Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca

Rezultaty

1-2 newsletters will be produced per year during project Period 1.

Support materials to support the promotion of the project consisting in a leaflet (2 pages, A4 size) and a project poster (A1 size)

Project website

The project website will contain the following sections: home, project summary, partners profiles, news and events and project downloads (including the promotional materials, project newsletters and public deliverables). The project website will be implemented in English and Romanian.

Promotion guide about TUCN

Brochure promoting the S&T excellence of TUCN in the field of additive manufacturing. The document will consist in 30+ pages describing TUCN's RDI activities, research capacities, previous national and international projects, list of publications, research interests for further cooperation and significant achievements.

Project Newsletters -Period 2

1-2 newsletters will be produced per year during project Period 2.

One page statement that Task 4.3 has been completed

List of all publications (in the particular field of research) of the coordinator during the 3 years preceding the start date of the project.

Publikacje

Design for Additive Manufacturing, to produce assembled products, by SLS

Autorzy: Nicolae Bâlc, Cristian Vilău
Opublikowane w: MATEC Web of Conferences, Numer 121, 2017, Strona(/y) 04002, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201712104002

Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide

Autorzy: Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 08005, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713708005

Carbon epoxy front hood for an electrical city vehicle

Autorzy: Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes, Sergiu Solcan
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 08001, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713708001

ANALYSIS DISTRIBUTION OF THE EQUIVALENT PLASTIC STRAIN, CONTACT PRESSURE AND TEMPERATURE DURING THE METAL TUBES EXTRUSION

Autorzy: Petru Paul DINCU, Gheorghe ACHIMAȘ, Adriana NEAG and Adrian TRIF
Opublikowane w: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numer VOL.16, ISSUE 1, 2018, ISSN 1583-7904
Wydawca: Editura Politehnica

ANALYSIS OF CUTTING FORCES AT DRY AND NEAR-DRY TURNING OF AISI 316L STAINLESS STEEL

Autorzy: Domnița FRĂȚILĂ, Adrian TRIF and Alexandru POPAN
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer VOL. 16, ISSUE 4, 2018, Strona(/y) 19-26, ISSN 1583-7904
Wydawca: Editura Politehnica

Design and manufacturing front hood for electric vehicle by carbon fibber

Autorzy: Paul Bere, Calin Neamtu, Cristian Dudescu
Opublikowane w: MATEC Web of Conferences, Numer 112, 2017, Strona(/y) 07021, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201711207021

Calculation of the contact surface in the orbital deformation of the cylindrical workpiece

Autorzy: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca
Opublikowane w: Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering, Numer vol 61 no 4, 2018, Strona(/y) 695-700, ISSN 1221-5872
Wydawca: UTCN

Analysis and optimization of cutting parameters in drilling operation of EM AW2007 aluminum alloy

Autorzy: Frăţilă, D., Popan, A
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Vol.16 No1, 2018, Strona(/y) 19-26, ISSN 1583-7904
Wydawca: Editura Politehnica

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3

Autorzy: Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma, Alexandru Carean
Opublikowane w: MATEC Web of Conferences, Numer 94, 2017, Strona(/y) 02011, ISSN 2261-236X
Wydawca: MATEC
DOI: 10.1051/matecconf/20179402011

Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction

Autorzy: Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P
Opublikowane w: Studia Universitatis Babes-Bolyai Chemia, Numer 61/2, 2016, Strona(/y) 249-260, ISSN 1224-7154
Wydawca: Universitatea Babes-Bolyai

Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process

Autorzy: Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad
Opublikowane w: REVISTA DE CHIMIE, Numer 69, 4, 2018, Strona(/y) 886-889, ISSN 0034-7752
Wydawca: Syscom 18 s.r.l.

About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants

Autorzy: Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc, Mihaela Suciu
Opublikowane w: MATEC Web of Conferences, Numer 178, 2018, Strona(/y) 04007, ISSN 2261-236X
Wydawca: Matec
DOI: 10.1051/matecconf/201817804007

Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles

Autorzy: Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister, Calin Ciprian Otel
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 01008, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713701008

Post-processing of customized implants made by laser beam melting from pure Titanium

Autorzy: Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan
Opublikowane w: Journal of Optoelectronics and Advanced Materials, Numer Vol. 19, No. 11-12, 2017, Strona(/y) 738-747, ISSN 1454-4164
Wydawca: National Institute of Research and Development for Optoelectronics

Determination of mechanical properties of carbon/epoxy plates by tensile stress test

Autorzy: Paul Bere, Jolanta B. Krolczyk
Opublikowane w: E3S Web of Conferences, Numer 19, 2017, Strona(/y) 03018, ISSN 2267-1242
Wydawca: EDP Sciences
DOI: 10.1051/e3sconf/20171903018

Determination of the force required for the hydroforming of al 99,5

Autorzy: Vasile Ceclan, Sorin Grozav
Opublikowane w: MATEC Web of Conferences, Numer 244, 2018, Strona(/y) 01003, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201824401003

Direct manufacturing of customized implants from biometals, by 3D printing

Autorzy: C. Cosma, N. Balc, P. Berce, A. Popan, A. Cosma, A. Burde
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Vol. 15, No. 4, 2017, Strona(/y) 42-49, ISSN 1583-7904
Wydawca: Editura Politehnica

Effect of temperature on the mechanical properties of extrusion glass fiber reinforced polyamide 6.6 composites (GFRPA 6.6)

Autorzy: Popescu, A., Hancu, L., Sabau, E
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Volume 61, No.2, 2018, Strona(/y) 213-218, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

DYNAMIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Autorzy: Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Opublikowane w: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numer Vol. 60, Numer I, 2017, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

Establishing the jacobian matrix for a three degrees of freedom serial structure

Autorzy: Schonstein C., Panc N.
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Volume 61, No. 1, 2018, Strona(/y) 93-98, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

EVALUATION OF BIODEGRADABLE LUBRICANTS BY FORWARD CONICAL CUP – BACKWARD STRAIGHT CUP EXTRUSION TEST

Autorzy: Alexandru BUCUR, Gheorghe ACHIMAȘ, Lucian LĂZĂRESCU, Adrian TRIF, Grigore Marian POP
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Volume 15, Numer 3, 2017, Strona(/y) 43-48, ISSN 1583-7904
Wydawca: Editura Politehnica

Evaluation of the turbocharger center housing flange influence onvibration measurements

Autorzy: Becze S., Vuscan I., Jiang B., Panc N.
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Volume 16, Numer 2, 2018, Strona(/y) 114-119, ISSN 1583-7904
Wydawca: Editura Politehnica

Hierarchical modeling of professional skills in the field of castings manufacture engineering

Autorzy: V Samuilă, V F Soporan, G Conțiu, S Pădurețu, T R Lehene, M M Vescan
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 209, 2017, Strona(/y) 012095, ISSN 1757-8981
Wydawca: Institute of Physics Publishing
DOI: 10.1088/1757-899x/209/1/012095

Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials

Autorzy: Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 01009, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713701009

Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer

Autorzy: Paul Bere, Adrian Popescu, Cristian Dudescu, Liana Hancu
Opublikowane w: MATEC Web of Conferences, Numer 112, 2017, Strona(/y) 04006, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201711204006

Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies

Autorzy: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 02010, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713702010

Influence of milling media on the structure and agglomeration behaviour of some hardmetal powder

Autorzy: H. F. Chicinaş, D. O. Jucan, T. F. Marinca, B. V. Neamțu, G. Conțiu, P. Götze, A. Eckert, C. O. Popa
Opublikowane w: Powder Metallurgy, Numer 61/4, 2018, Strona(/y) 342-347, ISSN 0032-5899
Wydawca: Maney Publishing
DOI: 10.1080/00325899.2018.1476081

Experimental studies on manufacturing of the complex shapes made from copper

Autorzy: Alina Ioana POPAN, Bogdan LUCA, Alexandru CAREAN
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 06005, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713706005

EXPERIMENTAL STUDY OF SURFACE ROUGHNESS IN THE CASE OF TURNING OF FREE-CUTTING STEEL AUT20 (22S20)

Autorzy: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer vol 15, issue 4, 2017, ISSN 1583-7904
Wydawca: Editura Politehnica

Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles

Autorzy: H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş
Opublikowane w: Advanced Powder Technology, Numer 29/8, 2018, Strona(/y) 1838-1847, ISSN 0921-8831
Wydawca: Elsevier BV
DOI: 10.1016/j.apt.2018.04.020

EXPERIMENTAL STUDY OF THE CUTTING RESULTANT FORCE FROM THE ALUMINIUM ALLOY TURNING PROCESS EN AW 6082

Autorzy: Claudiu Mihai NEDEZKI, Adrian TRIF, Florin BUGNAR
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer vol 14, issue 4, 2016, ISSN 1583-7904
Wydawca: Editura Politehnica

Experimental study on manufacturing complex parts from composite materials using water jet cutting

Autorzy: Popan Ioan Alexandru; Popan Alina Ioana
Opublikowane w: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numer Vol. 60, Numer 2, 2017, Strona(/y) 251-254, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

Experimental study on reverse engineering in case of composite materials cut by water jet cutting

Autorzy: Ioan Alexandru Popan, Nicolae Balc, Alina Popan, Alexandru Carean
Opublikowane w: MATEC Web of Conferences, Numer 178, 2018, Strona(/y) 03004, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201817803004

Geometrical modelling using matrix exponential functions for a serial robot structure

Autorzy: Schonstein C.,Negrea I., Panc N.,
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol 60 (3), 2017, Strona(/y) 403-408, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

EXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL

Autorzy: Adrian TRIF and Claudiu Mihai NEDEZKI
Opublikowane w: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numer VOL. 16, ISSUE 4, 2018, ISSN 1583-7904
Wydawca: Editura Politehnica

Finite element simulation of the C70 orthogonal cutting process

Autorzy: Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conțiu, Marius Bozga
Opublikowane w: MATEC Web of Conferences, Numer 112, 2017, Strona(/y) 06011, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201711206011

EXPERIMENTAL STUDY OF CUTTING PROCESSABILITY USING FACTORY METHODS

Autorzy: Claudiu Mihai NEDEZKI and AdrianTRIF
Opublikowane w: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numer VOL. 16, ISSUE 3, 2018, ISSN 1583-7904
Wydawca: Editura Politehnica

Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions

Autorzy: Ioan Turcin, Selver Softic, Udo Traussnigg, Adrian Trif
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 01016, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713701016

Innovative mechanical structure for hospital bed folding using a single actuator

Autorzy: Neamțu C., Popescu, S., Bere P., Comes, R.,
Opublikowane w: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering, Numer Vol. 59, 4, 2016, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718

Autorzy: TOMOIAGĂ, Vlad-Bogdan; POPA, Marcel Sabin; CONȚIU, Glad; FAUR, Adrian Sorin; SATTEL, Stefan
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol 61, no 3, 2018, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle

Autorzy: Nelu Pascalau, Ioan Vuscan, Nicolae Panc
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 03010, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713703010

Research on influence of gear honing process on involute helical gears quality

Autorzy: Pascalau N., Vuscan I., Jiang B., Panc N
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Vol 16 no 2, 2018, Strona(/y) 114-119, ISSN 1583-7904
Wydawca: Editura Politehnica

Low-cost industrial photogrammetry for rapid prototyping

Autorzy: Vlad Bocanet, Marius Bulgaru, Vlad Pop
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 06001, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713706001

Research on Inner Surface of Tubes Hydroformed

Autorzy: Vasile Ceclan, Sorin Grozav, Ivan Kuric
Opublikowane w: Advances in Science and Technology Research Journal, Numer 11/4, 2017, Strona(/y) 311-317, ISSN 2080-4075
Wydawca: Lublin University of Technology
DOI: 10.12913/22998624/80900

Proposal for a composite structure and graphic design for a parking barrier

Autorzy: Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere, Simona Rodean
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 08004, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713708004

PARTICULARITIES OF THE TURNING PROCESS FOR THE TITANIUM ALLOY Ti6Al4V

Autorzy: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer vol 15, issue 2,, 2017, ISSN 1583-7904
Wydawca: Editura Politehnica

Reamers cutting edge preparation for improvement the GGG 40 machining

Autorzy: Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur, Bogdan Luca
Opublikowane w: MATEC Web of Conferences, Numer 178, 2018, Strona(/y) 01014, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201817801014

Mechanical behavior of composite materials using the finite element analysis

Autorzy: Emilia Sabau, Adrian Popescu, Cristian Vilau
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 08006, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713708006

Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting

Autorzy: Ioan Alexandru Popan, Nicolae Bâlc, Alina Ioana Popan
Opublikowane w: MATEC Web of Conferences, Numer 121, 2017, Strona(/y) 02010, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201712102010

RESEARCH REGARDING A REDUCED CONTACT BETWEEN THE FLANKS SURFACE AND THE MATERIAL DURING TAPPING IN ORDER TO INCREASE MACHINING PRODUCTIVITY

Autorzy: Faur, Adrian Sorin; Popa, Marcel Sabin; Contiu, Glad; Tomoiaga, Vlad; Luca, Bogdan Cornel
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol 61 No 3, 2018, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

Kinematical modelling for R2T serial structure used in transfer parts between two workstations

Autorzy: Schonstein C., Panc N.
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol 60, No 3, 2017, Strona(/y) 409-416, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca

The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation

Autorzy: Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă, Vasile Ceclan
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 05002, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713705002

Theoretical analysis and practical case studies of powder-based additive manufacturing

Autorzy: Cosmin COSMA, Catalin MOLDOVAN, Ian CAMPBELL, Andrei COSMA, Nicolae BALC
Opublikowane w: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numer Vol. 61, Numer 3, 2018, Strona(/y) 369-378, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

The influence of silicon rubber aging on parts obtained in flexible molds

Autorzy: Nicolae PANC, Alina POPAN, Adrian Sever RADU, Adrian POPESCU
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol. 61, Numer 3, 2018, Strona(/y) 363-368, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

The design of a plastic injection mold for the part “Tensile Test Specimen”

Autorzy: Morar, C., Popescu, A
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Volume 60, No.2, 2017, Strona(/y) 319-324, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection

Autorzy: Alexandru Rus, Vasile-Dănuţ Leordean, Petru Berce
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 07007, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713707007

The influence of hole finishing strategies on quality

Autorzy: Vlad Bocanet, Nicolae Panc
Opublikowane w: MATEC Web of Conferences, Numer 137, 2017, Strona(/y) 03001, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201713703001

THE GRAPHICAL SIMULATION OF TRR SMALL-SIZED ROBOT

Autorzy: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol. 59, Numer 3, 2016, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

STUDIES ON THE CUTTING FORCES IN CASE OF STAINLESS STEEL TURNING OPERATION

Autorzy: Adrian TRIF
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer VOL. 16, ISSUE 2, 2018, ISSN 1583-7904
Wydawca: Editura Politehnica

THE KINEMATIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Autorzy: Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Opublikowane w: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numer vol 14, issue 4,, 2016, ISSN 1583-7904
Wydawca: Editura Politehnica

The influence of accuracy in establishing the origin of the part on the machining accuracy

Autorzy: Panc N., Schonstein C., Vuscan I.
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol 60 No3, 2017, Strona(/y) 393-398, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

Studies on designing and testing of a customized medical implant for the maxillofacial area

Autorzy: L. Jozsa, D. Leordean, C. Vilau
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Vol 15 No1, 2017, ISSN 1583-7904
Wydawca: Editura Politehnica

Utilisation of composite materials in the model aircraft construction

Autorzy: George Arghir, BERE Paul
Opublikowane w: Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, and Engineering,, Numer Vol 60 Nr. 1,, 2017, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

The mechanical characteristics of composite materials used for the rehabilitation of canals by means of lining

Autorzy: Mocean F, ACHIMAŞ G, BERE P, ACHIMAŞ S.,
Opublikowane w: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering,, Numer Vol. 58, No. 1,, 2016, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

THE PATH PLANNING OF TRR SMALL-SIZED ROBOT

Autorzy: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Opublikowane w: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numer Vol. 59, Numer 3, 2016, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

The influence of build orientation on the mechanical properties of medical implants made from PA 2200 by Selective Laser Sintering

Autorzy: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Opublikowane w: MATEC Web of Conferences, Numer 112, 2017, Strona(/y) 03009, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201711203009

Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method

Autorzy: Razvan Pacurar, Ancuta Pacurar, Serban Pop
Opublikowane w: MATEC Web of Conferences, Numer 178, 2018, Strona(/y) 02009, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201817802009

Theoretical Analysis And Practical Case Studies of SLA, Polyjet and FDM Manufacturing Techniques

Autorzy: C. Moldovan, C. Cosma, P. Berce, N. Balc
Opublikowane w: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numer Vol. 61, No 3,, 2018, ISSN 1221-5872
Wydawca: Technical University of Cluj-Napoca,

"Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part ""Body of Spark Plug"""

Autorzy: Călin Ciprian Otel, Razvan Păcurar, Daniel Filip, Monica Steopan, Paul Frîncu
Opublikowane w: Applied Mechanics and Materials, Numer 859, 2016, Strona(/y) 163-169, ISSN 1662-7482
Wydawca: TTP
DOI: 10.4028/www.scientific.net/amm.859.163

Microstructural Analysis of the Interface Between Some Superalloys and Composite/Ceramic Materials

Autorzy: Burde A.V., Cuc S., Radu A., Rusu M.A., Cosma C.S., Câmpian R.S., Leordean D.
Opublikowane w: Studia Universitatis Babes-Bolyai, Studia Chemia, Numer LXI, Numer 2, 2016, Strona(/y) 205-2014, ISSN 1224-7154
Wydawca: Universitatea Babes-Bolyai

PA 2200 vs. PMMA: Comparison Between the Mechanical Proprieties Obtained for the 2 Biocompatible Materials

Autorzy: Miron Borzan C. S., Dudescu M.C., Ceclan V., Trif A., Ridzon M., Berce P.,
Opublikowane w: MATERIALE PLASTICE, Numer Vol. 53, no. 1, 2016, Strona(/y) 1-5, ISSN 0025-5289
Wydawca: Syscom 18 s.r.l.

Influence of Ti-Ceramic or Ti-Composite crown on stress distribution: finite element study and additive manufacturing

Autorzy: Ispas, A., Cosma, C., Crăciun, A., Constantiniuc, M., Lascu, L., Leordean, D., Vilău, C.
Opublikowane w: Journal of Optoelectronics and Advanced Materials, Numer Vol 18 Numer 9-10, 2016, Strona(/y) 904-912, ISSN 1454-4164
Wydawca: National Institute of Research and Development for Optoelectronics

Additive manufacturing – a sustainable manufacturing route

Autorzy: Domniţa Frăţilă, Horaţiu Rotaru
Opublikowane w: MATEC Web of Conferences, Numer 94, 2017, Strona(/y) 03004, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/20179403004

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

Autorzy: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Opublikowane w: MATEC Web of Conferences, Numer 94, 2017, Strona(/y) 03008, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/20179403008

Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel

Autorzy: Domnita Fratila
Opublikowane w: Materials and Manufacturing Processes, Numer 31/5, 2015, Strona(/y) 657-666, ISSN 1042-6914
Wydawca: Marcel Dekker Inc.
DOI: 10.1080/10426914.2015.1004708

Basic Research on Lattice Structures Focused on the Strut Shape and Welding Beads

Autorzy: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Opublikowane w: Physics Procedia, Numer 83, 2016, Strona(/y) 833-838, ISSN 1875-3892
Wydawca: ELSEVIER
DOI: 10.1016/j.phpro.2016.08.086

Research on the mechanical behaviour of an airplane component made by selective laser melting technology

Autorzy: Răzvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc
Opublikowane w: MATEC Web of Conferences, Numer 94, 2017, Strona(/y) 03012, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/20179403012

Research of Environment-Friendly Techniques Influence on the Accuracy of Gear Processing in the Context of Sustainable Machining

Autorzy: Frăţilă Domnita
Opublikowane w: Proceedings of Romanian Academy, Numer Series A. Volume 14, Number 1, 2013, Strona(/y) 56 - 63, ISSN 1454-9069
Wydawca: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Selective laser melting of Ti6Al7Nb with hydroxyapatite addition

Autorzy: Teodora Marcu, Cinzia Menapace, Luca Girardini, Dan Leordean, Catalin Popa
Opublikowane w: Rapid Prototyping Journal, Numer 13552546, 2014, Strona(/y) 301-310, ISSN 1355-2546
Wydawca: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-09-2012-0083

Experimental and Theoretic Research Regarding Extrusion Optimization for Reinforced Polyamide (PA 6.6 – 10 % GF)

Autorzy: Adrian Popescu, Liana Livia Hancu, Paul Bere, Cristina Ștefana Miron-Borzan
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 125-130, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.125

Evaluation of Overall Efficiency of Devices with Worm Gear

Autorzy: Alexandru Micaciu, Ioan Vuşcan, Nicolae Panc
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 9-14, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.9

Research on Abrasive Water Jet Milling of the Planar Surfaces, Slots and Profiles

Autorzy: Alexandru Popan, Nicolae Balc, Alexandru Carean, Alina Luca, Alin Miron
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 409-414, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.409

In vivo behavior of surface modified Ti6Al7Nb alloys used in selective laser melting for custom-made implants. A preliminary study

Autorzy: Rotaru, H., Armencea, G., Spîrchez, D., Berce, C., Marcu, T., Leordean, D., Kim, S.-G., Bǎciuţ, M.
Opublikowane w: ROMANIAN JOURNAL OF MORPHOLOGY AND EMBRYOLOGY, Numer Vol. 54 - Numer 3, 2013, Strona(/y) 791-796, ISSN 1220-0522
Wydawca: Editura Academiei Republicii Socialiste Romania

Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending

Autorzy: Lucian Lăzărescu
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 02683768, 2013, Strona(/y) 85-91, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-012-3992-8

Research on How Lens Position of the Optical System is Influencing the Mechanical Characteristics of the Metallic Parts Made by Selective Laser Melting Equipment

Autorzy: Razvan Pacurar, Petru Berce
Opublikowane w: Advanced Engineering Forum, Numer 2234991X, 2013, Strona(/y) 285-292, ISSN 2234-991X
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.285

DETERMINATION OF MATERIAL PARAMETERS OF SHEET METALS USING THE HYDRAULIC BULGE TEST

Autorzy: Lucian Lăzărescu, Ioan Nicodim, Ioan Ciobanu, Dan Sorin Comşa, Dorel Banabic
Opublikowane w: Acta Metallurgica Slovaca, Numer 13351532, 2013, ISSN 1335-1532
Wydawca: Technicka Univerzita Kosice
DOI: 10.12776/ams.v19i1.81

The Analyses of Working Parameters for a 3D Complex Part Manufacturing by CNC Machine

Autorzy: Vasile Adrian Ceclan, Ioan Alexandru Popan, Sorin Dumitru Grozav, Cristina Ștefana Miron-Borzan, Ivan Kuric
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 286-291, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.286

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE SPRINGBACK ANGLE OF HIGH-STRENGTH STEELS

Autorzy: Jan Slota, Miroslav Jurcisin, Lucian Lazarescu
Opublikowane w: Acta Metallurgica Slovaca, Numer 13351532, 2014, ISSN 1335-1532
Wydawca: Technicka Univerzita Kosice
DOI: 10.12776/ams.v20i2.287

Effect of the Blank-Holding Load on the Drawing Force in the Deep-Drawing Process of Cylindrical and Square Cups

Autorzy: Lucian Lazarescu, Ioan Nicodim, Dan Sorin Comsa, Dorel Banabic
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 379-384, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.379

Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes

Autorzy: Lucian Lăzărescu, Ioan Ciobanu, Ioan Pavel Nicodim, Dan Sorin Comşa, Dorel Banabic
Opublikowane w: Key Engineering Materials, Numer 16629795, 2013, Strona(/y) 204-209, ISSN 1662-9795
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.554-557.204

Research on Improving the Outer Surface Quality of the Parts Made by SLM

Autorzy: Nicolae Bâlc, Sorin Cosmin Cosma, Julia Kessler, Voicu Mager
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 199-204, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.199

Studies Regarding Redesign and Optimization of the Main Shaft of a Naval Winch

Autorzy: Adina Sarca, Dan Leordean, Cristian Vilău
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 271-279, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.271

Methodology for evaluate the form deviations for formula one nose car

Autorzy: Paul Bere, Calin Neamtu
Opublikowane w: Open Engineering, Numer 23915439, 2014, Strona(/y) 148-154, ISSN 2391-5439
Wydawca: Walter de Gruyter GmbH & Co. KG
DOI: 10.2478/s13531-013-0158-x

Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling

Autorzy: Vasile Adrian Ceclan, Paul Bere, Marian Borzan, Sorin Grozav, Cristina Borzan
Opublikowane w: Revista de MATERIALE PLASTICE, Numer Vol. 50, no 2, 2013, Strona(/y) 79 - 83, ISSN 0025-5289
Wydawca: Syscom 18 s.r.l.

The Geometry Equations for Multiple Kinematic Structures Using Direct Geometry

Autorzy: Calin Beldean, Ioan Vuşcan, Kalman Kacso, Nicolae Panc
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 292-297, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.292

Device for Training of Machine Tool Diagnostic Routines under Various Conditions

Autorzy: Miroslav Císar, Ivan Kuric, Vasile Adrian Ceclan
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 3-8, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.3

Experimental Research Regarding the Tensile Strength of some Reinforced Composite Materials

Autorzy: Paul Bere, Adrian Popescu, Liana Livia Hancu
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 131-136, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.131

Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems

Autorzy: Adrian Coman, Andreas Gebhardt, Carol Patalita, Dănuţ Vasile Leordean
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2013, Strona(/y) 250-254, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.250

CNC Machining Of The Complex Copper Electrodes

Autorzy: Ioan Alexandru Popan, Nicolae Balc, Alina Popan
Opublikowane w: ACTA Universitatis Cibiniensis, Numer 15837149, 2015, Strona(/y) 153-158, ISSN 1583-7149
Wydawca: ACTA UNIVERSITATIS CIBINIENSIS – TECHNICAL SERIES
DOI: 10.1515/aucts-2015-0045

Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM

Autorzy: Dan Leordean, S. A. Radu, D. Frățilă, P. Berce
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 02683768, 2015, Strona(/y) 905-920, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-015-6873-0

The Accuracy of the Plastic Parts Milling Process Executed by a Six Axes Robot

Autorzy: Alexandru Popan, Nicolae Bâlc, Bogdan Luca, Alina Popan, Alexandru Carean
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 339-344, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.339

Kinematic Process Plastic Cold Orbital Forming

Autorzy: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Antoniu Turcu, Ovidiu Vasile Oprea
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 98-103, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.98

Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging

Autorzy: Lucian Lăzărescu, Dorel Banabic
Opublikowane w: Advanced Engineering Forum, Numer 2234991X, 2013, Strona(/y) 251-258, ISSN 2234-991X
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.251

Electrochemical and structural investigation on Ti6Al7Nb alloy, coated with hydroxyapatite and titanium dioxide

Autorzy: Viorica Saplontai, Monica Saplontai, Ioan Roman, Dan Leordean, Roxana Trusca, Tamas Robert Toth, Ileana Cojocaru, Nicolae Balc, Marioara Moldovan
Opublikowane w: CHEMISTRY MAGAZINE, Numer Volume: 65, Numer: 10, 2014, Strona(/y) 1249-1252, ISSN 0034-7752
Wydawca: Syscom 18 s.r.l.

Research Concerning Chalk‘s Influence on Composite-Based Melamine's Compressive Strength

Autorzy: Liana Livia Hancu, Horatiu Iancau, Paul Bere, Adrian Popescu
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 149-154, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.149

Design and Analyses to Determine the Minimum Acting Force of a Gripper for Handling the Parts with Robots

Autorzy: Cristian Vilău, Nicolae Bâlc, Dan Leordean
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 264-270, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.264

Researches Regarding the Influence of Cutting Regime on Processed Surface in Aluminum Alloys Turning Process

Autorzy: Adrian Trif, Marian Borzan, Alexandru Popan, Domniţa Fraţilă, Adriana Rus, Claudiu Nedezki
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 15-20, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.15

Design and Analysis of Carbon/Epoxy Composite Tubular Parts

Autorzy: Paul Bere, Ovidiu Nemes, Cristian Dudescu, Petru Berce, Emilia Sabau
Opublikowane w: Advanced Engineering Forum, Numer 2234991X, 2013, Strona(/y) 207-214, ISSN 2234-991X
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.207

Quality of the Hydroformed Tubular Parts

Autorzy: Vasile Adrian Ceclan, Nicolae Balc, Sorin Grozav, Paul Bere, Cristina Stefana Borzan
Opublikowane w: Advanced Engineering Forum, Numer 2234991X, 2013, Strona(/y) 215-224, ISSN 2234-991X
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.215

Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment

Autorzy: Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu, Khalid Abd Elghany, Vasile Ceclan, Petru Berce
Opublikowane w: Revista de MATERIALE PLASTICE, Numer Vol 52, no. 1,, 2015, Strona(/y) 39 -42, ISSN 0025-5289
Wydawca: Syscom 18 s.r.l.

Methods for Checking the Symmetry of the Formula One Car Nose

Autorzy: Călin Neamțu, Paul Bere
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2014, Strona(/y) 785-789, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.785

Development of a new procedure for the experimental determination of the Forming Limit Curves

Autorzy: D. Banabic, L. Lazarescu, L. Paraianu, I. Ciobanu, I. Nicodim, D.S. Comsa
Opublikowane w: CIRP Annals - Manufacturing Technology, Numer 00078506, 2013, Strona(/y) 255-258, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2013.03.051

Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology

Autorzy: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak, Nicolae Bâlc
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2014, Strona(/y) 231-235, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.231

Mold Design for Polystyrene Plastic Anchor

Autorzy: Calin Neamtu, Paul Bere, Corina Dobocan, Rares Ghinea, Sergiu Solcan
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 143-148, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.143

Predictive Performances of FLC Using Marciniak-Kuczynski Model and Modified Maximum Force Criterion

Autorzy: Dorel Banabic, Lucian Lazarescu, Dan Sorin Comsa
Opublikowane w: Key Engineering Materials, Numer 16629795, 2015, Strona(/y) 96-101, ISSN 1662-9795
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.651-653.96

Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations

Autorzy: Marko Vrh, Miroslav Halilovič, Bojan Starman, Boris Štok, Dan-Sorin Comsa, Dorel Banabic
Opublikowane w: European Journal of Mechanics - A/Solids, Numer 09977538, 2014, Strona(/y) 59-74, ISSN 0997-7538
Wydawca: Elsevier BV
DOI: 10.1016/j.euromechsol.2013.11.013

An evolving plane stress yield criterion based on crystal plasticity virtual experiments

Autorzy: Jerzy Gawad, Dorel Banabic, Albert Van Bael, Dan Sorin Comsa, Mihai Gologanu, Philip Eyckens, Paul Van Houtte, Dirk Roose
Opublikowane w: International Journal of Plasticity, Numer 07496419, 2015, Strona(/y) 141-169, ISSN 0749-6419
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.ijplas.2015.02.011

Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting

Autorzy: Voicu Mager, Nicolae Bâlc, Dan Leordean, Cristian Dudescu, Mathias Fockele
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2013, Strona(/y) 280-284, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.280

Dental follicle stem cells in bone regeneration on titanium implants

Autorzy: Ondine Lucaciu, Olga Soriţău, Dan Gheban, Dan Rus Ciuca, Oana Virtic, Adriana Vulpoi, Noemi Dirzu, Radu Câmpian, Grigore Băciuţ, Catalin Popa, Simion Simon, Petru Berce, Mihaela Băciuţ, Bogdan Crisan
Opublikowane w: BMC Biotechnology, Numer 14726750, 2015, ISSN 1472-6750
Wydawca: BioMed Central
DOI: 10.1186/s12896-015-0229-6

Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method

Autorzy: Razvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc, Anna Petrilak, Ladislav Morovič
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2013, Strona(/y) 478-482, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.478

Customized implants with specific properties, made by selective laser melting

Autorzy: Dan Leordean, Cristian Dudescu, Teodora Marcu, Petru Berce, Nicolae Balc
Opublikowane w: Rapid Prototyping Journal, Numer 13552546, 2015, Strona(/y) 98-104, ISSN 1355-2546
Wydawca: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-11-2012-0107

Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide

Autorzy: Adrian Popescu, Liana Hancu, Paul Bere
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2013, Strona(/y) 394-398, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.394

Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes

Autorzy: Adrian Coman, Simona Rodean, Dănuţ Vasile Leordean, Carol Patalita
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2013, Strona(/y) 188-192, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.188

Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology

Autorzy: Razvan Păcurar, Ancuţa Păcurar
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2014, Strona(/y) 236-240, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.236

Basic Research on Lattice Structures Focused on the Tensile Strength

Autorzy: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 193-198, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.193

Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding

Autorzy: Lucian Lazarescu, Ioan Nicodim, Dorel Banabic
Opublikowane w: Key Engineering Materials, Numer 16629795, 2015, Strona(/y) 33-40, ISSN 1662-9795
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.639.33

Surface Roughness Prediction During Dry Turning of Austenitic Stainless Steel AISI 304

Autorzy: Ioan Alexandru Popan, Nicolae Bâlc, Alina Popan, Domniţa Fraţilă, Adrian Trif
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 54-59, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.54

Using Simulation to Improve the Quality of the Metallic Industrial Components Made by Rapid Casting

Autorzy: Alina Popan, Nicolae Bâlc, Alexandru Popan, Nicolae Panc, Cristina Stefana Borzan
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 187-192, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.187

How the Crystallization Process in Metal Casting is Influenced by the Mold Filling and Cooling Methods<sup></sup>

Autorzy: Nicolae Panc, Nicolae Bâlc, Alina Popan
Opublikowane w: Applied Mechanics and Materials, Numer 16627482, 2015, Strona(/y) 92-97, ISSN 1662-7482
Wydawca: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.92

Research on the durability of injection molding tools made by selective laser sintering technology

Autorzy: R. Păcurar, P. Berce
Opublikowane w: Proceedings of the Romanian Academy, Numer Vol. 14, no. 3, 2013, Strona(/y) 234-241, ISSN 1220-5737
Wydawca: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Design and Analysis of Carbon/epoxy Composite Bicycle Handlebar

Autorzy: Bere P., Dudescu M. C., Balc N. , Berce P., Nemes O., Iurian A. M.
Opublikowane w: Revista de MATERIALE PLASTICE, Numer Vol. 51, No. 2, 2014, Strona(/y) 145-149, ISSN 0025-5289
Wydawca: Syscom 18 s.r.l.

Resin type influence on moulded parts final dimensions

Autorzy: Radu, S.A., Leordean, D., Bâlc, N., Nemeș. O.
Opublikowane w: Studia Universitatis Babes-Bolyai, Chemia, Numer Vol. 60 Numer 2, 2015, Strona(/y) 219-228, ISSN 1224-7154
Wydawca: Universitatea Babes-Bolyai

Maintaining availability through predictive maintenance actions through vibration profile analysis

Autorzy: Panc N., Kerekes G.
Opublikowane w: Academic Journal of Manufacturing Engineering, Numer Volume 13, Numer 4, 2015, Strona(/y) 22-25, ISSN 1583-7904
Wydawca: Editura Politehnica

Comparative Analysis of Surface Finishing for Different Cutting Strategies of Parts Made from POM C

Autorzy: Nicolae Panc, Glad Contiu, Vlad Bocanet
Opublikowane w: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Strona(/y) 324-332, ISBN 978-3-319-99352-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_35

Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions

Autorzy: Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc, Alina Ioan Popan
Opublikowane w: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Strona(/y) 105-113, ISBN 978-3-319-99352-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_12

Recycling of Polymeric Composite Materials

Autorzy: Emilia Sabău
Opublikowane w: Product Lifecycle Management - Terminology and Applications, 2018, ISBN 978-1-78984-542-6
Wydawca: IntechOpen
DOI: 10.5772/intechopen.81281

Applications of the Selective Laser Melting Technology in the Industrial and Medical Fields

Autorzy: Razvan Pacurar, Ancut Pacurar
Opublikowane w: New Trends in 3D Printing, 2016, ISBN 978-953-51-2479-5
Wydawca: InTech
DOI: 10.5772/63038

Chapter 3 “Surface Treatments Applied on Titanium Implants”, Advanced Industrial Engineering - New tendencies in material engineering

Autorzy: C. Cosma, N. Balc, M. Moldovan, P. Berce
Opublikowane w: 2017, Strona(/y) 65-84, ISBN 978-83-949709-2-9
Wydawca: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 4 Advanced composite materials and applications

Autorzy: Paul BERE
Opublikowane w: 2017, Strona(/y) 34, ISBN 978-83-949709-2-9
Wydawca: Fundacji Centrum Nowych Technologii

Chapter 2 “Medical Applications of Macro-Porous Structures Additive Manufactured”, Advanced Industrial Engineering - New tendencies in material engineering

Autorzy: C. Cosma, N. Balc, M. Moldovan, P. Berce
Opublikowane w: 2017, Strona(/y) 47-64, ISBN 978-83-949709-2-9
Wydawca: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 1 Composite Materials

Autorzy: Paul BERE
Opublikowane w: 2017, Strona(/y) 38, ISBN 978-83-949709-2-9
Wydawca: Fundacji Centrum Nowych Technologii

Sustainable Manufacturing Through Environmentally-Friendly Machining

Autorzy: Domnita Fratila
Opublikowane w: Green Manufacturing Processes and Systems, 2013, Strona(/y) 1-21, ISBN 978-3-642-33792-5
Wydawca: Springer Berlin Heidelberg
DOI: 10.1007/978-3-642-33792-5_1

An Innovative Procedure for the Experimental Determination of the Forming Limit Curves

Autorzy: Dorel Banabic, Lucian Lazarescu, Dan-Sorin Comsa
Opublikowane w: 60 Excellent Inventions in Metal Forming, 2015, Strona(/y) 11-16, ISBN 978-3-662-46312-3
Wydawca: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_2

BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes

Autorzy: Dorel Banabic, Dan-Sorin Comsa
Opublikowane w: 60 Excellent Inventions in Metal Forming, 2015, Strona(/y) 49-54, ISBN 978-3-662-46312-3
Wydawca: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_8

Environmentally friendly Manufacturing Processes in the Context of Transition to Sustainable Production

Autorzy: D. Fratila
Opublikowane w: Comprehensive Materials Processing, 2014, Strona(/y) 163-175, ISBN 9780080965338
Wydawca: Elsevier
DOI: 10.1016/B978-0-08-096532-1.00815-3

Analysis on the abrasive water-jet milling process on titanium alloys

Autorzy: Popan I.A., Balc N., Popan, A.I., Carean, A., Ceclan, V.A.
Opublikowane w: International Conference on Production Research - Africa, Europe and the Middle East (ICPR-AEM) / 4th International Conference on Quality and Innovation in Engineering and Management (QIEM), 2016, ISBN 978-606-737-180-2
Wydawca: UT Press

Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties

Autorzy: M. Pustan, C. Birleanu, A. Trif, S. Garabagiu, D. Marconi, L. Barbu-Tudoran
Opublikowane w: 2018 International Semiconductor Conference (CAS), 2018, Strona(/y) 83-86, ISBN 978-1-5386-4482-9
Wydawca: IEEE
DOI: 10.1109/smicnd.2018.8539738

Study on manufacturing implants of biocomposite materials by water jet cutting

Autorzy: Ioan Alexandru Popan, Nicolae Balc and Alina Ioana Popan
Opublikowane w: Proceedings of 7th International Conference on Additive Technologies – ICAT, 2018, Strona(/y) 48-50, ISBN 978-961-288-789-6
Wydawca: Interesansa-zavod, Ljubljana

Design for Additive Manufacturing a Sweat Gland Simulator

Autorzy: Turcin, C. Cosma, A. Abdallah, N. Balc
Opublikowane w: 7th International Conference on Additive Technologies, 2018
Wydawca: Maribor

The Mechanism of Deformation Process in Case of Orbital Deformation

Autorzy: Grozav S.D., Ceclan V.A., Kuric I.
Opublikowane w: International Conference on Quality and Innovation in Engineering and Management, 2016, Strona(/y) 489-493, ISBN 978-606-737-180-2
Wydawca: UTPRESS

Assessing The Value Of 3D Printed Personalised Products

Autorzy: Abdul Kudus, SI, Campbell, RI, Bibb, R
Opublikowane w: MCP-CE, 2016
Wydawca: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management

Using acetone (propanone) as a post-production finishing technique: Crossing the divide between art and technology

Autorzy: Havenga, SP, De Beer, DJ, Van Tonder, PJM, Campbell, RI
Opublikowane w: Conference Papers and Presentations (Design School), 2016, Strona(/y) 430-442, ISBN 978-961-281-579-0
Wydawca: Interesansa - zavod

Arousing Enthusiasm for STEM: Teaching 3D Printing Technology

Autorzy: A. Gebhardt, L. Thurn
Opublikowane w: Conference Proceedings. New Perspectives in Science Education, Numer 6th Edition, 2017, Strona(/y) 87-92, ISBN 978-88-6292-847-2
Wydawca: Pixel

Analysis on the Abrasive Water-Jet Milling Process on Titanium Alloys

Autorzy: A. Popan, N. Bâlc, A. I. Popan, A. Cărean, V. A. Ceclan
Opublikowane w: International Conference on Quality and Innovation in Engineering and Management, 2016, ISBN 978-606-737-180-2
Wydawca: UT Press

Design and manufacturing methodology for F1 nose car

Autorzy: Bere Paul, Neamtu Calin
Opublikowane w: International Conference on Production Research - Regional Conference Africa, 2014, Strona(/y) 21-26, ISBN 978-973-662-978-5
Wydawca: TECHNICAL UNIV CLUJ-NAPOCA

Improving the design of a wind turbine blade

Autorzy: Ghinea, R., Bere, P., Neamtu, C.
Opublikowane w: International Conference on Production Research - Regional Conference Africa, 2014, Strona(/y) 221-226, ISBN 978-973-662-978-5
Wydawca: TECHNICAL UNIV CLUJ-NAPOCA

DEVELOPMENT AND TESTING OF MINERAL CASTING FOR USE IN STRUCTURAL ELEMENTS AND MOLD MAKING

Autorzy: Mihai CIUPAN, Marcel POPA, Ioan Pavel ŞOŞA, Glad CONŢIU, Emilia CIUPAN
Opublikowane w: ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2018, ISSN 1221-5872
Wydawca: Cluj-Napoca Technical University of Cluj-Napoca

Fabricaţia pieselor din materiale compozite prin procedeul de transfer in matriţă,

Autorzy: Claudiu Florea, Paul Bere
Opublikowane w: 2017, Strona(/y) 256, ISBN 978-606-737-229-8
Wydawca: UTPRESS

Proiectarea Produselor - Aplicații

Autorzy: D. Leordean
Opublikowane w: 2018, Strona(/y) 117 pagini, ISBN 978-606-737-323-3
Wydawca: UTPRESS

Aplicatiile medicale ale tehnologiilor de fabricatie prin adaugare de material

Autorzy: Berce P, Balc N, Chezan H, Leordean D, Mager V, Borzan C, Berce C
Opublikowane w: Editura Academiei Romane, Numer Premiul Academiei Române, Premiul 'Henri Coandă, Ceremonie de decernare: 15 decembrie 2017, 2017, ISBN 978-973-27-2591-7
Wydawca: Editura Academiei Romane

Fabricaţia materialelor compozite. Materiale, Metode, Aplicaţii

Autorzy: Paul BERE, Marin GUŢU
Opublikowane w: Editura Tehnică UTM, 2018, Strona(/y) 328, ISBN 978-9975-45-538-1
Wydawca: Universitatea Tehnică a Moldovei

ADVANCED INDUSTRIAL ENGINEERING, NEW TENDENCIES IN MATERIAL ENGINEERING

Autorzy: Bere Paul
Opublikowane w: 2017, ISBN 978-83-947909-2-9
Wydawca: Wydawnictwo

Tehnologii neconvenţionale şi de prototipare rapidă

Autorzy: N. Bâlc, R. Păcurar
Opublikowane w: 2016, Strona(/y) 70, ISBN 978-973-53-1792-8
Wydawca: Risoprint

Modern Technologies in Manufacturing

Autorzy: Balc Nicolae
Opublikowane w: Applied Mechanics and Materials, 2015, Strona(/y) 394, ISBN 978-3-03835-653-0
Wydawca: Trans Tech Publications

Tehnologii de fabricaţie prin adaugare de material şi aplicaţiile lor

Autorzy: Berce Petru, Bâlc Nicolae, Păcurar Razvan
Opublikowane w: 2014, Strona(/y) 387, ISBN 978-973-27-2396-8
Wydawca: Editura Academiei Romane

Fabricaţia pieselor metalice prin topire selectivă cu laser, cu aplicabilitate în domeniul industrial

Autorzy: Păcurar Razvan
Opublikowane w: 2015, Strona(/y) 250, ISBN 978-9975-63-382-6
Wydawca: Editura Tehnică-Info

Proiectarea dispozitivelor-Îndrumător de laborator

Autorzy: Panc Nicolae, Vușcan Ioan, Păunescu Daniela, Gligor Gheorghe
Opublikowane w: 2014, Strona(/y) 128, ISBN 978-973-662-966-2
Wydawca: Editura UT Press

Fabricaţia implanturilor medicale personalizate prin topire selectivă cu laser – studiu de caz

Autorzy: R., Păcurar, A. Petrilak
Opublikowane w: 2015, Strona(/y) 120, ISBN 9789735316457
Wydawca: Editura Risoprint

The efficiency of the technologies for low volume production of the dental implants

Autorzy: Marișca Viorica Saplonțai
Opublikowane w: PhD. Coordinator: Nicolae Balc, 2014
Wydawca: Technical University of Cluj-Napoca

Materials and methods used for the filters to fix the heavy metals

Autorzy: Monica Saplonțai
Opublikowane w: PhD. Coordinator: Nicolae Balc, 2014
Wydawca: Technical University of Cluj-Napoca

Research on selective laser melting manufacturing of the medical implants with composite structures basis

Autorzy: Voicu Mager
Opublikowane w: PhD. Coordinator: Nicolae Balc, 2014
Wydawca: Technical University of Cluj-Napoca

Research on developing the water jet cutting process for composite materials machining

Autorzy: Alin Vasile Miron
Opublikowane w: PhD. Coordinator: Nicolae Balc, 2015
Wydawca: Technical University of Cluj-Napoca

Research on improving the manufacturing process of the medical implants made by SLM from titanium powder

Autorzy: Sorin Cosmin Cosma
Opublikowane w: PhD. Coordinator: Nicolae Balc, 2015
Wydawca: Technical University of Cluj-Napoca

Theoretical and experimental research on using the RP models to manufacture maxilla-facial implants

Autorzy: Flaviu Horea Chezan
Opublikowane w: PhD. Coordinator: Petru Berce, 2014
Wydawca: Technical University of Cluj-Napoca

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz