Optimization Driven Architectural Design of Structures

Risultati finali

(7.2) 6 Conference Presentations

6 presentations in international conferences for Tasks 7.1 to 7.10

(7.1) 4 Journal Publications

4 journal publications for Tasks 7.1 to 7.10

(6.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 6.1, 6.2 and 6.3

(2.3) 2 Conference Presentations

2 presentations in international conferences Tasks 2.2, 2.3 and 2.4

(1.1) 3 Conference Presentations

Three conference papers for tasks 1.1, 1.2 & 1.3.

(4.1) 3 Journal Publications

3 journal publications for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(6.1) 2 Journal Publications

2 journal publication for Tasks 6.1, 6.2 and 6.3

(5.1) 2 Journal Publications, 2 Publications

2 journal publication and 2 publication in architecture-related magazine for Tasks 5.1, 5.2 and 5.3

(5.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 5.1, 5.2 and 5.3

(2.2) 3 Journal Publications, 2 Publications

3 journal publication and 2 publication in architecture-related magazines for Tasks 2.2, 2.3 and 2.5

(4.2) 5 Conference Presentations

5 presentations in international conferences for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(3.1) 2 Journal Publications

2 journal publications for Tasks 3.1, 3.2 and 3.3

(8.1) Participation in OPT-ii 2016 and OPT-iii 2018

Participation of early stage and experienced researchers of the participant countries of the Network in OPT-ii 2016 and in OPT-iii 2018 for Task 8.1

(8.2) 3-4 Diploma Thesis annually

Three to four Diploma Theses are expected to be carried out per year of the project for Task 8.2

(8.3) Participation in the International Seminars on Optimization Driven Architecture

Participation of early stage researchers of the participant countries of the Network in the International Seminars on Optimization Driven Architecture for Task 8.3

Pubblicazioni

DzAIℕ: Deep learning based generative design

Autori: Nikos Ath. Kallioras, Nikos D. Lagaros
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 591-598, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.251

Automated Optimal Motion Sequence of a 9-Bar Linkage

Autori: Maria Matheou, Nikos Ath, Kallioras, Nikos D. Lagaros and Marios C. Phocas
Pubblicato in: Frontiers in Built Environment, 2020, ISSN 2297-3362
Editore: Frontires Media S.A.
DOI: 10.3389/fbuil.2020.00132

Bioclimatic building design theory and application

Autori: Agnes Couvelas
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 326-333, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.238

Transformable building envelope design in architectural education

Autori: Maria Matheou, Agnes Couvelas, Marios C. Phocas
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 116-123, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.212

Optimal Design of Elastic Circular Plane Arches

Autori: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Pubblicato in: Frontiers in Built Environment, Numero 6, 2020, ISSN 2297-3362
Editore: Frontiers Media S.A.
DOI: 10.3389/fbuil.2020.00074

Multi-axis 3D printing of material reduced shell structures on a reconfigurable supporting system using topology optimization principles

Autori: Odysseas Kontovourkis, Marios C. Phocas, George Tryfonos, Christos Georgiou
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 379-386, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.280

A preliminary study on a variable section beam through Algorithm-Aided Design: a way to connect architectural shape and structural optimization

Autori: Laura Sardone, Rita Greco, Alessandra Fiore, Carlo Moccia, Domenico De Tommasi, Nikos D. Lagaros
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 497-504, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.264

Structural optimization of elastic circular arches and design criteria

Autori: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 425-432, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.274

A Case Study on the Selection of Optimum Loop Units for the Deployable Arch Structures Exposed to Lateral and Non-uniform Gravity Loads

Autori: K. Yücetürk, E. Aktaş, F. Maden, Ş. Gur, C.C. Mitropoulou
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 481-488, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.267

Volume/thrust optimal shape criteria for arches under static vertical loads

Autori: Giuseppe Carlo Marano; Francesco Trentaduea; Rita Greco; Ivo Vanzi; Bruno Briseghella
Pubblicato in: Journal of Traffic and Transportation Engineering (English Edition), Numero 17, 2018, ISSN 2095-7564
Editore: Elsevier
DOI: 10.1016/j.jtte.2018.10.005

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing

Autori: Georgios Kazakis, Ioannis Kanellopoulos, Stefanos Sotiropoulos, Nikos D. Lagaros
Pubblicato in: Heliyon, Numero 3/10, 2017, Pagina/e e00431, ISSN 2405-8440
Editore: Elsevier
DOI: 10.1016/j.heliyon.2017.e00431

Construction of currency portfolios by means of an optimized investment strategy

Autori: Spyros K. Chandrinos, Nikos D. Lagaros
Pubblicato in: Operations Research Perspectives, Numero 5, 2018, Pagina/e 32-44, ISSN 2214-7160
Editore: Elsevier BV
DOI: 10.1016/j.orp.2018.01.001

Smoothed reduction of fracture mechanics solutions to 1D cracked models

Autori: Stavros Chatzieleftheriou, Nikos D. Lagaros
Pubblicato in: European Journal of Mechanics - A/Solids, Numero 69, 2018, Pagina/e 12-22, ISSN 0997-7538
Editore: Elsevier BV
DOI: 10.1016/j.euromechsol.2017.11.009

Geometric constraints for shape and topology optimization in architectural design

Autori: Charles Dapogny, Alexis Faure, George Michailidis, Gregoire Allaire, Agnes Couvelas, Rafael Estevez
Pubblicato in: Computational mechanics, 2017, ISSN 0178-7675
Editore: Springer Verlag
DOI: 10.1007/s00466-017-1383-6

"A C# code for solving 3D topology optimization problems using SAP2000"

Autori: Nikos D. Lagaros; Nikos Vasileiou; Georgios Kazakis
Pubblicato in: Optimization in Engineering, Numero 8, 2018, ISSN 1573-2924
Editore: Springer
DOI: 10.5281/zenodo.2580082

Damage Index-Based Lower Bound Structural Design

Autori: Chara Ch. Mitropoulou, Giuseppe C. Marano, Nikos D. Lagaros
Pubblicato in: Frontiers in Built Environment, Numero 4, 2018, ISSN 2297-3362
Editore: Frontiers
DOI: 10.3389/fbuil.2018.00032

The Development of the Athens Water Supply System and Inferences for Optimizing the Scale of Water Infrastructures

Autori: G.-Fivos Sargentis, Romanos Ioannidis, Georgios Karakatsanis, Stavroula Sigourou, Nikos D. Lagaros, Demetris Koutsoyiannis
Pubblicato in: Sustainability, Numero 11/9, 2019, Pagina/e 2657, ISSN 2071-1050
Editore: MDPI Open Access Publishing
DOI: 10.3390/su11092657

The Environmental and Economic Impact of Structural Optimization

Autori: Nikos D. Lagaros
Pubblicato in: Structural and Multidisciplinary Optimization, Numero 1, 2018, ISSN 1615-147X
Editore: Springer Verlag
DOI: 10.5281/zenodo.2580100

Environmental Assessment of Cost Optimized Structural Systems in Tall Buildings

Autori: Dimitris Mavrokapnidis; Chara Ch. Mitropoulou; Nikos D. Lagaros
Pubblicato in: Journal of Building Engineering, Numero 6, 2019, ISSN 2352-7102
Editore: Springer
DOI: 10.5281/zenodo.2620160

The Impact of Asphalt Wearing Surface Thickness on Response of Two-Span Continuous Cast-in-Place Prestressed Concrete Box Girder Highway Bridge

Autori: Khairedin M. Abdalla, Rajai Z. Al-Rousan, Mohammed T. Obaidat, Osama K. Nusier, Khaldoon Bani-Hani, Nikos D. Lagaros
Pubblicato in: Journal of Engineering Science and Technology Review, Numero 12/1, 2019, Pagina/e 173-177, ISSN 1791-9320
Editore: Kavala Institute of Technology
DOI: 10.25103/jestr.121.20

Nested Topology Optimization Methodology for Designing Two-Wheel Chassis

Autori: Stefanos E. Manios, Nikos D. Lagaros, Elias Nassiopoulos
Pubblicato in: Frontiers in Built Environment, Numero 5, 2019, ISSN 2297-3362
Editore: Frontiers
DOI: 10.3389/fbuil.2019.00034

A novel planar scissor structure transforming between concave and convex configurations

Autori: M. Yar, K. Korkmaz, G. Kiper, F. Maden, Y. Akgün, E. Aktaş
Pubblicato in: International Journal of Computational Methods and Experimental Measurements, Numero 5/4, 2017, Pagina/e 442-450, ISSN 2046-0546
Editore: WIT Press
DOI: 10.2495/cmem-v5-n4-442-450

Digital to physical development of a reconfigurable modular formwork for concrete casting and assembling of a shell structure

Autori: Odysseas Kontovourkis, Marios C. Phocas, Constantinos Katsambas
Pubblicato in: Automation in Construction, Numero 106, 2019, Pagina/e 102855, ISSN 0926-5805
Editore: Elsevier BV
DOI: 10.1016/j.autcon.2019.102855

Structural optimization under overhang constraints imposed by additive manufacturing technologies

Autori: G. Allaire, C. Dapogny, R. Estevez, A. Faure, G. Michailidis
Pubblicato in: Journal of Computational Physics, Numero 351, 2017, Pagina/e 295-328, ISSN 0021-9991
Editore: Academic Press
DOI: 10.1016/j.jcp.2017.09.041

Stochastic Evaluation of Landscapes Transformed by Renewable Energy Installations and Civil Works

Autori: G.-Fivos Sargentis, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Demetris Koutsoyiannis
Pubblicato in: Energies, Numero 12/14, 2019, Pagina/e 2817, ISSN 1996-1073
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12142817

Fujian Tulou Rammed Earth Structures: Optimizing Restoration Techniques Through Participatory Design and Collective Practices

Autori: Evangelia Frangedaki, Xihong Gao, Nikos D. Lagaros, Bruno Briseghella, Giuseppe Carlo Marano, G. Fivos Sargentis, Nikiforos Meimaroglou
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 92-99, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.209

Parametric Design: formal and structural connection for a pedestrian bridge in the archeological area of Roca Vecchia (IT)

Autori: G. Cesario, L. Sardone, R. Greco, Cascella, Spinelli, G.C. Marano
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 473-480, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.268

Weight and Material Optimization of Scissor-hinge Linkages According to Given Span Length

Autori: Yenal Akgün, Feray Maden, Erinç Yıldırım
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 387-393, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.279

Resonance Investigation and its Effects on Weight Optimization of Tubular Steel Wind Turbine Towers

Autori: Konstantina G. Koulatsou, George Kazakis, Charis J. Gantes, Nikos D. Lagaros
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 4-11, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.198

Motion Sequence Optimization of a Planar Structure

Autori: Maria Matheou, Nikos A. Kallioras, Nikos D. Lagaros, Marios C. Phocas
Pubblicato in: Procedia Manufacturing, Numero 44, 2020, Pagina/e 310-317, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2020.02.236

Radially expandable ring-like structure with antiparallelogram loops

Autori: Gür, Ş., Korkmaz. K., Kiper, G.
Pubblicato in: International Symposium of Mechanism and Machine Science, 2017 AzC IFToMM – Azerbaijan Technical University 11-14 September 2017, Baku, Azerbaijan, 2017, Pagina/e 150-155
Editore: Azerbaijan Technical University
DOI: 10.5281/zenodo.3592391

Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale

Autori: Kontovourkis O
Pubblicato in: Proceedings of the 35th Conference on Education in Computer Aided Architectural Design in Europe: ShoCK! - Sharing Computational Knowledge! (Volume 2)., 2017, Pagina/e 125-134
Editore: Sapienza University of Rome
DOI: 10.5281/zenodo.3574318

Development of a web platform of knowledge exchange for optimal selection of building materials based on ecological criteria

Autori: George-Fivos Sargentis, Evangelia Frangedaki, Panayiotis Dimitriadis, and Demetris Koutsoyiannis
Pubblicato in: European Geosciences Union General Assembly 2019, Numero EGU2019-10395, 2019
Editore: European Geosciences Union General Assembly 2019

Stochastic similarities between natural processes and art: Application in the analysis and optimization of landscape aesthetics of renewable energy and civil works

Autori: Romanos Ioannidis, Panayiotis Dimitriadis, G.-Fivos Sargentis, Evangelia Frangedaki, Theano Iliopoulou, and Demetris Koutsoyiannis
Pubblicato in: European Geosciences Union General Assembly 2019, Numero EGU2019-11403, 2019
Editore: European Geosciences Union General Assembly 2019

"Optimizing engineering aspects of earth constructions. The earth as ""common"" material."

Autori: Evangelia Frangedaki and G.-Fivos Sargentis
Pubblicato in: European Geosciences Union General Assembly 2019, Numero EGU2019-11412, 2019
Editore: European Geosciences Union General Assembly 2019

Optimizing the size of Hilarion dam with technical, economical and environmental parameters.

Autori: Maria Sako, Eleni Tsoli, Romanos Ioannidis, Evangelia Frangedaki, G.-Fivos Sargentis, and Demetris Koutsoyiannis
Pubblicato in: European Geosciences Union General Assembly 2019,, Numero EGU2019-15297, 2019
Editore: European Geosciences Union General Assembly 2019,

Effects of roller bending on curved constructional steels of rectangular hollow section

Autori: Ilias D. Thanasoulas*, Charis J. Gantes
Pubblicato in: Proceedings of the IASS Symposium 2018 Creativity in Structural Design, 2018
Editore: MIT

Overview of Scissor-Type, Bi-Stable Deployable Structures

Autori: Charis Gantes
Pubblicato in: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Editore: MIT

Nonlinear Finite Element Analysis of Steel-Concrete-Steel Sandwich Wind Turbine Towers

Autori: Vernardos, S.M., Papageorgiou, N. and Gantes, C.J.
Pubblicato in: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Editore: MIT

Structural Optimization of Tubular Steel Wind Turbine Towers with Respect to Buckling

Autori: Koulatsou, K.G. and Gantes, C.J.
Pubblicato in: Form and Force: IASS Annual Symposium 2019 – Structural Membranes 2019, 2019
Editore: IASS

Analysis and development of an adaptive façade system integrated on a multi-storey office building

Autori: Couvelas, A., Matheou, M., Phocas, M.C.
Pubblicato in: Proceedings of The Tenth International Conference on Engineering Computational Technology. Optimization Driven Architectural Design of Structures, 2018
Editore: Engineering Computational Technology

Dynamic Shelter Structure

Autori: Maden, F.; Ölmez, D.; Gür, Ş.; Uncu, M.Y.; Mitropoulou, C.
Pubblicato in: 4th International Conference Structures and Architecture, 2019
Editore: ICSA
DOI: 10.5281/zenodo.3593758

Optimization of a Sail-Shaped Façade Structure of a Multi-Storey Office Building

Autori: Maden, Feray; Yıldırım, Erinç; Ölmez, Duhan; Couvelas, Agnes
Pubblicato in: Numero 2, 2019
Editore: OPTARCH2019
DOI: 10.5281/zenodo.3571373

Dynamic Façade Design based on Visual Comfort and Daylight Performance Optimization

Autori: Uncu, Müjde; Maden, Feray; Ölmez, Duhan
Pubblicato in: 2019
Editore: OPTARCH2019
DOI: 10.5281/zenodo.3571363

Structural Comparison of Scissor-hinge Linkages

Autori: Maden, Feray; Akgün, Y.; Yücetürk, K.; Aktaş, E.; Uncu, M.Y.; Mitropoulou, C.
Pubblicato in: 4th International Conference Structures and Architecture, 2019
Editore: ICSA
DOI: 10.5281/zenodo.3593754

A Case Study on the Selection of Optimum Loop Units for the Deployable Arc Structures Exposed to Lateral and Non-Uniform Gravity Loads

Autori: Yücetürk, Kutay; Aktaş, Engin; Maden, Feray; Gur, Şebnem; Mitropoulou, Chara
Pubblicato in: Numero 13, 2019
Editore: OPTARCH2019
DOI: 10.5281/zenodo.3571370

Weight and Material Optimization of Scissor-hinge Structures According to the Various Span Lengths

Autori: Akgün, Yenal; Maden, Feray; Yıldırım, Erinç
Pubblicato in: Numero 23, 2019
Editore: OPTARCH2019
DOI: 10.5281/zenodo.3568013

"WEEKLY WORKSHOP - SEMINAR: ""Eco-Construction and Bioclimatic Approach in Architecture"" October 18-24, 2019 Volos"

Autori: G.-Fivos Sargentis
Pubblicato in: 2019
Editore: SADAS-PEA

OPTIMIZATION IN ENGINEERING ASPECTS OF CONSTRUCTIONS WITH EARTH BY LABORATORY TESTS. A proposed methodology for the proper soil. Examples of modern houses built with earth in Greece.

Autori: Evangelia Frangedaki, Giuseppe Leonardo Cascella, G.-Fivos Sargentis,Konstantinos Katavoutas
Pubblicato in: 2019
Editore: IDEA75

OPTIMIZING TECHNICAL DECISIONS WITH A WEB PLATFORM. Case study: methods & criteria of assessing building materials to optimize selection in terms of eco-behavior

Autori: G.-Fivos Sargentis, Evangelia Frangedaki, Giuseppe Leonardo Cascella, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Mario Spinelli
Pubblicato in: 2019
Editore: IDEA75

" SSSM17: Second International Summer School ""Structural Morphology"" (Fuzhou, September 18-29, 2017) "

Autori: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Pubblicato in: Workshop, Numero 1, 2017
Editore: NTUA, Fuzhou University
DOI: 10.5281/zenodo.3561325

"SSSM18: Third International Summer School ""Structural Morphology"" (Fuzhou, September 17-29, 2018)"

Autori: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Pubblicato in: Summer School / Workshop, Numero 3, 2018
Editore: Fuzhou University
DOI: 10.5281/zenodo.3561326

Η Μέθοδος της Ομογενοποίησης στο Πρόβλημα Βελτιστοποίησης Τοπολογίας

Autori: Κωνσταντίνος – Ιάσων Υψηλάντης
Pubblicato in: Master Thesis, Numero 19, 2019
Editore: NTUA
DOI: 10.5281/zenodo.3562219

Εφαρμογή Συνελικτικών Νευρωνικών Δικτύων στην επίλυση του προβλήματος Ελαχιστοποίησης της Ενδοσιμότητας με τη μέθοδο SIMP

Autori: Κωνσταντίνος Κριτσέλης
Pubblicato in: Master Thesis, Numero 12, 2019
Editore: NTUA
DOI: 10.5281/zenodo.3562213

Ανάπτυξη εφαρμογής στατικής ανάλυσης φορέων στο διαδίκτυο

Autori: Παντελεήμων Α. Τσάκαλης
Pubblicato in: Diploma Thesis, Numero 35, 2019
Editore: NTUA
DOI: 10.5281/zenodo.3562203

Synthesis of Scalable Planar Scissor Linkages with Anti-parallelogram Loops

Autori: Şebnem Gür, Cevahir Karagöz, Gökhan Kiper, Koray Korkmaz
Pubblicato in: EuCoMeS 2018 - Proceedings of the 7th European Conference on Mechanism Science, Numero 59, 2019, Pagina/e 417-424, ISBN 978-3-319-98019-5
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-98020-1_49

Multi-storey Structures with Seismic Isolation at Storey-Levels

Autori: Marios C. Phocas, George Pamboris
Pubblicato in: Computational Methods in Earthquake Engineering, Numero 44, 2017, Pagina/e 261-284, ISBN 978-3-319-47796-1
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-47798-5_9

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica