Optimization Driven Architectural Design of Structures

Rezultaty

(7.2) 6 Conference Presentations

6 presentations in international conferences for Tasks 7.1 to 7.10

(7.1) 4 Journal Publications

4 journal publications for Tasks 7.1 to 7.10

(6.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 6.1, 6.2 and 6.3

(2.3) 2 Conference Presentations

2 presentations in international conferences Tasks 2.2, 2.3 and 2.4

(1.1) 3 Conference Presentations

Three conference papers for tasks 1.1, 1.2 & 1.3.

(4.1) 3 Journal Publications

3 journal publications for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(6.1) 2 Journal Publications

2 journal publication for Tasks 6.1, 6.2 and 6.3

(5.1) 2 Journal Publications, 2 Publications

2 journal publication and 2 publication in architecture-related magazine for Tasks 5.1, 5.2 and 5.3

(5.2) 2 Conference Presentations

2 presentations in international conferences for Tasks 5.1, 5.2 and 5.3

(2.2) 3 Journal Publications, 2 Publications

3 journal publication and 2 publication in architecture-related magazines for Tasks 2.2, 2.3 and 2.5

(4.2) 5 Conference Presentations

5 presentations in international conferences for Tasks 4.1, 4.2, 4.3, 4.4 and 4.5

(3.1) 2 Journal Publications

2 journal publications for Tasks 3.1, 3.2 and 3.3

(8.1) Participation in OPT-ii 2016 and OPT-iii 2018

Participation of early stage and experienced researchers of the participant countries of the Network in OPT-ii 2016 and in OPT-iii 2018 for Task 8.1

(8.2) 3-4 Diploma Thesis annually

Three to four Diploma Theses are expected to be carried out per year of the project for Task 8.2

(8.3) Participation in the International Seminars on Optimization Driven Architecture

Participation of early stage researchers of the participant countries of the Network in the International Seminars on Optimization Driven Architecture for Task 8.3

Publikacje

DzAIℕ: Deep learning based generative design

Autorzy: Nikos Ath. Kallioras, Nikos D. Lagaros
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 591-598, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.251

Automated Optimal Motion Sequence of a 9-Bar Linkage

Autorzy: Maria Matheou, Nikos Ath, Kallioras, Nikos D. Lagaros and Marios C. Phocas
Opublikowane w: Frontiers in Built Environment, 2020, ISSN 2297-3362
Wydawca: Frontires Media S.A.
DOI: 10.3389/fbuil.2020.00132

Bioclimatic building design theory and application

Autorzy: Agnes Couvelas
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 326-333, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.238

Transformable building envelope design in architectural education

Autorzy: Maria Matheou, Agnes Couvelas, Marios C. Phocas
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 116-123, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.212

Optimal Design of Elastic Circular Plane Arches

Autorzy: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Opublikowane w: Frontiers in Built Environment, Numer 6, 2020, ISSN 2297-3362
Wydawca: Frontiers Media S.A.
DOI: 10.3389/fbuil.2020.00074

Multi-axis 3D printing of material reduced shell structures on a reconfigurable supporting system using topology optimization principles

Autorzy: Odysseas Kontovourkis, Marios C. Phocas, George Tryfonos, Christos Georgiou
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 379-386, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.280

A preliminary study on a variable section beam through Algorithm-Aided Design: a way to connect architectural shape and structural optimization

Autorzy: Laura Sardone, Rita Greco, Alessandra Fiore, Carlo Moccia, Domenico De Tommasi, Nikos D. Lagaros
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 497-504, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.264

Structural optimization of elastic circular arches and design criteria

Autorzy: Francesco Trentadue, Alessandra Fiore, Rita Greco, Giuseppe C. Marano, Nikos D. Lagaros
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 425-432, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.274

A Case Study on the Selection of Optimum Loop Units for the Deployable Arch Structures Exposed to Lateral and Non-uniform Gravity Loads

Autorzy: K. Yücetürk, E. Aktaş, F. Maden, Ş. Gur, C.C. Mitropoulou
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 481-488, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.267

Volume/thrust optimal shape criteria for arches under static vertical loads

Autorzy: Giuseppe Carlo Marano; Francesco Trentaduea; Rita Greco; Ivo Vanzi; Bruno Briseghella
Opublikowane w: Journal of Traffic and Transportation Engineering (English Edition), Numer 17, 2018, ISSN 2095-7564
Wydawca: Elsevier
DOI: 10.1016/j.jtte.2018.10.005

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing

Autorzy: Georgios Kazakis, Ioannis Kanellopoulos, Stefanos Sotiropoulos, Nikos D. Lagaros
Opublikowane w: Heliyon, Numer 3/10, 2017, Strona(/y) e00431, ISSN 2405-8440
Wydawca: Elsevier
DOI: 10.1016/j.heliyon.2017.e00431

Construction of currency portfolios by means of an optimized investment strategy

Autorzy: Spyros K. Chandrinos, Nikos D. Lagaros
Opublikowane w: Operations Research Perspectives, Numer 5, 2018, Strona(/y) 32-44, ISSN 2214-7160
Wydawca: Elsevier BV
DOI: 10.1016/j.orp.2018.01.001

Smoothed reduction of fracture mechanics solutions to 1D cracked models

Autorzy: Stavros Chatzieleftheriou, Nikos D. Lagaros
Opublikowane w: European Journal of Mechanics - A/Solids, Numer 69, 2018, Strona(/y) 12-22, ISSN 0997-7538
Wydawca: Elsevier BV
DOI: 10.1016/j.euromechsol.2017.11.009

Geometric constraints for shape and topology optimization in architectural design

Autorzy: Charles Dapogny, Alexis Faure, George Michailidis, Gregoire Allaire, Agnes Couvelas, Rafael Estevez
Opublikowane w: Computational mechanics, 2017, ISSN 0178-7675
Wydawca: Springer Verlag
DOI: 10.1007/s00466-017-1383-6

"A C# code for solving 3D topology optimization problems using SAP2000"

Autorzy: Nikos D. Lagaros; Nikos Vasileiou; Georgios Kazakis
Opublikowane w: Optimization in Engineering, Numer 8, 2018, ISSN 1573-2924
Wydawca: Springer
DOI: 10.5281/zenodo.2580082

Damage Index-Based Lower Bound Structural Design

Autorzy: Chara Ch. Mitropoulou, Giuseppe C. Marano, Nikos D. Lagaros
Opublikowane w: Frontiers in Built Environment, Numer 4, 2018, ISSN 2297-3362
Wydawca: Frontiers
DOI: 10.3389/fbuil.2018.00032

The Development of the Athens Water Supply System and Inferences for Optimizing the Scale of Water Infrastructures

Autorzy: G.-Fivos Sargentis, Romanos Ioannidis, Georgios Karakatsanis, Stavroula Sigourou, Nikos D. Lagaros, Demetris Koutsoyiannis
Opublikowane w: Sustainability, Numer 11/9, 2019, Strona(/y) 2657, ISSN 2071-1050
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/su11092657

The Environmental and Economic Impact of Structural Optimization

Autorzy: Nikos D. Lagaros
Opublikowane w: Structural and Multidisciplinary Optimization, Numer 1, 2018, ISSN 1615-147X
Wydawca: Springer Verlag
DOI: 10.5281/zenodo.2580100

Environmental Assessment of Cost Optimized Structural Systems in Tall Buildings

Autorzy: Dimitris Mavrokapnidis; Chara Ch. Mitropoulou; Nikos D. Lagaros
Opublikowane w: Journal of Building Engineering, Numer 6, 2019, ISSN 2352-7102
Wydawca: Springer
DOI: 10.5281/zenodo.2620160

The Impact of Asphalt Wearing Surface Thickness on Response of Two-Span Continuous Cast-in-Place Prestressed Concrete Box Girder Highway Bridge

Autorzy: Khairedin M. Abdalla, Rajai Z. Al-Rousan, Mohammed T. Obaidat, Osama K. Nusier, Khaldoon Bani-Hani, Nikos D. Lagaros
Opublikowane w: Journal of Engineering Science and Technology Review, Numer 12/1, 2019, Strona(/y) 173-177, ISSN 1791-9320
Wydawca: Kavala Institute of Technology
DOI: 10.25103/jestr.121.20

Nested Topology Optimization Methodology for Designing Two-Wheel Chassis

Autorzy: Stefanos E. Manios, Nikos D. Lagaros, Elias Nassiopoulos
Opublikowane w: Frontiers in Built Environment, Numer 5, 2019, ISSN 2297-3362
Wydawca: Frontiers
DOI: 10.3389/fbuil.2019.00034

A novel planar scissor structure transforming between concave and convex configurations

Autorzy: M. Yar, K. Korkmaz, G. Kiper, F. Maden, Y. Akgün, E. Aktaş
Opublikowane w: International Journal of Computational Methods and Experimental Measurements, Numer 5/4, 2017, Strona(/y) 442-450, ISSN 2046-0546
Wydawca: WIT Press
DOI: 10.2495/cmem-v5-n4-442-450

Digital to physical development of a reconfigurable modular formwork for concrete casting and assembling of a shell structure

Autorzy: Odysseas Kontovourkis, Marios C. Phocas, Constantinos Katsambas
Opublikowane w: Automation in Construction, Numer 106, 2019, Strona(/y) 102855, ISSN 0926-5805
Wydawca: Elsevier BV
DOI: 10.1016/j.autcon.2019.102855

Structural optimization under overhang constraints imposed by additive manufacturing technologies

Autorzy: G. Allaire, C. Dapogny, R. Estevez, A. Faure, G. Michailidis
Opublikowane w: Journal of Computational Physics, Numer 351, 2017, Strona(/y) 295-328, ISSN 0021-9991
Wydawca: Academic Press
DOI: 10.1016/j.jcp.2017.09.041

Stochastic Evaluation of Landscapes Transformed by Renewable Energy Installations and Civil Works

Autorzy: G.-Fivos Sargentis, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Demetris Koutsoyiannis
Opublikowane w: Energies, Numer 12/14, 2019, Strona(/y) 2817, ISSN 1996-1073
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12142817

Fujian Tulou Rammed Earth Structures: Optimizing Restoration Techniques Through Participatory Design and Collective Practices

Autorzy: Evangelia Frangedaki, Xihong Gao, Nikos D. Lagaros, Bruno Briseghella, Giuseppe Carlo Marano, G. Fivos Sargentis, Nikiforos Meimaroglou
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 92-99, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.209

Parametric Design: formal and structural connection for a pedestrian bridge in the archeological area of Roca Vecchia (IT)

Autorzy: G. Cesario, L. Sardone, R. Greco, Cascella, Spinelli, G.C. Marano
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 473-480, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.268

Weight and Material Optimization of Scissor-hinge Linkages According to Given Span Length

Autorzy: Yenal Akgün, Feray Maden, Erinç Yıldırım
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 387-393, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.279

Resonance Investigation and its Effects on Weight Optimization of Tubular Steel Wind Turbine Towers

Autorzy: Konstantina G. Koulatsou, George Kazakis, Charis J. Gantes, Nikos D. Lagaros
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 4-11, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.198

Motion Sequence Optimization of a Planar Structure

Autorzy: Maria Matheou, Nikos A. Kallioras, Nikos D. Lagaros, Marios C. Phocas
Opublikowane w: Procedia Manufacturing, Numer 44, 2020, Strona(/y) 310-317, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.02.236

Radially expandable ring-like structure with antiparallelogram loops

Autorzy: Gür, Ş., Korkmaz. K., Kiper, G.
Opublikowane w: International Symposium of Mechanism and Machine Science, 2017 AzC IFToMM – Azerbaijan Technical University 11-14 September 2017, Baku, Azerbaijan, 2017, Strona(/y) 150-155
Wydawca: Azerbaijan Technical University
DOI: 10.5281/zenodo.3592391

Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale

Autorzy: Kontovourkis O
Opublikowane w: Proceedings of the 35th Conference on Education in Computer Aided Architectural Design in Europe: ShoCK! - Sharing Computational Knowledge! (Volume 2)., 2017, Strona(/y) 125-134
Wydawca: Sapienza University of Rome
DOI: 10.5281/zenodo.3574318

Development of a web platform of knowledge exchange for optimal selection of building materials based on ecological criteria

Autorzy: George-Fivos Sargentis, Evangelia Frangedaki, Panayiotis Dimitriadis, and Demetris Koutsoyiannis
Opublikowane w: European Geosciences Union General Assembly 2019, Numer EGU2019-10395, 2019
Wydawca: European Geosciences Union General Assembly 2019

Stochastic similarities between natural processes and art: Application in the analysis and optimization of landscape aesthetics of renewable energy and civil works

Autorzy: Romanos Ioannidis, Panayiotis Dimitriadis, G.-Fivos Sargentis, Evangelia Frangedaki, Theano Iliopoulou, and Demetris Koutsoyiannis
Opublikowane w: European Geosciences Union General Assembly 2019, Numer EGU2019-11403, 2019
Wydawca: European Geosciences Union General Assembly 2019

"Optimizing engineering aspects of earth constructions. The earth as ""common"" material."

Autorzy: Evangelia Frangedaki and G.-Fivos Sargentis
Opublikowane w: European Geosciences Union General Assembly 2019, Numer EGU2019-11412, 2019
Wydawca: European Geosciences Union General Assembly 2019

Optimizing the size of Hilarion dam with technical, economical and environmental parameters.

Autorzy: Maria Sako, Eleni Tsoli, Romanos Ioannidis, Evangelia Frangedaki, G.-Fivos Sargentis, and Demetris Koutsoyiannis
Opublikowane w: European Geosciences Union General Assembly 2019,, Numer EGU2019-15297, 2019
Wydawca: European Geosciences Union General Assembly 2019,

Effects of roller bending on curved constructional steels of rectangular hollow section

Autorzy: Ilias D. Thanasoulas*, Charis J. Gantes
Opublikowane w: Proceedings of the IASS Symposium 2018 Creativity in Structural Design, 2018
Wydawca: MIT

Overview of Scissor-Type, Bi-Stable Deployable Structures

Autorzy: Charis Gantes
Opublikowane w: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Wydawca: MIT

Nonlinear Finite Element Analysis of Steel-Concrete-Steel Sandwich Wind Turbine Towers

Autorzy: Vernardos, S.M., Papageorgiou, N. and Gantes, C.J.
Opublikowane w: International Association for Shell and Spatial Structures (IASS) Symposium 2018 - Creativity in Structural Design, 2018
Wydawca: MIT

Structural Optimization of Tubular Steel Wind Turbine Towers with Respect to Buckling

Autorzy: Koulatsou, K.G. and Gantes, C.J.
Opublikowane w: Form and Force: IASS Annual Symposium 2019 – Structural Membranes 2019, 2019
Wydawca: IASS

Analysis and development of an adaptive façade system integrated on a multi-storey office building

Autorzy: Couvelas, A., Matheou, M., Phocas, M.C.
Opublikowane w: Proceedings of The Tenth International Conference on Engineering Computational Technology. Optimization Driven Architectural Design of Structures, 2018
Wydawca: Engineering Computational Technology

Dynamic Shelter Structure

Autorzy: Maden, F.; Ölmez, D.; Gür, Ş.; Uncu, M.Y.; Mitropoulou, C.
Opublikowane w: 4th International Conference Structures and Architecture, 2019
Wydawca: ICSA
DOI: 10.5281/zenodo.3593758

Optimization of a Sail-Shaped Façade Structure of a Multi-Storey Office Building

Autorzy: Maden, Feray; Yıldırım, Erinç; Ölmez, Duhan; Couvelas, Agnes
Opublikowane w: Numer 2, 2019
Wydawca: OPTARCH2019
DOI: 10.5281/zenodo.3571373

Dynamic Façade Design based on Visual Comfort and Daylight Performance Optimization

Autorzy: Uncu, Müjde; Maden, Feray; Ölmez, Duhan
Opublikowane w: 2019
Wydawca: OPTARCH2019
DOI: 10.5281/zenodo.3571363

Structural Comparison of Scissor-hinge Linkages

Autorzy: Maden, Feray; Akgün, Y.; Yücetürk, K.; Aktaş, E.; Uncu, M.Y.; Mitropoulou, C.
Opublikowane w: 4th International Conference Structures and Architecture, 2019
Wydawca: ICSA
DOI: 10.5281/zenodo.3593754

A Case Study on the Selection of Optimum Loop Units for the Deployable Arc Structures Exposed to Lateral and Non-Uniform Gravity Loads

Autorzy: Yücetürk, Kutay; Aktaş, Engin; Maden, Feray; Gur, Şebnem; Mitropoulou, Chara
Opublikowane w: Numer 13, 2019
Wydawca: OPTARCH2019
DOI: 10.5281/zenodo.3571370

Weight and Material Optimization of Scissor-hinge Structures According to the Various Span Lengths

Autorzy: Akgün, Yenal; Maden, Feray; Yıldırım, Erinç
Opublikowane w: Numer 23, 2019
Wydawca: OPTARCH2019
DOI: 10.5281/zenodo.3568013

"WEEKLY WORKSHOP - SEMINAR: ""Eco-Construction and Bioclimatic Approach in Architecture"" October 18-24, 2019 Volos"

Autorzy: G.-Fivos Sargentis
Opublikowane w: 2019
Wydawca: SADAS-PEA

OPTIMIZATION IN ENGINEERING ASPECTS OF CONSTRUCTIONS WITH EARTH BY LABORATORY TESTS. A proposed methodology for the proper soil. Examples of modern houses built with earth in Greece.

Autorzy: Evangelia Frangedaki, Giuseppe Leonardo Cascella, G.-Fivos Sargentis,Konstantinos Katavoutas
Opublikowane w: 2019
Wydawca: IDEA75

OPTIMIZING TECHNICAL DECISIONS WITH A WEB PLATFORM. Case study: methods & criteria of assessing building materials to optimize selection in terms of eco-behavior

Autorzy: G.-Fivos Sargentis, Evangelia Frangedaki, Giuseppe Leonardo Cascella, Panayiotis Dimitriadis, Romanos Ioannidis, Theano Iliopoulou, Mario Spinelli
Opublikowane w: 2019
Wydawca: IDEA75

" SSSM17: Second International Summer School ""Structural Morphology"" (Fuzhou, September 18-29, 2017) "

Autorzy: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Opublikowane w: Workshop, Numer 1, 2017
Wydawca: NTUA, Fuzhou University
DOI: 10.5281/zenodo.3561325

"SSSM18: Third International Summer School ""Structural Morphology"" (Fuzhou, September 17-29, 2018)"

Autorzy: Bruno Briseghella; Giuseppe Carlo Marano; Nikos D. Lagaros
Opublikowane w: Summer School / Workshop, Numer 3, 2018
Wydawca: Fuzhou University
DOI: 10.5281/zenodo.3561326

Η Μέθοδος της Ομογενοποίησης στο Πρόβλημα Βελτιστοποίησης Τοπολογίας

Autorzy: Κωνσταντίνος – Ιάσων Υψηλάντης
Opublikowane w: Master Thesis, Numer 19, 2019
Wydawca: NTUA
DOI: 10.5281/zenodo.3562219

Εφαρμογή Συνελικτικών Νευρωνικών Δικτύων στην επίλυση του προβλήματος Ελαχιστοποίησης της Ενδοσιμότητας με τη μέθοδο SIMP

Autorzy: Κωνσταντίνος Κριτσέλης
Opublikowane w: Master Thesis, Numer 12, 2019
Wydawca: NTUA
DOI: 10.5281/zenodo.3562213

Ανάπτυξη εφαρμογής στατικής ανάλυσης φορέων στο διαδίκτυο

Autorzy: Παντελεήμων Α. Τσάκαλης
Opublikowane w: Diploma Thesis, Numer 35, 2019
Wydawca: NTUA
DOI: 10.5281/zenodo.3562203

Synthesis of Scalable Planar Scissor Linkages with Anti-parallelogram Loops

Autorzy: Şebnem Gür, Cevahir Karagöz, Gökhan Kiper, Koray Korkmaz
Opublikowane w: EuCoMeS 2018 - Proceedings of the 7th European Conference on Mechanism Science, Numer 59, 2019, Strona(/y) 417-424, ISBN 978-3-319-98019-5
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-98020-1_49

Multi-storey Structures with Seismic Isolation at Storey-Levels

Autorzy: Marios C. Phocas, George Pamboris
Opublikowane w: Computational Methods in Earthquake Engineering, Numer 44, 2017, Strona(/y) 261-284, ISBN 978-3-319-47796-1
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-47798-5_9

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz