Optimization Driven Architectural Design of Structures

Livrables

(7.2) 6 Conference Presentations

6 presentations in international conferences for Tasks 7.1 to 7.10

(7.1) 4 Journal Publications

4 journal publications for Tasks 7.1 to 7.10

(6.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 6.1, 6.2 and 6.3

(2.3) 2 Conference Presentations

2 presentations in international conferences Tasks 2.2, 2.3 and 2.4

(1.1) 3 Conference Presentations

Three conference papers for tasks 1.1, 1.2 & 1.3.

(4.1) 3 Journal Publications

3 journal publications for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(6.1) 2 Journal Publications

2 journal publication for Tasks 6.1, 6.2 and 6.3

(5.1) 2 Journal Publications, 2 Publications

2 journal publication and 2 publication in architecture-related magazine for Tasks 5.1, 5.2 and 5.3

(5.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 5.1, 5.2 and 5.3

(2.2) 3 Journal Publications, 2 Publications

3 journal publication and 2 publication in architecture-related magazines for Tasks 2.2, 2.3 and 2.5

(4.2) 5 Conference Presentations

5 presentations in international conferences for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(3.1) 2 Journal Publications

2 journal publications for Tasks 3.1, 3.2 and 3.3

(8.1) Participation in OPT-ii 2016 and OPT-iii 2018

Participation of early stage and experienced researchers of the participant countries of the Network in OPT-ii 2016 and in OPT-iii 2018 for Task 8.1

(8.2) 3-4 Diploma Thesis annually

Three to four Diploma Theses are expected to be carried out per year of the project for Task 8.2

(8.3) Participation in the International Seminars on Optimization Driven Architecture

Participation of early stage researchers of the participant countries of the Network in the International Seminars on Optimization Driven Architecture for Task 8.3

Publications

DzAIℕ: Deep learning based generative design

Auteurs: Nikos Ath. Kallioras, Nikos D. Lagaros
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 591-598, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.251

Automated Optimal Motion Sequence of a 9-Bar Linkage

Auteurs: Maria Matheou, Nikos Ath, Kallioras, Nikos D. Lagaros and Marios C. Phocas
Publié dans: Frontiers in Built Environment, 2020, ISSN 2297-3362
Éditeur: Frontires Media S.A.
DOI: 10.3389/fbuil.2020.00132

Bioclimatic building design theory and application

Auteurs: Agnes Couvelas
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 326-333, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.238

Transformable building envelope design in architectural education

Auteurs: Maria Matheou, Agnes Couvelas, Marios C. Phocas
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 116-123, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.212

Optimal Design of Elastic Circular Plane Arches

Auteurs: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Publié dans: Frontiers in Built Environment, Numéro 6, 2020, ISSN 2297-3362
Éditeur: Frontiers Media S.A.
DOI: 10.3389/fbuil.2020.00074

Multi-axis 3D printing of material reduced shell structures on a reconfigurable supporting system using topology optimization principles

Auteurs: Odysseas Kontovourkis, Marios C. Phocas, George Tryfonos, Christos Georgiou
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 379-386, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.280

A preliminary study on a variable section beam through Algorithm-Aided Design: a way to connect architectural shape and structural optimization

Auteurs: Laura Sardone, Rita Greco, Alessandra Fiore, Carlo Moccia, Domenico De Tommasi, Nikos D. Lagaros
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 497-504, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.264

Structural optimization of elastic circular arches and design criteria

Auteurs: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 425-432, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.274

A Case Study on the Selection of Optimum Loop Units for the Deployable Arch Structures Exposed to Lateral and Non-uniform Gravity Loads

Auteurs: K. Yücetürk, E. Aktaş, F. Maden, Ş. Gur, C.C. Mitropoulou
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 481-488, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.267

Volume/thrust optimal shape criteria for arches under static vertical loads

Auteurs: Giuseppe Carlo Marano; Francesco Trentaduea; Rita Greco; Ivo Vanzi; Bruno Briseghella
Publié dans: Journal of Traffic and Transportation Engineering (English Edition), Numéro 17, 2018, ISSN 2095-7564
Éditeur: Elsevier
DOI: 10.1016/j.jtte.2018.10.005

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing

Auteurs: Georgios Kazakis, Ioannis Kanellopoulos, Stefanos Sotiropoulos, Nikos D. Lagaros
Publié dans: Heliyon, Numéro 3/10, 2017, Page(s) e00431, ISSN 2405-8440
Éditeur: Elsevier
DOI: 10.1016/j.heliyon.2017.e00431

Construction of currency portfolios by means of an optimized investment strategy

Auteurs: Spyros K. Chandrinos, Nikos D. Lagaros
Publié dans: Operations Research Perspectives, Numéro 5, 2018, Page(s) 32-44, ISSN 2214-7160
Éditeur: Elsevier BV
DOI: 10.1016/j.orp.2018.01.001

Smoothed reduction of fracture mechanics solutions to 1D cracked models

Auteurs: Stavros Chatzieleftheriou, Nikos D. Lagaros
Publié dans: European Journal of Mechanics - A/Solids, Numéro 69, 2018, Page(s) 12-22, ISSN 0997-7538
Éditeur: Elsevier BV
DOI: 10.1016/j.euromechsol.2017.11.009

Geometric constraints for shape and topology optimization in architectural design

Auteurs: Charles Dapogny, Alexis Faure, George Michailidis, Gregoire Allaire, Agnes Couvelas, Rafael Estevez
Publié dans: Computational mechanics, 2017, ISSN 0178-7675
Éditeur: Springer Verlag
DOI: 10.1007/s00466-017-1383-6

"A C# code for solving 3D topology optimization problems using SAP2000"

Auteurs: Nikos D. Lagaros; Nikos Vasileiou; Georgios Kazakis
Publié dans: Optimization in Engineering, Numéro 8, 2018, ISSN 1573-2924
Éditeur: Springer
DOI: 10.5281/zenodo.2580082

Damage Index-Based Lower Bound Structural Design

Auteurs: Chara Ch. Mitropoulou, Giuseppe C. Marano, Nikos D. Lagaros
Publié dans: Frontiers in Built Environment, Numéro 4, 2018, ISSN 2297-3362
Éditeur: Frontiers
DOI: 10.3389/fbuil.2018.00032

The Development of the Athens Water Supply System and Inferences for Optimizing the Scale of Water Infrastructures

Auteurs: G.-Fivos Sargentis, Romanos Ioannidis, Georgios Karakatsanis, Stavroula Sigourou, Nikos D. Lagaros, Demetris Koutsoyiannis
Publié dans: Sustainability, Numéro 11/9, 2019, Page(s) 2657, ISSN 2071-1050
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/su11092657

The Environmental and Economic Impact of Structural Optimization

Auteurs: Nikos D. Lagaros
Publié dans: Structural and Multidisciplinary Optimization, Numéro 1, 2018, ISSN 1615-147X
Éditeur: Springer Verlag
DOI: 10.5281/zenodo.2580100

Environmental Assessment of Cost Optimized Structural Systems in Tall Buildings

Auteurs: Dimitris Mavrokapnidis; Chara Ch. Mitropoulou; Nikos D. Lagaros
Publié dans: Journal of Building Engineering, Numéro 6, 2019, ISSN 2352-7102
Éditeur: Springer
DOI: 10.5281/zenodo.2620160

The Impact of Asphalt Wearing Surface Thickness on Response of Two-Span Continuous Cast-in-Place Prestressed Concrete Box Girder Highway Bridge

Auteurs: Khairedin M. Abdalla, Rajai Z. Al-Rousan, Mohammed T. Obaidat, Osama K. Nusier, Khaldoon Bani-Hani, Nikos D. Lagaros
Publié dans: Journal of Engineering Science and Technology Review, Numéro 12/1, 2019, Page(s) 173-177, ISSN 1791-9320
Éditeur: Kavala Institute of Technology
DOI: 10.25103/jestr.121.20

Nested Topology Optimization Methodology for Designing Two-Wheel Chassis

Auteurs: Stefanos E. Manios, Nikos D. Lagaros, Elias Nassiopoulos
Publié dans: Frontiers in Built Environment, Numéro 5, 2019, ISSN 2297-3362
Éditeur: Frontiers
DOI: 10.3389/fbuil.2019.00034

A novel planar scissor structure transforming between concave and convex configurations

Auteurs: M. Yar, K. Korkmaz, G. Kiper, F. Maden, Y. Akgün, E. Aktaş
Publié dans: International Journal of Computational Methods and Experimental Measurements, Numéro 5/4, 2017, Page(s) 442-450, ISSN 2046-0546
Éditeur: WIT Press
DOI: 10.2495/cmem-v5-n4-442-450

Digital to physical development of a reconfigurable modular formwork for concrete casting and assembling of a shell structure

Auteurs: Odysseas Kontovourkis, Marios C. Phocas, Constantinos Katsambas
Publié dans: Automation in Construction, Numéro 106, 2019, Page(s) 102855, ISSN 0926-5805
Éditeur: Elsevier BV
DOI: 10.1016/j.autcon.2019.102855

Structural optimization under overhang constraints imposed by additive manufacturing technologies

Auteurs: G. Allaire, C. Dapogny, R. Estevez, A. Faure, G. Michailidis
Publié dans: Journal of Computational Physics, Numéro 351, 2017, Page(s) 295-328, ISSN 0021-9991
Éditeur: Academic Press
DOI: 10.1016/j.jcp.2017.09.041

Stochastic Evaluation of Landscapes Transformed by Renewable Energy Installations and Civil Works

Auteurs: G.-Fivos Sargentis, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Demetris Koutsoyiannis
Publié dans: Energies, Numéro 12/14, 2019, Page(s) 2817, ISSN 1996-1073
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12142817

Fujian Tulou Rammed Earth Structures: Optimizing Restoration Techniques Through Participatory Design and Collective Practices

Auteurs: Evangelia Frangedaki, Xihong Gao, Nikos D. Lagaros, Bruno Briseghella, Giuseppe Carlo Marano, G. Fivos Sargentis, Nikiforos Meimaroglou
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 92-99, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.209

Parametric Design: formal and structural connection for a pedestrian bridge in the archeological area of Roca Vecchia (IT)

Auteurs: G. Cesario, L. Sardone, R. Greco, Cascella, Spinelli, G.C. Marano
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 473-480, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.268

Weight and Material Optimization of Scissor-hinge Linkages According to Given Span Length

Auteurs: Yenal Akgün, Feray Maden, Erinç Yıldırım
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 387-393, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.279

Resonance Investigation and its Effects on Weight Optimization of Tubular Steel Wind Turbine Towers

Auteurs: Konstantina G. Koulatsou, George Kazakis, Charis J. Gantes, Nikos D. Lagaros
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 4-11, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.198

Motion Sequence Optimization of a Planar Structure

Auteurs: Maria Matheou, Nikos A. Kallioras, Nikos D. Lagaros, Marios C. Phocas
Publié dans: Procedia Manufacturing, Numéro 44, 2020, Page(s) 310-317, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.02.236

Radially expandable ring-like structure with antiparallelogram loops

Auteurs: Gür, Ş., Korkmaz. K., Kiper, G.
Publié dans: International Symposium of Mechanism and Machine Science, 2017 AzC IFToMM – Azerbaijan Technical University 11-14 September 2017, Baku, Azerbaijan, 2017, Page(s) 150-155
Éditeur: Azerbaijan Technical University
DOI: 10.5281/zenodo.3592391

Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale

Auteurs: Kontovourkis O
Publié dans: Proceedings of the 35th Conference on Education in Computer Aided Architectural Design in Europe: ShoCK! - Sharing Computational Knowledge! (Volume 2)., 2017, Page(s) 125-134
Éditeur: Sapienza University of Rome
DOI: 10.5281/zenodo.3574318

Development of a web platform of knowledge exchange for optimal selection of building materials based on ecological criteria

Auteurs: George-Fivos Sargentis, Evangelia Frangedaki, Panayiotis Dimitriadis, and Demetris Koutsoyiannis
Publié dans: European Geosciences Union General Assembly 2019, Numéro EGU2019-10395, 2019
Éditeur: European Geosciences Union General Assembly 2019

Stochastic similarities between natural processes and art: Application in the analysis and optimization of landscape aesthetics of renewable energy and civil works

Auteurs: Romanos Ioannidis, Panayiotis Dimitriadis, G.-Fivos Sargentis, Evangelia Frangedaki, Theano Iliopoulou, and Demetris Koutsoyiannis
Publié dans: European Geosciences Union General Assembly 2019, Numéro EGU2019-11403, 2019
Éditeur: European Geosciences Union General Assembly 2019

"Optimizing engineering aspects of earth constructions. The earth as ""common"" material."

Auteurs: Evangelia Frangedaki and G.-Fivos Sargentis
Publié dans: European Geosciences Union General Assembly 2019, Numéro EGU2019-11412, 2019
Éditeur: European Geosciences Union General Assembly 2019

Optimizing the size of Hilarion dam with technical, economical and environmental parameters.

Auteurs: Maria Sako, Eleni Tsoli, Romanos Ioannidis, Evangelia Frangedaki, G.-Fivos Sargentis, and Demetris Koutsoyiannis
Publié dans: European Geosciences Union General Assembly 2019,, Numéro EGU2019-15297, 2019
Éditeur: European Geosciences Union General Assembly 2019,

Effects of roller bending on curved constructional steels of rectangular hollow section

Auteurs: Ilias D. Thanasoulas*, Charis J. Gantes
Publié dans: Proceedings of the IASS Symposium 2018 Creativity in Structural Design, 2018
Éditeur: MIT

Overview of Scissor-Type, Bi-Stable Deployable Structures

Auteurs: Charis Gantes
Publié dans: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Éditeur: MIT

Nonlinear Finite Element Analysis of Steel-Concrete-Steel Sandwich Wind Turbine Towers

Auteurs: Vernardos, S.M., Papageorgiou, N. and Gantes, C.J.
Publié dans: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Éditeur: MIT

Structural Optimization of Tubular Steel Wind Turbine Towers with Respect to Buckling

Auteurs: Koulatsou, K.G. and Gantes, C.J.
Publié dans: Form and Force: IASS Annual Symposium 2019 – Structural Membranes 2019, 2019
Éditeur: IASS

Analysis and development of an adaptive façade system integrated on a multi-storey office building

Auteurs: Couvelas, A., Matheou, M., Phocas, M.C.
Publié dans: Proceedings of The Tenth International Conference on Engineering Computational Technology. Optimization Driven Architectural Design of Structures, 2018
Éditeur: Engineering Computational Technology

Dynamic Shelter Structure

Auteurs: Maden, F.; Ölmez, D.; Gür, Ş.; Uncu, M.Y.; Mitropoulou, C.
Publié dans: 4th International Conference Structures and Architecture, 2019
Éditeur: ICSA
DOI: 10.5281/zenodo.3593758

Optimization of a Sail-Shaped Façade Structure of a Multi-Storey Office Building

Auteurs: Maden, Feray; Yıldırım, Erinç; Ölmez, Duhan; Couvelas, Agnes
Publié dans: Numéro 2, 2019
Éditeur: OPTARCH2019
DOI: 10.5281/zenodo.3571373

Dynamic Façade Design based on Visual Comfort and Daylight Performance Optimization

Auteurs: Uncu, Müjde; Maden, Feray; Ölmez, Duhan
Publié dans: 2019
Éditeur: OPTARCH2019
DOI: 10.5281/zenodo.3571363

Structural Comparison of Scissor-hinge Linkages

Auteurs: Maden, Feray; Akgün, Y.; Yücetürk, K.; Aktaş, E.; Uncu, M.Y.; Mitropoulou, C.
Publié dans: 4th International Conference Structures and Architecture, 2019
Éditeur: ICSA
DOI: 10.5281/zenodo.3593754

A Case Study on the Selection of Optimum Loop Units for the Deployable Arc Structures Exposed to Lateral and Non-Uniform Gravity Loads

Auteurs: Yücetürk, Kutay; Aktaş, Engin; Maden, Feray; Gur, Şebnem; Mitropoulou, Chara
Publié dans: Numéro 13, 2019
Éditeur: OPTARCH2019
DOI: 10.5281/zenodo.3571370

Weight and Material Optimization of Scissor-hinge Structures According to the Various Span Lengths

Auteurs: Akgün, Yenal; Maden, Feray; Yıldırım, Erinç
Publié dans: Numéro 23, 2019
Éditeur: OPTARCH2019
DOI: 10.5281/zenodo.3568013

"WEEKLY WORKSHOP - SEMINAR: ""Eco-Construction and Bioclimatic Approach in Architecture"" October 18-24, 2019 Volos"

Auteurs: G.-Fivos Sargentis
Publié dans: 2019
Éditeur: SADAS-PEA

OPTIMIZATION IN ENGINEERING ASPECTS OF CONSTRUCTIONS WITH EARTH BY LABORATORY TESTS. A proposed methodology for the proper soil. Examples of modern houses built with earth in Greece.

Auteurs: Evangelia Frangedaki, Giuseppe Leonardo Cascella, G.-Fivos Sargentis,Konstantinos Katavoutas
Publié dans: 2019
Éditeur: IDEA75

OPTIMIZING TECHNICAL DECISIONS WITH A WEB PLATFORM. Case study: methods & criteria of assessing building materials to optimize selection in terms of eco-behavior

Auteurs: G.-Fivos Sargentis, Evangelia Frangedaki, Giuseppe Leonardo Cascella, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Mario Spinelli
Publié dans: 2019
Éditeur: IDEA75

" SSSM17: Second International Summer School ""Structural Morphology"" (Fuzhou, September 18-29, 2017) "

Auteurs: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Publié dans: Workshop, Numéro 1, 2017
Éditeur: NTUA, Fuzhou University
DOI: 10.5281/zenodo.3561325

"SSSM18: Third International Summer School ""Structural Morphology"" (Fuzhou, September 17-29, 2018)"

Auteurs: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Publié dans: Summer School / Workshop, Numéro 3, 2018
Éditeur: Fuzhou University
DOI: 10.5281/zenodo.3561326

Η Μέθοδος της Ομογενοποίησης στο Πρόβλημα Βελτιστοποίησης Τοπολογίας

Auteurs: Κωνσταντίνος – Ιάσων Υψηλάντης
Publié dans: Master Thesis, Numéro 19, 2019
Éditeur: NTUA
DOI: 10.5281/zenodo.3562219

Εφαρμογή Συνελικτικών Νευρωνικών Δικτύων στην επίλυση του προβλήματος Ελαχιστοποίησης της Ενδοσιμότητας με τη μέθοδο SIMP

Auteurs: Κωνσταντίνος Κριτσέλης
Publié dans: Master Thesis, Numéro 12, 2019
Éditeur: NTUA
DOI: 10.5281/zenodo.3562213

Ανάπτυξη εφαρμογής στατικής ανάλυσης φορέων στο διαδίκτυο

Auteurs: Παντελεήμων Α. Τσάκαλης
Publié dans: Diploma Thesis, Numéro 35, 2019
Éditeur: NTUA
DOI: 10.5281/zenodo.3562203

Synthesis of Scalable Planar Scissor Linkages with Anti-parallelogram Loops

Auteurs: Şebnem Gür, Cevahir Karagöz, Gökhan Kiper, Koray Korkmaz
Publié dans: EuCoMeS 2018 - Proceedings of the 7th European Conference on Mechanism Science, Numéro 59, 2019, Page(s) 417-424, ISBN 978-3-319-98019-5
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-98020-1_49

Multi-storey Structures with Seismic Isolation at Storey-Levels

Auteurs: Marios C. Phocas, George Pamboris
Publié dans: Computational Methods in Earthquake Engineering, Numéro 44, 2017, Page(s) 261-284, ISBN 978-3-319-47796-1
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-47798-5_9

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger