-hinge Linkages

Author(s): Maden, Feray; Akgün, Y.; Yücetürk, K.; Aktaş, E.; Uncu, M.Y.; Mitropoulou, C.
Published in: 4th International Conference Structures and Architecture, 2019
Publisher: ICSA
DOI: 10.5281/zenodo.3593754

A Case Study on the Selection of Optimum Loop Units for the Deployable Arc Structures Exposed to Lateral and Non-Uniform Gravity Loads

Author(s): Yücetürk, Kutay; Aktaş, Engin; Maden, Feray; Gur, Şebnem; Mitropoulou, Chara
Published in: Issue 13, 2019
Publisher: OPTARCH2019
DOI: 10.5281/zenodo.3571370

Weight and Material Optimization of Scissor-hinge Structures According to the Various Span Lengths

Author(s): Akgün, Yenal; Maden, Feray; Yıldırım, Erinç
Published in: Issue 23, 2019
Publisher: OPTARCH2019
DOI: 10.5281/zenodo.3568013

"WEEKLY WORKSHOP - SEMINAR: ""Eco-Construction and Bioclimatic Approach in Architecture"" October 18-24, 2019 Volos"

Author(s): G.-Fivos Sargentis
Published in: 2019
Publisher: SADAS-PEA

OPTIMIZATION IN ENGINEERING ASPECTS OF CONSTRUCTIONS WITH EARTH BY LABORATORY TESTS. A proposed methodology for the proper soil. Examples of modern houses built with earth in Greece.

Author(s): Evangelia Frangedaki, Giuseppe Leonardo Cascella, G.-Fivos Sargentis,Konstantinos Katavoutas
Published in: 2019
Publisher: IDEA75

OPTIMIZING TECHNICAL DECISIONS WITH A WEB PLATFORM. Case study: methods & criteria of assessing building materials to optimize selection in terms of eco-behavior

Author(s): G.-Fivos Sargentis, Evangelia Frangedaki, Giuseppe Leonardo Cascella, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Mario Spinelli
Published in: 2019
Publisher: IDEA75

" SSSM17: Second International Summer School ""Structural Morphology"" (Fuzhou, September 18-29, 2017) "

Author(s): Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Published in: Workshop, Issue 1, 2017
Publisher: NTUA, Fuzhou University
DOI: 10.5281/zenodo.3561325

"SSSM18: Third International Summer School ""Structural Morphology"" (Fuzhou, September 17-29, 2018)"

Author(s): Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Published in: Summer School / Workshop, Issue 3, 2018
Publisher: Fuzhou University
DOI: 10.5281/zenodo.3561326

Η Μέθοδος της Ομογενοποίησης στο Πρόβλημα Βελτιστοποίησης Τοπολογίας

Author(s): Κωνσταντίνος – Ιάσων Υψηλάντης
Published in: Master Thesis, Issue 19, 2019
Publisher: NTUA
DOI: 10.5281/zenodo.3562219

Εφαρμογή Συνελικτικών Νευρωνικών Δικτύων στην επίλυση του προβλήματος Ελαχιστοποίησης της Ενδοσιμότητας με τη μέθοδο SIMP

Author(s): Κωνσταντίνος Κριτσέλης
Published in: Master Thesis, Issue 12, 2019
Publisher: NTUA
DOI: 10.5281/zenodo.3562213

Ανάπτυξη εφαρμογής στατικής ανάλυσης φορέων στο διαδίκτυο

Author(s): Παντελεήμων Α. Τσάκαλης
Published in: Diploma Thesis, Issue 35, 2019
Publisher: NTUA
DOI: 10.5281/zenodo.3562203

Synthesis of Scalable Planar Scissor Linkages with Anti-parallelogram Loops

Author(s): Şebnem Gür, Cevahir Karagöz, Gökhan Kiper, Koray Korkmaz
Published in: EuCoMeS 2018 - Proceedings of the 7th European Conference on Mechanism Science, Issue 59, 2019, Page(s) 417-424, ISBN 978-3-319-98019-5
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-98020-1_49

Multi-storey Structures with Seismic Isolation at Storey-Levels

Author(s): Marios C. Phocas, George Pamboris
Published in: Computational Methods in Earthquake Engineering, Issue 44, 2017, Page(s) 261-284, ISBN 978-3-319-47796-1
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-47798-5_9

Searching for OpenAIRE data...

Deliverables

Publications

Share this page

Download