Skip to main content

Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca

Deliverables

Project Newsletters - Period 1

1-2 newsletters will be produced per year during project Period 1.

Project leaflet and poster

Support materials to support the promotion of the project consisting in a leaflet (2 pages, A4 size) and a project poster (A1 size)

Project website

The project website will contain the following sections: home, project summary, partners profiles, news and events and project downloads (including the promotional materials, project newsletters and public deliverables). The project website will be implemented in English and Romanian.

Promotion guide about TUCN

Brochure promoting the S&T excellence of TUCN in the field of additive manufacturing. The document will consist in 30+ pages describing TUCN's RDI activities, research capacities, previous national and international projects, list of publications, research interests for further cooperation and significant achievements.

Project Newsletters -Period 2

1-2 newsletters will be produced per year during project Period 2.

One page statement that Task 4.3 has been completed

List of all publications (in the particular field of research) of the coordinator during the 3 years preceding the start date of the project.

Searching for OpenAIRE data...

Publications

Design for Additive Manufacturing, to produce assembled products, by SLS

Author(s): Nicolae Bâlc, Cristian Vilău
Published in: MATEC Web of Conferences, Issue 121, 2017, Page(s) 04002, ISSN 2261-236X
DOI: 10.1051/matecconf/201712104002

Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide

Author(s): Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 08005, ISSN 2261-236X
DOI: 10.1051/matecconf/201713708005

Carbon epoxy front hood for an electrical city vehicle

Author(s): Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes, Sergiu Solcan
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 08001, ISSN 2261-236X
DOI: 10.1051/matecconf/201713708001

ANALYSIS DISTRIBUTION OF THE EQUIVALENT PLASTIC STRAIN, CONTACT PRESSURE AND TEMPERATURE DURING THE METAL TUBES EXTRUSION

Author(s): Petru Paul DINCU, Gheorghe ACHIMAȘ, Adriana NEAG and Adrian TRIF
Published in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Issue VOL.16, ISSUE 1, 2018, ISSN 1583-7904

ANALYSIS OF CUTTING FORCES AT DRY AND NEAR-DRY TURNING OF AISI 316L STAINLESS STEEL

Author(s): Domnița FRĂȚILĂ, Adrian TRIF and Alexandru POPAN
Published in: Academic Journal of Manufacturing Engineering, Issue VOL. 16, ISSUE 4, 2018, Page(s) 19-26, ISSN 1583-7904

Design and manufacturing front hood for electric vehicle by carbon fibber

Author(s): Paul Bere, Calin Neamtu, Cristian Dudescu
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 07021, ISSN 2261-236X
DOI: 10.1051/matecconf/201711207021

Calculation of the contact surface in the orbital deformation of the cylindrical workpiece

Author(s): Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca
Published in: Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering, Issue vol 61 no 4, 2018, Page(s) 695-700, ISSN 1221-5872

Analysis and optimization of cutting parameters in drilling operation of EM AW2007 aluminum alloy

Author(s): Frăţilă, D., Popan, A
Published in: Academic Journal of Manufacturing Engineering, Issue Vol.16 No1, 2018, Page(s) 19-26, ISSN 1583-7904

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3

Author(s): Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma, Alexandru Carean
Published in: MATEC Web of Conferences, Issue 94, 2017, Page(s) 02011, ISSN 2261-236X
DOI: 10.1051/matecconf/20179402011

Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction

Author(s): Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P
Published in: Studia Universitatis Babes-Bolyai Chemia, Issue 61/2, 2016, Page(s) 249-260, ISSN 1224-7154

Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process

Author(s): Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad
Published in: REVISTA DE CHIMIE, Issue 69, 4, 2018, Page(s) 886-889, ISSN 0034-7752

About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants

Author(s): Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc, Mihaela Suciu
Published in: MATEC Web of Conferences, Issue 178, 2018, Page(s) 04007, ISSN 2261-236X
DOI: 10.1051/matecconf/201817804007

Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles

Author(s): Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister, Calin Ciprian Otel
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 01008, ISSN 2261-236X
DOI: 10.1051/matecconf/201713701008

Post-processing of customized implants made by laser beam melting from pure Titanium

Author(s): Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan
Published in: Journal of Optoelectronics and Advanced Materials, Issue Vol. 19, No. 11-12, 2017, Page(s) 738-747, ISSN 1454-4164

Determination of mechanical properties of carbon/epoxy plates by tensile stress test

Author(s): Paul Bere, Jolanta B. Krolczyk
Published in: E3S Web of Conferences, Issue 19, 2017, Page(s) 03018, ISSN 2267-1242
DOI: 10.1051/e3sconf/20171903018

Determination of the force required for the hydroforming of al 99,5

Author(s): Vasile Ceclan, Sorin Grozav
Published in: MATEC Web of Conferences, Issue 244, 2018, Page(s) 01003, ISSN 2261-236X
DOI: 10.1051/matecconf/201824401003

Direct manufacturing of customized implants from biometals, by 3D printing

Author(s): C. Cosma, N. Balc, P. Berce, A. Popan, A. Cosma, A. Burde
Published in: Academic Journal of Manufacturing Engineering, Issue Vol. 15, No. 4, 2017, Page(s) 42-49, ISSN 1583-7904

Effect of temperature on the mechanical properties of extrusion glass fiber reinforced polyamide 6.6 composites (GFRPA 6.6)

Author(s): Popescu, A., Hancu, L., Sabau, E
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Volume 61, No.2, 2018, Page(s) 213-218, ISSN 1221-5872

DYNAMIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Author(s): Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Published in: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Issue Vol. 60, Issue I, 2017, ISSN 1221-5872

Establishing the jacobian matrix for a three degrees of freedom serial structure

Author(s): Schonstein C., Panc N.
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Volume 61, No. 1, 2018, Page(s) 93-98, ISSN 1221-5872

EVALUATION OF BIODEGRADABLE LUBRICANTS BY FORWARD CONICAL CUP – BACKWARD STRAIGHT CUP EXTRUSION TEST

Author(s): Alexandru BUCUR, Gheorghe ACHIMAȘ, Lucian LĂZĂRESCU, Adrian TRIF, Grigore Marian POP
Published in: Academic Journal of Manufacturing Engineering, Issue Volume 15, Issue 3, 2017, Page(s) 43-48, ISSN 1583-7904

Evaluation of the turbocharger center housing flange influence onvibration measurements

Author(s): Becze S., Vuscan I., Jiang B., Panc N.
Published in: Academic Journal of Manufacturing Engineering, Issue Volume 16, Issue 2, 2018, Page(s) 114-119, ISSN 1583-7904

Hierarchical modeling of professional skills in the field of castings manufacture engineering

Author(s): V Samuilă, V F Soporan, G Conțiu, S Pădurețu, T R Lehene, M M Vescan
Published in: IOP Conference Series: Materials Science and Engineering, Issue 209, 2017, Page(s) 012095, ISSN 1757-8981
DOI: 10.1088/1757-899x/209/1/012095

Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials

Author(s): Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 01009, ISSN 2261-236X
DOI: 10.1051/matecconf/201713701009

Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer

Author(s): Paul Bere, Adrian Popescu, Cristian Dudescu, Liana Hancu
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 04006, ISSN 2261-236X
DOI: 10.1051/matecconf/201711204006

Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies

Author(s): Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 02010, ISSN 2261-236X
DOI: 10.1051/matecconf/201713702010

Influence of milling media on the structure and agglomeration behaviour of some hardmetal powder

Author(s): H. F. Chicinaş, D. O. Jucan, T. F. Marinca, B. V. Neamțu, G. Conțiu, P. Götze, A. Eckert, C. O. Popa
Published in: Powder Metallurgy, Issue 61/4, 2018, Page(s) 342-347, ISSN 0032-5899
DOI: 10.1080/00325899.2018.1476081

Experimental studies on manufacturing of the complex shapes made from copper

Author(s): Alina Ioana POPAN, Bogdan LUCA, Alexandru CAREAN
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 06005, ISSN 2261-236X
DOI: 10.1051/matecconf/201713706005

EXPERIMENTAL STUDY OF SURFACE ROUGHNESS IN THE CASE OF TURNING OF FREE-CUTTING STEEL AUT20 (22S20)

Author(s): Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Published in: Academic Journal of Manufacturing Engineering, Issue vol 15, issue 4, 2017, ISSN 1583-7904

Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles

Author(s): H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş
Published in: Advanced Powder Technology, Issue 29/8, 2018, Page(s) 1838-1847, ISSN 0921-8831
DOI: 10.1016/j.apt.2018.04.020

EXPERIMENTAL STUDY OF THE CUTTING RESULTANT FORCE FROM THE ALUMINIUM ALLOY TURNING PROCESS EN AW 6082

Author(s): Claudiu Mihai NEDEZKI, Adrian TRIF, Florin BUGNAR
Published in: Academic Journal of Manufacturing Engineering, Issue vol 14, issue 4, 2016, ISSN 1583-7904

Experimental study on manufacturing complex parts from composite materials using water jet cutting

Author(s): Popan Ioan Alexandru; Popan Alina Ioana
Published in: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Issue Vol. 60, Issue 2, 2017, Page(s) 251-254, ISSN 1221-5872

Experimental study on reverse engineering in case of composite materials cut by water jet cutting

Author(s): Ioan Alexandru Popan, Nicolae Balc, Alina Popan, Alexandru Carean
Published in: MATEC Web of Conferences, Issue 178, 2018, Page(s) 03004, ISSN 2261-236X
DOI: 10.1051/matecconf/201817803004

Geometrical modelling using matrix exponential functions for a serial robot structure

Author(s): Schonstein C.,Negrea I., Panc N.,
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol 60 (3), 2017, Page(s) 403-408, ISSN 1221-5872

EXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL

Author(s): Adrian TRIF and Claudiu Mihai NEDEZKI
Published in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Issue VOL. 16, ISSUE 4, 2018, ISSN 1583-7904

Finite element simulation of the C70 orthogonal cutting process

Author(s): Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conțiu, Marius Bozga
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 06011, ISSN 2261-236X
DOI: 10.1051/matecconf/201711206011

EXPERIMENTAL STUDY OF CUTTING PROCESSABILITY USING FACTORY METHODS

Author(s): Claudiu Mihai NEDEZKI and AdrianTRIF
Published in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Issue VOL. 16, ISSUE 3, 2018, ISSN 1583-7904

Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions

Author(s): Ioan Turcin, Selver Softic, Udo Traussnigg, Adrian Trif
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 01016, ISSN 2261-236X
DOI: 10.1051/matecconf/201713701016

Innovative mechanical structure for hospital bed folding using a single actuator

Author(s): Neamțu C., Popescu, S., Bere P., Comes, R.,
Published in: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering, Issue Vol. 59, 4, 2016, ISSN 1221-5872

INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718

Author(s): TOMOIAGĂ, Vlad-Bogdan; POPA, Marcel Sabin; CONȚIU, Glad; FAUR, Adrian Sorin; SATTEL, Stefan
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol 61, no 3, 2018, ISSN 1221-5872

Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle

Author(s): Nelu Pascalau, Ioan Vuscan, Nicolae Panc
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 03010, ISSN 2261-236X
DOI: 10.1051/matecconf/201713703010

Research on influence of gear honing process on involute helical gears quality

Author(s): Pascalau N., Vuscan I., Jiang B., Panc N
Published in: Academic Journal of Manufacturing Engineering, Issue Vol 16 no 2, 2018, Page(s) 114-119, ISSN 1583-7904

Low-cost industrial photogrammetry for rapid prototyping

Author(s): Vlad Bocanet, Marius Bulgaru, Vlad Pop
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 06001, ISSN 2261-236X
DOI: 10.1051/matecconf/201713706001

Research on Inner Surface of Tubes Hydroformed

Author(s): Vasile Ceclan, Sorin Grozav, Ivan Kuric
Published in: Advances in Science and Technology Research Journal, Issue 11/4, 2017, Page(s) 311-317, ISSN 2080-4075
DOI: 10.12913/22998624/80900

Proposal for a composite structure and graphic design for a parking barrier

Author(s): Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere, Simona Rodean
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 08004, ISSN 2261-236X
DOI: 10.1051/matecconf/201713708004

PARTICULARITIES OF THE TURNING PROCESS FOR THE TITANIUM ALLOY Ti6Al4V

Author(s): Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Published in: Academic Journal of Manufacturing Engineering, Issue vol 15, issue 2,, 2017, ISSN 1583-7904

Reamers cutting edge preparation for improvement the GGG 40 machining

Author(s): Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur, Bogdan Luca
Published in: MATEC Web of Conferences, Issue 178, 2018, Page(s) 01014, ISSN 2261-236X
DOI: 10.1051/matecconf/201817801014

Mechanical behavior of composite materials using the finite element analysis

Author(s): Emilia Sabau, Adrian Popescu, Cristian Vilau
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 08006, ISSN 2261-236X
DOI: 10.1051/matecconf/201713708006

Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting

Author(s): Ioan Alexandru Popan, Nicolae Bâlc, Alina Ioana Popan
Published in: MATEC Web of Conferences, Issue 121, 2017, Page(s) 02010, ISSN 2261-236X
DOI: 10.1051/matecconf/201712102010

RESEARCH REGARDING A REDUCED CONTACT BETWEEN THE FLANKS SURFACE AND THE MATERIAL DURING TAPPING IN ORDER TO INCREASE MACHINING PRODUCTIVITY

Author(s): Faur, Adrian Sorin; Popa, Marcel Sabin; Contiu, Glad; Tomoiaga, Vlad; Luca, Bogdan Cornel
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol 61 No 3, 2018, ISSN 1221-5872

Kinematical modelling for R2T serial structure used in transfer parts between two workstations

Author(s): Schonstein C., Panc N.
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol 60, No 3, 2017, Page(s) 409-416, ISSN 1221-5872

The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation

Author(s): Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă, Vasile Ceclan
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 05002, ISSN 2261-236X
DOI: 10.1051/matecconf/201713705002

Theoretical analysis and practical case studies of powder-based additive manufacturing

Author(s): Cosmin COSMA, Catalin MOLDOVAN, Ian CAMPBELL, Andrei COSMA, Nicolae BALC
Published in: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Issue Vol. 61, Issue 3, 2018, Page(s) 369-378, ISSN 1221-5872

The influence of silicon rubber aging on parts obtained in flexible molds

Author(s): Nicolae PANC, Alina POPAN, Adrian Sever RADU, Adrian POPESCU
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol. 61, Issue 3, 2018, Page(s) 363-368, ISSN 1221-5872

The design of a plastic injection mold for the part “Tensile Test Specimen”

Author(s): Morar, C., Popescu, A
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Volume 60, No.2, 2017, Page(s) 319-324, ISSN 1221-5872

Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection

Author(s): Alexandru Rus, Vasile-Dănuţ Leordean, Petru Berce
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 07007, ISSN 2261-236X
DOI: 10.1051/matecconf/201713707007

The influence of hole finishing strategies on quality

Author(s): Vlad Bocanet, Nicolae Panc
Published in: MATEC Web of Conferences, Issue 137, 2017, Page(s) 03001, ISSN 2261-236X
DOI: 10.1051/matecconf/201713703001

THE GRAPHICAL SIMULATION OF TRR SMALL-SIZED ROBOT

Author(s): Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol. 59, Issue 3, 2016, ISSN 1221-5872

STUDIES ON THE CUTTING FORCES IN CASE OF STAINLESS STEEL TURNING OPERATION

Author(s): Adrian TRIF
Published in: Academic Journal of Manufacturing Engineering, Issue VOL. 16, ISSUE 2, 2018, ISSN 1583-7904

THE KINEMATIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Author(s): Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Published in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Issue vol 14, issue 4,, 2016, ISSN 1583-7904

The influence of accuracy in establishing the origin of the part on the machining accuracy

Author(s): Panc N., Schonstein C., Vuscan I.
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol 60 No3, 2017, Page(s) 393-398, ISSN 1221-5872

Studies on designing and testing of a customized medical implant for the maxillofacial area

Author(s): L. Jozsa, D. Leordean, C. Vilau
Published in: Academic Journal of Manufacturing Engineering, Issue Vol 15 No1, 2017, ISSN 1583-7904

Utilisation of composite materials in the model aircraft construction

Author(s): George Arghir, BERE Paul
Published in: Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, and Engineering,, Issue Vol 60 Nr. 1,, 2017, ISSN 1221-5872

The mechanical characteristics of composite materials used for the rehabilitation of canals by means of lining

Author(s): Mocean F, ACHIMAŞ G, BERE P, ACHIMAŞ S.,
Published in: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering,, Issue Vol. 58, No. 1,, 2016, ISSN 1221-5872

THE PATH PLANNING OF TRR SMALL-SIZED ROBOT

Author(s): Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Published in: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Issue Vol. 59, Issue 3, 2016, ISSN 1221-5872

The influence of build orientation on the mechanical properties of medical implants made from PA 2200 by Selective Laser Sintering

Author(s): Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 03009, ISSN 2261-236X
DOI: 10.1051/matecconf/201711203009

Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method

Author(s): Razvan Pacurar, Ancuta Pacurar, Serban Pop
Published in: MATEC Web of Conferences, Issue 178, 2018, Page(s) 02009, ISSN 2261-236X
DOI: 10.1051/matecconf/201817802009

Theoretical Analysis And Practical Case Studies of SLA, Polyjet and FDM Manufacturing Techniques

Author(s): C. Moldovan, C. Cosma, P. Berce, N. Balc
Published in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Issue Vol. 61, No 3,, 2018, ISSN 1221-5872

"Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part ""Body of Spark Plug"""

Author(s): Călin Ciprian Otel, Razvan Păcurar, Daniel Filip, Monica Steopan, Paul Frîncu
Published in: Applied Mechanics and Materials, Issue 859, 2016, Page(s) 163-169, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/amm.859.163

Microstructural Analysis of the Interface Between Some Superalloys and Composite/Ceramic Materials

Author(s): Burde A.V., Cuc S., Radu A., Rusu M.A., Cosma C.S., Câmpian R.S., Leordean D.
Published in: Studia Universitatis Babes-Bolyai, Studia Chemia, Issue LXI, Issue 2, 2016, Page(s) 205-2014, ISSN 1224-7154

PA 2200 vs. PMMA: Comparison Between the Mechanical Proprieties Obtained for the 2 Biocompatible Materials

Author(s): Miron Borzan C. S., Dudescu M.C., Ceclan V., Trif A., Ridzon M., Berce P.,
Published in: MATERIALE PLASTICE, Issue Vol. 53, no. 1, 2016, Page(s) 1-5, ISSN 0025-5289

Influence of Ti-Ceramic or Ti-Composite crown on stress distribution: finite element study and additive manufacturing

Author(s): Ispas, A., Cosma, C., Crăciun, A., Constantiniuc, M., Lascu, L., Leordean, D., Vilău, C.
Published in: Journal of Optoelectronics and Advanced Materials, Issue Vol 18 Issue 9-10, 2016, Page(s) 904-912, ISSN 1454-4164

Additive manufacturing – a sustainable manufacturing route

Author(s): Domniţa Frăţilă, Horaţiu Rotaru
Published in: MATEC Web of Conferences, Issue 94, 2017, Page(s) 03004, ISSN 2261-236X
DOI: 10.1051/matecconf/20179403004

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

Author(s): Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Published in: MATEC Web of Conferences, Issue 94, 2017, Page(s) 03008, ISSN 2261-236X
DOI: 10.1051/matecconf/20179403008

Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel

Author(s): Domnita Fratila
Published in: Materials and Manufacturing Processes, Issue 31/5, 2015, Page(s) 657-666, ISSN 1042-6914
DOI: 10.1080/10426914.2015.1004708

Basic Research on Lattice Structures Focused on the Strut Shape and Welding Beads

Author(s): Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Published in: Physics Procedia, Issue 83, 2016, Page(s) 833-838, ISSN 1875-3892
DOI: 10.1016/j.phpro.2016.08.086

Research on the mechanical behaviour of an airplane component made by selective laser melting technology

Author(s): Răzvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc
Published in: MATEC Web of Conferences, Issue 94, 2017, Page(s) 03012, ISSN 2261-236X
DOI: 10.1051/matecconf/20179403012

Research of Environment-Friendly Techniques Influence on the Accuracy of Gear Processing in the Context of Sustainable Machining

Author(s): Frăţilă Domnita
Published in: Proceedings of Romanian Academy, Issue Series A. Volume 14, Number 1, 2013, Page(s) 56 - 63, ISSN 1454-9069

Selective laser melting of Ti6Al7Nb with hydroxyapatite addition

Author(s): Teodora Marcu, Cinzia Menapace, Luca Girardini, Dan Leordean, Catalin Popa
Published in: Rapid Prototyping Journal, Issue 20/4, 2014, Page(s) 301-310, ISSN 1355-2546
DOI: 10.1108/RPJ-09-2012-0083

Experimental and Theoretic Research Regarding Extrusion Optimization for Reinforced Polyamide (PA 6.6 – 10 % GF)

Author(s): Adrian Popescu, Liana Livia Hancu, Paul Bere, Cristina Ștefana Miron-Borzan
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 125-130, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.125

Evaluation of Overall Efficiency of Devices with Worm Gear

Author(s): Alexandru Micaciu, Ioan Vuşcan, Nicolae Panc
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 9-14, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.9

Research on Abrasive Water Jet Milling of the Planar Surfaces, Slots and Profiles

Author(s): Alexandru Popan, Nicolae Balc, Alexandru Carean, Alina Luca, Alin Miron
Published in: Applied Mechanics and Materials, Issue 760, 2015, Page(s) 409-414, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.760.409

In vivo behavior of surface modified Ti6Al7Nb alloys used in selective laser melting for custom-made implants. A preliminary study

Author(s): Rotaru, H., Armencea, G., Spîrchez, D., Berce, C., Marcu, T., Leordean, D., Kim, S.-G., Bǎciuţ, M.
Published in: ROMANIAN JOURNAL OF MORPHOLOGY AND EMBRYOLOGY, Issue Vol. 54 - Issue 3, 2013, Page(s) 791-796, ISSN 1220-0522

Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending

Author(s): Lucian Lăzărescu
Published in: The International Journal of Advanced Manufacturing Technology, Issue 64/1-4, 2013, Page(s) 85-91, ISSN 0268-3768
DOI: 10.1007/s00170-012-3992-8

Research on How Lens Position of the Optical System is Influencing the Mechanical Characteristics of the Metallic Parts Made by Selective Laser Melting Equipment

Author(s): Razvan Pacurar, Petru Berce
Published in: Advanced Engineering Forum, Issue 8-9, 2013, Page(s) 285-292, ISSN 2234-991X
DOI: 10.4028/www.scientific.net/AEF.8-9.285

DETERMINATION OF MATERIAL PARAMETERS OF SHEET METALS USING THE HYDRAULIC BULGE TEST

Author(s): Lucian Lăzărescu, Ioan Nicodim, Ioan Ciobanu, Dan Sorin Comşa, Dorel Banabic
Published in: Acta Metallurgica Slovaca, Issue 19/1, 2013, ISSN 1335-1532
DOI: 10.12776/ams.v19i1.81

The Analyses of Working Parameters for a 3D Complex Part Manufacturing by CNC Machine

Author(s): Vasile Adrian Ceclan, Ioan Alexandru Popan, Sorin Dumitru Grozav, Cristina Ștefana Miron-Borzan, Ivan Kuric
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 286-291, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.286

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE SPRINGBACK ANGLE OF HIGH-STRENGTH STEELS

Author(s): Jan Slota, Miroslav Jurcisin, Lucian Lazarescu
Published in: Acta Metallurgica Slovaca, Issue 20/2, 2014, ISSN 1335-1532
DOI: 10.12776/ams.v20i2.287

Effect of the Blank-Holding Load on the Drawing Force in the Deep-Drawing Process of Cylindrical and Square Cups

Author(s): Lucian Lazarescu, Ioan Nicodim, Dan Sorin Comsa, Dorel Banabic
Published in: Applied Mechanics and Materials, Issue 760, 2015, Page(s) 379-384, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.760.379

Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes

Author(s): Lucian Lăzărescu, Ioan Ciobanu, Ioan Pavel Nicodim, Dan Sorin Comşa, Dorel Banabic
Published in: Key Engineering Materials, Issue 554-557, 2013, Page(s) 204-209, ISSN 1662-9795
DOI: 10.4028/www.scientific.net/KEM.554-557.204

Research on Improving the Outer Surface Quality of the Parts Made by SLM

Author(s): Nicolae Bâlc, Sorin Cosmin Cosma, Julia Kessler, Voicu Mager
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 199-204, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.199

Studies Regarding Redesign and Optimization of the Main Shaft of a Naval Winch

Author(s): Adina Sarca, Dan Leordean, Cristian Vilău
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 271-279, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.271

Methodology for evaluate the form deviations for formula one nose car


Published in: ISSN 2391-5439
DOI: 10.2478/s13531-013-0158-x

Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling

Author(s): Vasile Adrian Ceclan, Paul Bere, Marian Borzan, Sorin Grozav, Cristina Borzan
Published in: Revista de MATERIALE PLASTICE, Issue Vol. 50, no 2, 2013, Page(s) 79 - 83, ISSN 0025-5289

The Geometry Equations for Multiple Kinematic Structures Using Direct Geometry

Author(s): Calin Beldean, Ioan Vuşcan, Kalman Kacso, Nicolae Panc
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 292-297, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.292

Device for Training of Machine Tool Diagnostic Routines under Various Conditions

Author(s): Miroslav Císar, Ivan Kuric, Vasile Adrian Ceclan
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 3-8, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.3

Experimental Research Regarding the Tensile Strength of some Reinforced Composite Materials

Author(s): Paul Bere, Adrian Popescu, Liana Livia Hancu
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 131-136, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.131

Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems

Author(s): Adrian Coman, Andreas Gebhardt, Carol Patalita, Dănuţ Vasile Leordean
Published in: Applied Mechanics and Materials, Issue 371, 2013, Page(s) 250-254, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.371.250

CNC Machining Of The Complex Copper Electrodes

Author(s): Ioan Alexandru Popan, Nicolae Balc, Alina Popan
Published in: ACTA Universitatis Cibiniensis, Issue 66/1, 2015, Page(s) 153-158, ISSN 1583-7149
DOI: 10.1515/aucts-2015-0045

Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM

Author(s): Dan Leordean, S. A. Radu, D. Frățilă, P. Berce
Published in: The International Journal of Advanced Manufacturing Technology, Issue 79/5-8, 2015, Page(s) 905-920, ISSN 0268-3768
DOI: 10.1007/s00170-015-6873-0

The Accuracy of the Plastic Parts Milling Process Executed by a Six Axes Robot

Author(s): Alexandru Popan, Nicolae Bâlc, Bogdan Luca, Alina Popan, Alexandru Carean
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 339-344, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.339

Kinematic Process Plastic Cold Orbital Forming

Author(s): Sorin Dumitru Grozav, Vasile Adrian Ceclan, Antoniu Turcu, Ovidiu Vasile Oprea
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 98-103, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.98

Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging

Author(s): Lucian Lăzărescu, Dorel Banabic
Published in: Advanced Engineering Forum, Issue 8-9, 2013, Page(s) 251-258, ISSN 2234-991X
DOI: 10.4028/www.scientific.net/AEF.8-9.251

Electrochemical and structural investigation on Ti6Al7Nb alloy, coated with hydroxyapatite and titanium dioxide

Author(s): Viorica Saplontai, Monica Saplontai, Ioan Roman, Dan Leordean, Roxana Trusca, Tamas Robert Toth, Ileana Cojocaru, Nicolae Balc, Marioara Moldovan
Published in: CHEMISTRY MAGAZINE, Issue Volume: 65, Issue: 10, 2014, Page(s) 1249-1252, ISSN 0034-7752

Research Concerning Chalk‘s Influence on Composite-Based Melamine's Compressive Strength

Author(s): Liana Livia Hancu, Horatiu Iancau, Paul Bere, Adrian Popescu
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 149-154, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.149

Design and Analyses to Determine the Minimum Acting Force of a Gripper for Handling the Parts with Robots

Author(s): Cristian Vilău, Nicolae Bâlc, Dan Leordean
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 264-270, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.264

Researches Regarding the Influence of Cutting Regime on Processed Surface in Aluminum Alloys Turning Process

Author(s): Adrian Trif, Marian Borzan, Alexandru Popan, Domniţa Fraţilă, Adriana Rus, Claudiu Nedezki
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 15-20, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.15

Design and Analysis of Carbon/Epoxy Composite Tubular Parts

Author(s): Paul Bere, Ovidiu Nemes, Cristian Dudescu, Petru Berce, Emilia Sabau
Published in: Advanced Engineering Forum, Issue 8-9, 2013, Page(s) 207-214, ISSN 2234-991X
DOI: 10.4028/www.scientific.net/AEF.8-9.207

Quality of the Hydroformed Tubular Parts

Author(s): Vasile Adrian Ceclan, Nicolae Balc, Sorin Grozav, Paul Bere, Cristina Stefana Borzan
Published in: Advanced Engineering Forum, Issue 8-9, 2013, Page(s) 215-224, ISSN 2234-991X
DOI: 10.4028/www.scientific.net/AEF.8-9.215

Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment

Author(s): Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu, Khalid Abd Elghany, Vasile Ceclan, Petru Berce
Published in: Revista de MATERIALE PLASTICE, Issue Vol 52, no. 1,, 2015, Page(s) 39 -42, ISSN 0025-5289

Methods for Checking the Symmetry of the Formula One Car Nose

Author(s): Călin Neamțu, Paul Bere
Published in: Applied Mechanics and Materials, Issue 657, 2014, Page(s) 785-789, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.657.785

Development of a new procedure for the experimental determination of the Forming Limit Curves

Author(s): D. Banabic, L. Lazarescu, L. Paraianu, I. Ciobanu, I. Nicodim, D.S. Comsa
Published in: CIRP Annals - Manufacturing Technology, Issue 62/1, 2013, Page(s) 255-258, ISSN 0007-8506
DOI: 10.1016/j.cirp.2013.03.051

Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology

Author(s): Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak, Nicolae Bâlc
Published in: Applied Mechanics and Materials, Issue 657, 2014, Page(s) 231-235, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.657.231

Mold Design for Polystyrene Plastic Anchor

Author(s): Calin Neamtu, Paul Bere, Corina Dobocan, Rares Ghinea, Sergiu Solcan
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 143-148, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.143

Predictive Performances of FLC Using Marciniak-Kuczynski Model and Modified Maximum Force Criterion

Author(s): Dorel Banabic, Lucian Lazarescu, Dan Sorin Comsa
Published in: Key Engineering Materials, Issue 651-653, 2015, Page(s) 96-101, ISSN 1662-9795
DOI: 10.4028/www.scientific.net/KEM.651-653.96

Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations

Author(s): Marko Vrh, Miroslav Halilovič, Bojan Starman, Boris Štok, Dan-Sorin Comsa, Dorel Banabic
Published in: European Journal of Mechanics - A/Solids, Issue 45, 2014, Page(s) 59-74, ISSN 0997-7538
DOI: 10.1016/j.euromechsol.2013.11.013

An evolving plane stress yield criterion based on crystal plasticity virtual experiments

Author(s): Jerzy Gawad, Dorel Banabic, Albert Van Bael, Dan Sorin Comsa, Mihai Gologanu, Philip Eyckens, Paul Van Houtte, Dirk Roose
Published in: International Journal of Plasticity, Issue 75, 2015, Page(s) 141-169, ISSN 0749-6419
DOI: 10.1016/j.ijplas.2015.02.011

Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting

Author(s): Voicu Mager, Nicolae Bâlc, Dan Leordean, Cristian Dudescu, Mathias Fockele
Published in: Applied Mechanics and Materials, Issue 371, 2013, Page(s) 280-284, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.371.280

Dental follicle stem cells in bone regeneration on titanium implants

Author(s): Ondine Lucaciu, Olga Soriţău, Dan Gheban, Dan Rus Ciuca, Oana Virtic, Adriana Vulpoi, Noemi Dirzu, Radu Câmpian, Grigore Băciuţ, Catalin Popa, Simion Simon, Petru Berce, Mihaela Băciuţ, Bogdan Crisan
Published in: BMC Biotechnology, Issue 15/1, 2015, ISSN 1472-6750
DOI: 10.1186/s12896-015-0229-6

Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method

Author(s): Razvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc, Anna Petrilak, Ladislav Morovič
Published in: Applied Mechanics and Materials, Issue 371, 2013, Page(s) 478-482, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.371.478

Customized implants with specific properties, made by selective laser melting

Author(s): Dan Leordean, Cristian Dudescu, Teodora Marcu, Petru Berce, Nicolae Balc
Published in: Rapid Prototyping Journal, Issue 21/1, 2015, Page(s) 98-104, ISSN 1355-2546
DOI: 10.1108/RPJ-11-2012-0107

Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide

Author(s): Adrian Popescu, Liana Hancu, Paul Bere
Published in: Applied Mechanics and Materials, Issue 371, 2013, Page(s) 394-398, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.371.394

Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes

Author(s): Adrian Coman, Simona Rodean, Dănuţ Vasile Leordean, Carol Patalita
Published in: Applied Mechanics and Materials, Issue 371, 2013, Page(s) 188-192, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.371.188

Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology

Author(s): Razvan Păcurar, Ancuţa Păcurar
Published in: Applied Mechanics and Materials, Issue 657, 2014, Page(s) 236-240, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.657.236

Basic Research on Lattice Structures Focused on the Tensile Strength

Author(s): Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 193-198, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.193

Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding

Author(s): Lucian Lazarescu, Ioan Nicodim, Dorel Banabic
Published in: Key Engineering Materials, Issue 639, 2015, Page(s) 33-40, ISSN 1662-9795
DOI: 10.4028/www.scientific.net/KEM.639.33

Surface Roughness Prediction During Dry Turning of Austenitic Stainless Steel AISI 304

Author(s): Ioan Alexandru Popan, Nicolae Bâlc, Alina Popan, Domniţa Fraţilă, Adrian Trif
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 54-59, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.54

Using Simulation to Improve the Quality of the Metallic Industrial Components Made by Rapid Casting

Author(s): Alina Popan, Nicolae Bâlc, Alexandru Popan, Nicolae Panc, Cristina Stefana Borzan
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 187-192, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.187

How the Crystallization Process in Metal Casting is Influenced by the Mold Filling and Cooling Methods<sup></sup>

Author(s): Nicolae Panc, Nicolae Bâlc, Alina Popan
Published in: Applied Mechanics and Materials, Issue 808, 2015, Page(s) 92-97, ISSN 1662-7482
DOI: 10.4028/www.scientific.net/AMM.808.92

Research on the durability of injection molding tools made by selective laser sintering technology

Author(s): R. Păcurar, P. Berce
Published in: Proceedings of the Romanian Academy, Issue Vol. 14, no. 3, 2013, Page(s) 234-241, ISSN 1220-5737

Design and Analysis of Carbon/epoxy Composite Bicycle Handlebar

Author(s): Bere P., Dudescu M. C., Balc N. , Berce P., Nemes O., Iurian A. M.
Published in: Revista de MATERIALE PLASTICE, Issue Vol. 51, No. 2, 2014, Page(s) 145-149, ISSN 0025-5289

Resin type influence on moulded parts final dimensions

Author(s): Radu, S.A., Leordean, D., Bâlc, N., Nemeș. O.
Published in: Studia Universitatis Babes-Bolyai, Chemia, Issue Vol. 60 Issue 2, 2015, Page(s) 219-228, ISSN 1224-7154

Maintaining availability through predictive maintenance actions through vibration profile analysis

Author(s): Panc N., Kerekes G.
Published in: Academic Journal of Manufacturing Engineering, Issue Volume 13, Issue 4, 2015, Page(s) 22-25, ISSN 1583-7904

Comparative Analysis of Surface Finishing for Different Cutting Strategies of Parts Made from POM C

Author(s): Nicolae Panc, Glad Contiu, Vlad Bocanet
Published in: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Page(s) 324-332
DOI: 10.1007/978-3-319-99353-9_35

Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions

Author(s): Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc, Alina Ioan Popan
Published in: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Page(s) 105-113
DOI: 10.1007/978-3-319-99353-9_12

Recycling of Polymeric Composite Materials

Author(s): Emilia Sabău
Published in: Product Lifecycle Management - Terminology and Applications, 2018
DOI: 10.5772/intechopen.81281

Applications of the Selective Laser Melting Technology in the Industrial and Medical Fields

Author(s): Razvan Pacurar, Ancut Pacurar
Published in: New Trends in 3D Printing, 2016
DOI: 10.5772/63038

Chapter 3 “Surface Treatments Applied on Titanium Implants”, Advanced Industrial Engineering - New tendencies in material engineering

Author(s): C. Cosma, N. Balc, M. Moldovan, P. Berce
Published in: 2017, Page(s) 65-84

Cap. 4 Advanced composite materials and applications

Author(s): Paul BERE
Published in: 2017, Page(s) 34

Chapter 2 “Medical Applications of Macro-Porous Structures Additive Manufactured”, Advanced Industrial Engineering - New tendencies in material engineering

Author(s): C. Cosma, N. Balc, M. Moldovan, P. Berce
Published in: 2017, Page(s) 47-64

Cap. 1 Composite Materials

Author(s): Paul BERE
Published in: 2017, Page(s) 38

Sustainable Manufacturing Through Environmentally-Friendly Machining

Author(s): Domnita Fratila
Published in: Green Manufacturing Processes and Systems, 2013, Page(s) 1-21
DOI: 10.1007/978-3-642-33792-5_1

An Innovative Procedure for the Experimental Determination of the Forming Limit Curves

Author(s): Dorel Banabic, Lucian Lazarescu, Dan-Sorin Comsa
Published in: 60 Excellent Inventions in Metal Forming, 2015, Page(s) 11-16
DOI: 10.1007/978-3-662-46312-3_2

BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes

Author(s): Dorel Banabic, Dan-Sorin Comsa
Published in: 60 Excellent Inventions in Metal Forming, 2015, Page(s) 49-54
DOI: 10.1007/978-3-662-46312-3_8

Environmentally friendly Manufacturing Processes in the Context of Transition to Sustainable Production

Author(s): D. Fratila
Published in: Comprehensive Materials Processing, 2014, Page(s) 163-175
DOI: 10.1016/B978-0-08-096532-1.00815-3

Analysis on the abrasive water-jet milling process on titanium alloys

Author(s): Popan I.A., Balc N., Popan, A.I., Carean, A., Ceclan, V.A.
Published in: International Conference on Production Research - Africa, Europe and the Middle East (ICPR-AEM) / 4th International Conference on Quality and Innovation in Engineering and Management (QIEM), 2016

Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties

Author(s): M. Pustan, C. Birleanu, A. Trif, S. Garabagiu, D. Marconi, L. Barbu-Tudoran
Published in: 2018 International Semiconductor Conference (CAS), 2018, Page(s) 83-86
DOI: 10.1109/smicnd.2018.8539738

Study on manufacturing implants of biocomposite materials by water jet cutting

Author(s): Ioan Alexandru Popan, Nicolae Balc and Alina Ioana Popan
Published in: Proceedings of 7th International Conference on Additive Technologies – ICAT, 2018, Page(s) 48-50

Design for Additive Manufacturing a Sweat Gland Simulator

Author(s): Turcin, C. Cosma, A. Abdallah, N. Balc
Published in: 7th International Conference on Additive Technologies, 2018

The Mechanism of Deformation Process in Case of Orbital Deformation

Author(s): Grozav S.D., Ceclan V.A., Kuric I.
Published in: International Conference on Quality and Innovation in Engineering and Management, 2016, Page(s) 489-493

Assessing The Value Of 3D Printed Personalised Products

Author(s): Abdul Kudus, SI, Campbell, RI, Bibb, R
Published in: MCP-CE, 2016

Using acetone (propanone) as a post-production finishing technique: Crossing the divide between art and technology

Author(s): Havenga, SP, De Beer, DJ, Van Tonder, PJM, Campbell, RI
Published in: Conference Papers and Presentations (Design School), 2016, Page(s) 430-442

Arousing Enthusiasm for STEM: Teaching 3D Printing Technology

Author(s): A. Gebhardt, L. Thurn
Published in: Conference Proceedings. New Perspectives in Science Education, Issue 6th Edition, 2017, Page(s) 87-92

Analysis on the Abrasive Water-Jet Milling Process on Titanium Alloys

Author(s): A. Popan, N. Bâlc, A. I. Popan, A. Cărean, V. A. Ceclan
Published in: International Conference on Quality and Innovation in Engineering and Management, 2016

Design and manufacturing methodology for F1 nose car

Author(s): Bere Paul, Neamtu Calin
Published in: International Conference on Production Research - Regional Conference Africa, 2014, Page(s) 21-26

Improving the design of a wind turbine blade

Author(s): Ghinea, R., Bere, P., Neamtu, C.
Published in: International Conference on Production Research - Regional Conference Africa, 2014, Page(s) 221-226

DEVELOPMENT AND TESTING OF MINERAL CASTING FOR USE IN STRUCTURAL ELEMENTS AND MOLD MAKING

Author(s): Mihai CIUPAN, Marcel POPA, Ioan Pavel ŞOŞA, Glad CONŢIU, Emilia CIUPAN
Published in: ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2018, ISSN 1221-5872

Fabricaţia pieselor din materiale compozite prin procedeul de transfer in matriţă,

Author(s): Claudiu Florea, Paul Bere
Published in: 2017, Page(s) 256

Proiectarea Produselor - Aplicații

Author(s): D. Leordean
Published in: 2018, Page(s) 117 pagini

Aplicatiile medicale ale tehnologiilor de fabricatie prin adaugare de material

Author(s): Berce P, Balc N, Chezan H, Leordean D, Mager V, Borzan C, Berce C
Published in: Editura Academiei Romane, Issue Premiul Academiei Române, Premiul 'Henri Coandă, Ceremonie de decernare: 15 decembrie 2017, 2017

Fabricaţia materialelor compozite. Materiale, Metode, Aplicaţii

Author(s): Paul BERE, Marin GUŢU
Published in: Editura Tehnică UTM, 2018, Page(s) 328

ADVANCED INDUSTRIAL ENGINEERING, NEW TENDENCIES IN MATERIAL ENGINEERING

Author(s): Bere Paul
Published in: 2017

Tehnologii neconvenţionale şi de prototipare rapidă

Author(s): N. Bâlc, R. Păcurar
Published in: 2016, Page(s) 70

Modern Technologies in Manufacturing

Author(s): Balc Nicolae
Published in: Applied Mechanics and Materials, Issue Vol. 808, 2015, Page(s) 394

Tehnologii de fabricaţie prin adaugare de material şi aplicaţiile lor

Author(s): Berce Petru, Bâlc Nicolae, Păcurar Razvan
Published in: 2014, Page(s) 387

Fabricaţia pieselor metalice prin topire selectivă cu laser, cu aplicabilitate în domeniul industrial

Author(s): Păcurar Razvan
Published in: 2015, Page(s) 250

Proiectarea dispozitivelor-Îndrumător de laborator

Author(s): Panc Nicolae, Vușcan Ioan, Păunescu Daniela, Gligor Gheorghe
Published in: 2014, Page(s) 128

Fabricaţia implanturilor medicale personalizate prin topire selectivă cu laser – studiu de caz

Author(s): R., Păcurar, A. Petrilak
Published in: 2015, Page(s) 120

The efficiency of the technologies for low volume production of the dental implants

Author(s): Marișca Viorica Saplonțai
Published in: PhD. Coordinator: Nicolae Balc, 2014

Materials and methods used for the filters to fix the heavy metals

Author(s): Monica Saplonțai
Published in: PhD. Coordinator: Nicolae Balc, 2014

Research on selective laser melting manufacturing of the medical implants with composite structures basis

Author(s): Voicu Mager
Published in: PhD. Coordinator: Nicolae Balc, 2014

Research on developing the water jet cutting process for composite materials machining

Author(s): Alin Vasile Miron
Published in: PhD. Coordinator: Nicolae Balc, 2015

Research on improving the manufacturing process of the medical implants made by SLM from titanium powder

Author(s): Sorin Cosmin Cosma
Published in: PhD. Coordinator: Nicolae Balc, 2015

Theoretical and experimental research on using the RP models to manufacture maxilla-facial implants

Author(s): Flaviu Horea Chezan
Published in: PhD. Coordinator: Petru Berce, 2014