Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca

Risultati finali

1-2 newsletters will be produced per year during project Period 1.

Support materials to support the promotion of the project consisting in a leaflet (2 pages, A4 size) and a project poster (A1 size)

Project website

The project website will contain the following sections: home, project summary, partners profiles, news and events and project downloads (including the promotional materials, project newsletters and public deliverables). The project website will be implemented in English and Romanian.

Promotion guide about TUCN

Brochure promoting the S&T excellence of TUCN in the field of additive manufacturing. The document will consist in 30+ pages describing TUCN's RDI activities, research capacities, previous national and international projects, list of publications, research interests for further cooperation and significant achievements.

Project Newsletters -Period 2

1-2 newsletters will be produced per year during project Period 2.

One page statement that Task 4.3 has been completed

List of all publications (in the particular field of research) of the coordinator during the 3 years preceding the start date of the project.

Pubblicazioni

Design for Additive Manufacturing, to produce assembled products, by SLS

Autori: Nicolae Bâlc, Cristian Vilău
Pubblicato in: MATEC Web of Conferences, Numero 121, 2017, Pagina/e 04002, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201712104002

Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide

Autori: Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 08005, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713708005

Carbon epoxy front hood for an electrical city vehicle

Autori: Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes, Sergiu Solcan
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 08001, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713708001

ANALYSIS DISTRIBUTION OF THE EQUIVALENT PLASTIC STRAIN, CONTACT PRESSURE AND TEMPERATURE DURING THE METAL TUBES EXTRUSION

Autori: Petru Paul DINCU, Gheorghe ACHIMAȘ, Adriana NEAG and Adrian TRIF
Pubblicato in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numero VOL.16, ISSUE 1, 2018, ISSN 1583-7904
Editore: Editura Politehnica

ANALYSIS OF CUTTING FORCES AT DRY AND NEAR-DRY TURNING OF AISI 316L STAINLESS STEEL

Autori: Domnița FRĂȚILĂ, Adrian TRIF and Alexandru POPAN
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero VOL. 16, ISSUE 4, 2018, Pagina/e 19-26, ISSN 1583-7904
Editore: Editura Politehnica

Design and manufacturing front hood for electric vehicle by carbon fibber

Autori: Paul Bere, Calin Neamtu, Cristian Dudescu
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 07021, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711207021

Calculation of the contact surface in the orbital deformation of the cylindrical workpiece

Autori: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca
Pubblicato in: Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering, Numero vol 61 no 4, 2018, Pagina/e 695-700, ISSN 1221-5872
Editore: UTCN

Analysis and optimization of cutting parameters in drilling operation of EM AW2007 aluminum alloy

Autori: Frăţilă, D., Popan, A
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Vol.16 No1, 2018, Pagina/e 19-26, ISSN 1583-7904
Editore: Editura Politehnica

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3

Autori: Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma, Alexandru Carean
Pubblicato in: MATEC Web of Conferences, Numero 94, 2017, Pagina/e 02011, ISSN 2261-236X
Editore: MATEC
DOI: 10.1051/matecconf/20179402011

Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction

Autori: Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P
Pubblicato in: Studia Universitatis Babes-Bolyai Chemia, Numero 61/2, 2016, Pagina/e 249-260, ISSN 1224-7154
Editore: Universitatea Babes-Bolyai

Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process

Autori: Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad
Pubblicato in: REVISTA DE CHIMIE, Numero 69, 4, 2018, Pagina/e 886-889, ISSN 0034-7752
Editore: Syscom 18 s.r.l.

About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants

Autori: Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc, Mihaela Suciu
Pubblicato in: MATEC Web of Conferences, Numero 178, 2018, Pagina/e 04007, ISSN 2261-236X
Editore: Matec
DOI: 10.1051/matecconf/201817804007

Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles

Autori: Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister, Calin Ciprian Otel
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 01008, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713701008

Post-processing of customized implants made by laser beam melting from pure Titanium

Autori: Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan
Pubblicato in: Journal of Optoelectronics and Advanced Materials, Numero Vol. 19, No. 11-12, 2017, Pagina/e 738-747, ISSN 1454-4164
Editore: National Institute of Research and Development for Optoelectronics

Determination of mechanical properties of carbon/epoxy plates by tensile stress test

Autori: Paul Bere, Jolanta B. Krolczyk
Pubblicato in: E3S Web of Conferences, Numero 19, 2017, Pagina/e 03018, ISSN 2267-1242
Editore: EDP Sciences
DOI: 10.1051/e3sconf/20171903018

Determination of the force required for the hydroforming of al 99,5

Autori: Vasile Ceclan, Sorin Grozav
Pubblicato in: MATEC Web of Conferences, Numero 244, 2018, Pagina/e 01003, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201824401003

Direct manufacturing of customized implants from biometals, by 3D printing

Autori: C. Cosma, N. Balc, P. Berce, A. Popan, A. Cosma, A. Burde
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Vol. 15, No. 4, 2017, Pagina/e 42-49, ISSN 1583-7904
Editore: Editura Politehnica

Effect of temperature on the mechanical properties of extrusion glass fiber reinforced polyamide 6.6 composites (GFRPA 6.6)

Autori: Popescu, A., Hancu, L., Sabau, E
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Volume 61, No.2, 2018, Pagina/e 213-218, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

DYNAMIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Autori: Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Pubblicato in: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numero Vol. 60, Numero I, 2017, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

Establishing the jacobian matrix for a three degrees of freedom serial structure

Autori: Schonstein C., Panc N.
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Volume 61, No. 1, 2018, Pagina/e 93-98, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

EVALUATION OF BIODEGRADABLE LUBRICANTS BY FORWARD CONICAL CUP – BACKWARD STRAIGHT CUP EXTRUSION TEST

Autori: Alexandru BUCUR, Gheorghe ACHIMAȘ, Lucian LĂZĂRESCU, Adrian TRIF, Grigore Marian POP
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Volume 15, Numero 3, 2017, Pagina/e 43-48, ISSN 1583-7904
Editore: Editura Politehnica

Evaluation of the turbocharger center housing flange influence onvibration measurements

Autori: Becze S., Vuscan I., Jiang B., Panc N.
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Volume 16, Numero 2, 2018, Pagina/e 114-119, ISSN 1583-7904
Editore: Editura Politehnica

Hierarchical modeling of professional skills in the field of castings manufacture engineering

Autori: V Samuilă, V F Soporan, G Conțiu, S Pădurețu, T R Lehene, M M Vescan
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 209, 2017, Pagina/e 012095, ISSN 1757-8981
Editore: Institute of Physics Publishing
DOI: 10.1088/1757-899x/209/1/012095

Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials

Autori: Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 01009, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713701009

Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer

Autori: Paul Bere, Adrian Popescu, Cristian Dudescu, Liana Hancu
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 04006, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711204006

Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies

Autori: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 02010, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713702010

Influence of milling media on the structure and agglomeration behaviour of some hardmetal powder

Autori: H. F. Chicinaş, D. O. Jucan, T. F. Marinca, B. V. Neamțu, G. Conțiu, P. Götze, A. Eckert, C. O. Popa
Pubblicato in: Powder Metallurgy, Numero 61/4, 2018, Pagina/e 342-347, ISSN 0032-5899
Editore: Maney Publishing
DOI: 10.1080/00325899.2018.1476081

Experimental studies on manufacturing of the complex shapes made from copper

Autori: Alina Ioana POPAN, Bogdan LUCA, Alexandru CAREAN
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 06005, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713706005

EXPERIMENTAL STUDY OF SURFACE ROUGHNESS IN THE CASE OF TURNING OF FREE-CUTTING STEEL AUT20 (22S20)

Autori: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero vol 15, issue 4, 2017, ISSN 1583-7904
Editore: Editura Politehnica

Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles

Autori: H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş
Pubblicato in: Advanced Powder Technology, Numero 29/8, 2018, Pagina/e 1838-1847, ISSN 0921-8831
Editore: Elsevier BV
DOI: 10.1016/j.apt.2018.04.020

EXPERIMENTAL STUDY OF THE CUTTING RESULTANT FORCE FROM THE ALUMINIUM ALLOY TURNING PROCESS EN AW 6082

Autori: Claudiu Mihai NEDEZKI, Adrian TRIF, Florin BUGNAR
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero vol 14, issue 4, 2016, ISSN 1583-7904
Editore: Editura Politehnica

Experimental study on manufacturing complex parts from composite materials using water jet cutting

Autori: Popan Ioan Alexandru; Popan Alina Ioana
Pubblicato in: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numero Vol. 60, Numero 2, 2017, Pagina/e 251-254, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

Experimental study on reverse engineering in case of composite materials cut by water jet cutting

Autori: Ioan Alexandru Popan, Nicolae Balc, Alina Popan, Alexandru Carean
Pubblicato in: MATEC Web of Conferences, Numero 178, 2018, Pagina/e 03004, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201817803004

Geometrical modelling using matrix exponential functions for a serial robot structure

Autori: Schonstein C.,Negrea I., Panc N.,
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol 60 (3), 2017, Pagina/e 403-408, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

EXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL

Autori: Adrian TRIF and Claudiu Mihai NEDEZKI
Pubblicato in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numero VOL. 16, ISSUE 4, 2018, ISSN 1583-7904
Editore: Editura Politehnica

Finite element simulation of the C70 orthogonal cutting process

Autori: Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conțiu, Marius Bozga
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 06011, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711206011

EXPERIMENTAL STUDY OF CUTTING PROCESSABILITY USING FACTORY METHODS

Autori: Claudiu Mihai NEDEZKI and AdrianTRIF
Pubblicato in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numero VOL. 16, ISSUE 3, 2018, ISSN 1583-7904
Editore: Editura Politehnica

Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions

Autori: Ioan Turcin, Selver Softic, Udo Traussnigg, Adrian Trif
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 01016, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713701016

Innovative mechanical structure for hospital bed folding using a single actuator

Autori: Neamțu C., Popescu, S., Bere P., Comes, R.,
Pubblicato in: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering, Numero Vol. 59, 4, 2016, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718

Autori: TOMOIAGĂ, Vlad-Bogdan; POPA, Marcel Sabin; CONȚIU, Glad; FAUR, Adrian Sorin; SATTEL, Stefan
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol 61, no 3, 2018, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle

Autori: Nelu Pascalau, Ioan Vuscan, Nicolae Panc
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 03010, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713703010

Research on influence of gear honing process on involute helical gears quality

Autori: Pascalau N., Vuscan I., Jiang B., Panc N
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Vol 16 no 2, 2018, Pagina/e 114-119, ISSN 1583-7904
Editore: Editura Politehnica

Low-cost industrial photogrammetry for rapid prototyping

Autori: Vlad Bocanet, Marius Bulgaru, Vlad Pop
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 06001, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713706001

Research on Inner Surface of Tubes Hydroformed

Autori: Vasile Ceclan, Sorin Grozav, Ivan Kuric
Pubblicato in: Advances in Science and Technology Research Journal, Numero 11/4, 2017, Pagina/e 311-317, ISSN 2080-4075
Editore: Lublin University of Technology
DOI: 10.12913/22998624/80900

Proposal for a composite structure and graphic design for a parking barrier

Autori: Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere, Simona Rodean
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 08004, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713708004

PARTICULARITIES OF THE TURNING PROCESS FOR THE TITANIUM ALLOY Ti6Al4V

Autori: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero vol 15, issue 2,, 2017, ISSN 1583-7904
Editore: Editura Politehnica

Reamers cutting edge preparation for improvement the GGG 40 machining

Autori: Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur, Bogdan Luca
Pubblicato in: MATEC Web of Conferences, Numero 178, 2018, Pagina/e 01014, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201817801014

Mechanical behavior of composite materials using the finite element analysis

Autori: Emilia Sabau, Adrian Popescu, Cristian Vilau
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 08006, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713708006

Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting

Autori: Ioan Alexandru Popan, Nicolae Bâlc, Alina Ioana Popan
Pubblicato in: MATEC Web of Conferences, Numero 121, 2017, Pagina/e 02010, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201712102010

RESEARCH REGARDING A REDUCED CONTACT BETWEEN THE FLANKS SURFACE AND THE MATERIAL DURING TAPPING IN ORDER TO INCREASE MACHINING PRODUCTIVITY

Autori: Faur, Adrian Sorin; Popa, Marcel Sabin; Contiu, Glad; Tomoiaga, Vlad; Luca, Bogdan Cornel
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol 61 No 3, 2018, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

Kinematical modelling for R2T serial structure used in transfer parts between two workstations

Autori: Schonstein C., Panc N.
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol 60, No 3, 2017, Pagina/e 409-416, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca

The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation

Autori: Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă, Vasile Ceclan
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 05002, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713705002

Theoretical analysis and practical case studies of powder-based additive manufacturing

Autori: Cosmin COSMA, Catalin MOLDOVAN, Ian CAMPBELL, Andrei COSMA, Nicolae BALC
Pubblicato in: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numero Vol. 61, Numero 3, 2018, Pagina/e 369-378, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

The influence of silicon rubber aging on parts obtained in flexible molds

Autori: Nicolae PANC, Alina POPAN, Adrian Sever RADU, Adrian POPESCU
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol. 61, Numero 3, 2018, Pagina/e 363-368, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

The design of a plastic injection mold for the part “Tensile Test Specimen”

Autori: Morar, C., Popescu, A
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Volume 60, No.2, 2017, Pagina/e 319-324, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection

Autori: Alexandru Rus, Vasile-Dănuţ Leordean, Petru Berce
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 07007, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713707007

The influence of hole finishing strategies on quality

Autori: Vlad Bocanet, Nicolae Panc
Pubblicato in: MATEC Web of Conferences, Numero 137, 2017, Pagina/e 03001, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201713703001

THE GRAPHICAL SIMULATION OF TRR SMALL-SIZED ROBOT

Autori: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol. 59, Numero 3, 2016, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

STUDIES ON THE CUTTING FORCES IN CASE OF STAINLESS STEEL TURNING OPERATION

Autori: Adrian TRIF
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero VOL. 16, ISSUE 2, 2018, ISSN 1583-7904
Editore: Editura Politehnica

THE KINEMATIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Autori: Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Pubblicato in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numero vol 14, issue 4,, 2016, ISSN 1583-7904
Editore: Editura Politehnica

The influence of accuracy in establishing the origin of the part on the machining accuracy

Autori: Panc N., Schonstein C., Vuscan I.
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol 60 No3, 2017, Pagina/e 393-398, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

Studies on designing and testing of a customized medical implant for the maxillofacial area

Autori: L. Jozsa, D. Leordean, C. Vilau
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Vol 15 No1, 2017, ISSN 1583-7904
Editore: Editura Politehnica

Utilisation of composite materials in the model aircraft construction

Autori: George Arghir, BERE Paul
Pubblicato in: Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, and Engineering,, Numero Vol 60 Nr. 1,, 2017, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

The mechanical characteristics of composite materials used for the rehabilitation of canals by means of lining

Autori: Mocean F, ACHIMAŞ G, BERE P, ACHIMAŞ S.,
Pubblicato in: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering,, Numero Vol. 58, No. 1,, 2016, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

THE PATH PLANNING OF TRR SMALL-SIZED ROBOT

Autori: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Pubblicato in: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numero Vol. 59, Numero 3, 2016, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

The influence of build orientation on the mechanical properties of medical implants made from PA 2200 by Selective Laser Sintering

Autori: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 03009, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711203009

Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method

Autori: Razvan Pacurar, Ancuta Pacurar, Serban Pop
Pubblicato in: MATEC Web of Conferences, Numero 178, 2018, Pagina/e 02009, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201817802009

Theoretical Analysis And Practical Case Studies of SLA, Polyjet and FDM Manufacturing Techniques

Autori: C. Moldovan, C. Cosma, P. Berce, N. Balc
Pubblicato in: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numero Vol. 61, No 3,, 2018, ISSN 1221-5872
Editore: Technical University of Cluj-Napoca,

"Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part ""Body of Spark Plug"""

Autori: Călin Ciprian Otel, Razvan Păcurar, Daniel Filip, Monica Steopan, Paul Frîncu
Pubblicato in: Applied Mechanics and Materials, Numero 859, 2016, Pagina/e 163-169, ISSN 1662-7482
Editore: TTP
DOI: 10.4028/www.scientific.net/amm.859.163

Microstructural Analysis of the Interface Between Some Superalloys and Composite/Ceramic Materials

Autori: Burde A.V., Cuc S., Radu A., Rusu M.A., Cosma C.S., Câmpian R.S., Leordean D.
Pubblicato in: Studia Universitatis Babes-Bolyai, Studia Chemia, Numero LXI, Numero 2, 2016, Pagina/e 205-2014, ISSN 1224-7154
Editore: Universitatea Babes-Bolyai

PA 2200 vs. PMMA: Comparison Between the Mechanical Proprieties Obtained for the 2 Biocompatible Materials

Autori: Miron Borzan C. S., Dudescu M.C., Ceclan V., Trif A., Ridzon M., Berce P.,
Pubblicato in: MATERIALE PLASTICE, Numero Vol. 53, no. 1, 2016, Pagina/e 1-5, ISSN 0025-5289
Editore: Syscom 18 s.r.l.

Influence of Ti-Ceramic or Ti-Composite crown on stress distribution: finite element study and additive manufacturing

Autori: Ispas, A., Cosma, C., Crăciun, A., Constantiniuc, M., Lascu, L., Leordean, D., Vilău, C.
Pubblicato in: Journal of Optoelectronics and Advanced Materials, Numero Vol 18 Numero 9-10, 2016, Pagina/e 904-912, ISSN 1454-4164
Editore: National Institute of Research and Development for Optoelectronics

Additive manufacturing – a sustainable manufacturing route

Autori: Domniţa Frăţilă, Horaţiu Rotaru
Pubblicato in: MATEC Web of Conferences, Numero 94, 2017, Pagina/e 03004, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/20179403004

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

Autori: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Pubblicato in: MATEC Web of Conferences, Numero 94, 2017, Pagina/e 03008, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/20179403008

Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel

Autori: Domnita Fratila
Pubblicato in: Materials and Manufacturing Processes, Numero 31/5, 2015, Pagina/e 657-666, ISSN 1042-6914
Editore: Marcel Dekker Inc.
DOI: 10.1080/10426914.2015.1004708

Basic Research on Lattice Structures Focused on the Strut Shape and Welding Beads

Autori: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Pubblicato in: Physics Procedia, Numero 83, 2016, Pagina/e 833-838, ISSN 1875-3892
Editore: ELSEVIER
DOI: 10.1016/j.phpro.2016.08.086

Research on the mechanical behaviour of an airplane component made by selective laser melting technology

Autori: Răzvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc
Pubblicato in: MATEC Web of Conferences, Numero 94, 2017, Pagina/e 03012, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/20179403012

Research of Environment-Friendly Techniques Influence on the Accuracy of Gear Processing in the Context of Sustainable Machining

Autori: Frăţilă Domnita
Pubblicato in: Proceedings of Romanian Academy, Numero Series A. Volume 14, Number 1, 2013, Pagina/e 56 - 63, ISSN 1454-9069
Editore: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Selective laser melting of Ti6Al7Nb with hydroxyapatite addition

Autori: Teodora Marcu, Cinzia Menapace, Luca Girardini, Dan Leordean, Catalin Popa
Pubblicato in: Rapid Prototyping Journal, Numero 13552546, 2014, Pagina/e 301-310, ISSN 1355-2546
Editore: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-09-2012-0083

Experimental and Theoretic Research Regarding Extrusion Optimization for Reinforced Polyamide (PA 6.6 – 10 % GF)

Autori: Adrian Popescu, Liana Livia Hancu, Paul Bere, Cristina Ștefana Miron-Borzan
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 125-130, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.125

Evaluation of Overall Efficiency of Devices with Worm Gear

Autori: Alexandru Micaciu, Ioan Vuşcan, Nicolae Panc
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 9-14, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.9

Research on Abrasive Water Jet Milling of the Planar Surfaces, Slots and Profiles

Autori: Alexandru Popan, Nicolae Balc, Alexandru Carean, Alina Luca, Alin Miron
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 409-414, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.409

In vivo behavior of surface modified Ti6Al7Nb alloys used in selective laser melting for custom-made implants. A preliminary study

Autori: Rotaru, H., Armencea, G., Spîrchez, D., Berce, C., Marcu, T., Leordean, D., Kim, S.-G., Bǎciuţ, M.
Pubblicato in: ROMANIAN JOURNAL OF MORPHOLOGY AND EMBRYOLOGY, Numero Vol. 54 - Numero 3, 2013, Pagina/e 791-796, ISSN 1220-0522
Editore: Editura Academiei Republicii Socialiste Romania

Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending

Autori: Lucian Lăzărescu
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 02683768, 2013, Pagina/e 85-91, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-012-3992-8

Research on How Lens Position of the Optical System is Influencing the Mechanical Characteristics of the Metallic Parts Made by Selective Laser Melting Equipment

Autori: Razvan Pacurar, Petru Berce
Pubblicato in: Advanced Engineering Forum, Numero 2234991X, 2013, Pagina/e 285-292, ISSN 2234-991X
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.285

DETERMINATION OF MATERIAL PARAMETERS OF SHEET METALS USING THE HYDRAULIC BULGE TEST

Autori: Lucian Lăzărescu, Ioan Nicodim, Ioan Ciobanu, Dan Sorin Comşa, Dorel Banabic
Pubblicato in: Acta Metallurgica Slovaca, Numero 13351532, 2013, ISSN 1335-1532
Editore: Technicka Univerzita Kosice
DOI: 10.12776/ams.v19i1.81

The Analyses of Working Parameters for a 3D Complex Part Manufacturing by CNC Machine

Autori: Vasile Adrian Ceclan, Ioan Alexandru Popan, Sorin Dumitru Grozav, Cristina Ștefana Miron-Borzan, Ivan Kuric
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 286-291, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.286

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE SPRINGBACK ANGLE OF HIGH-STRENGTH STEELS

Autori: Jan Slota, Miroslav Jurcisin, Lucian Lazarescu
Pubblicato in: Acta Metallurgica Slovaca, Numero 13351532, 2014, ISSN 1335-1532
Editore: Technicka Univerzita Kosice
DOI: 10.12776/ams.v20i2.287

Effect of the Blank-Holding Load on the Drawing Force in the Deep-Drawing Process of Cylindrical and Square Cups

Autori: Lucian Lazarescu, Ioan Nicodim, Dan Sorin Comsa, Dorel Banabic
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 379-384, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.379

Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes

Autori: Lucian Lăzărescu, Ioan Ciobanu, Ioan Pavel Nicodim, Dan Sorin Comşa, Dorel Banabic
Pubblicato in: Key Engineering Materials, Numero 16629795, 2013, Pagina/e 204-209, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.554-557.204

Research on Improving the Outer Surface Quality of the Parts Made by SLM

Autori: Nicolae Bâlc, Sorin Cosmin Cosma, Julia Kessler, Voicu Mager
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 199-204, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.199

Studies Regarding Redesign and Optimization of the Main Shaft of a Naval Winch

Autori: Adina Sarca, Dan Leordean, Cristian Vilău
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 271-279, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.271

Methodology for evaluate the form deviations for formula one nose car

Autori: Paul Bere, Calin Neamtu
Pubblicato in: Open Engineering, Numero 23915439, 2014, Pagina/e 148-154, ISSN 2391-5439
Editore: Walter de Gruyter GmbH & Co. KG
DOI: 10.2478/s13531-013-0158-x

Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling

Autori: Vasile Adrian Ceclan, Paul Bere, Marian Borzan, Sorin Grozav, Cristina Borzan
Pubblicato in: Revista de MATERIALE PLASTICE, Numero Vol. 50, no 2, 2013, Pagina/e 79 - 83, ISSN 0025-5289
Editore: Syscom 18 s.r.l.

The Geometry Equations for Multiple Kinematic Structures Using Direct Geometry

Autori: Calin Beldean, Ioan Vuşcan, Kalman Kacso, Nicolae Panc
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 292-297, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.292

Device for Training of Machine Tool Diagnostic Routines under Various Conditions

Autori: Miroslav Císar, Ivan Kuric, Vasile Adrian Ceclan
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 3-8, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.3

Experimental Research Regarding the Tensile Strength of some Reinforced Composite Materials

Autori: Paul Bere, Adrian Popescu, Liana Livia Hancu
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 131-136, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.131

Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems

Autori: Adrian Coman, Andreas Gebhardt, Carol Patalita, Dănuţ Vasile Leordean
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 250-254, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.250

CNC Machining Of The Complex Copper Electrodes

Autori: Ioan Alexandru Popan, Nicolae Balc, Alina Popan
Pubblicato in: ACTA Universitatis Cibiniensis, Numero 15837149, 2015, Pagina/e 153-158, ISSN 1583-7149
Editore: ACTA UNIVERSITATIS CIBINIENSIS – TECHNICAL SERIES
DOI: 10.1515/aucts-2015-0045

Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM

Autori: Dan Leordean, S. A. Radu, D. Frățilă, P. Berce
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 02683768, 2015, Pagina/e 905-920, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-015-6873-0

The Accuracy of the Plastic Parts Milling Process Executed by a Six Axes Robot

Autori: Alexandru Popan, Nicolae Bâlc, Bogdan Luca, Alina Popan, Alexandru Carean
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 339-344, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.339

Kinematic Process Plastic Cold Orbital Forming

Autori: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Antoniu Turcu, Ovidiu Vasile Oprea
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 98-103, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.98

Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging

Autori: Lucian Lăzărescu, Dorel Banabic
Pubblicato in: Advanced Engineering Forum, Numero 2234991X, 2013, Pagina/e 251-258, ISSN 2234-991X
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.251

Electrochemical and structural investigation on Ti6Al7Nb alloy, coated with hydroxyapatite and titanium dioxide

Autori: Viorica Saplontai, Monica Saplontai, Ioan Roman, Dan Leordean, Roxana Trusca, Tamas Robert Toth, Ileana Cojocaru, Nicolae Balc, Marioara Moldovan
Pubblicato in: CHEMISTRY MAGAZINE, Numero Volume: 65, Numero: 10, 2014, Pagina/e 1249-1252, ISSN 0034-7752
Editore: Syscom 18 s.r.l.

Research Concerning Chalk‘s Influence on Composite-Based Melamine's Compressive Strength

Autori: Liana Livia Hancu, Horatiu Iancau, Paul Bere, Adrian Popescu
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 149-154, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.149

Design and Analyses to Determine the Minimum Acting Force of a Gripper for Handling the Parts with Robots

Autori: Cristian Vilău, Nicolae Bâlc, Dan Leordean
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 264-270, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.264

Researches Regarding the Influence of Cutting Regime on Processed Surface in Aluminum Alloys Turning Process

Autori: Adrian Trif, Marian Borzan, Alexandru Popan, Domniţa Fraţilă, Adriana Rus, Claudiu Nedezki
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 15-20, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.15

Design and Analysis of Carbon/Epoxy Composite Tubular Parts

Autori: Paul Bere, Ovidiu Nemes, Cristian Dudescu, Petru Berce, Emilia Sabau
Pubblicato in: Advanced Engineering Forum, Numero 2234991X, 2013, Pagina/e 207-214, ISSN 2234-991X
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.207

Quality of the Hydroformed Tubular Parts

Autori: Vasile Adrian Ceclan, Nicolae Balc, Sorin Grozav, Paul Bere, Cristina Stefana Borzan
Pubblicato in: Advanced Engineering Forum, Numero 2234991X, 2013, Pagina/e 215-224, ISSN 2234-991X
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.215

Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment

Autori: Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu, Khalid Abd Elghany, Vasile Ceclan, Petru Berce
Pubblicato in: Revista de MATERIALE PLASTICE, Numero Vol 52, no. 1,, 2015, Pagina/e 39 -42, ISSN 0025-5289
Editore: Syscom 18 s.r.l.

Methods for Checking the Symmetry of the Formula One Car Nose

Autori: Călin Neamțu, Paul Bere
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2014, Pagina/e 785-789, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.785

Development of a new procedure for the experimental determination of the Forming Limit Curves

Autori: D. Banabic, L. Lazarescu, L. Paraianu, I. Ciobanu, I. Nicodim, D.S. Comsa
Pubblicato in: CIRP Annals - Manufacturing Technology, Numero 00078506, 2013, Pagina/e 255-258, ISSN 0007-8506
Editore: Hallwag AG
DOI: 10.1016/j.cirp.2013.03.051

Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology

Autori: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak, Nicolae Bâlc
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2014, Pagina/e 231-235, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.231

Mold Design for Polystyrene Plastic Anchor

Autori: Calin Neamtu, Paul Bere, Corina Dobocan, Rares Ghinea, Sergiu Solcan
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 143-148, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.143

Predictive Performances of FLC Using Marciniak-Kuczynski Model and Modified Maximum Force Criterion

Autori: Dorel Banabic, Lucian Lazarescu, Dan Sorin Comsa
Pubblicato in: Key Engineering Materials, Numero 16629795, 2015, Pagina/e 96-101, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.651-653.96

Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations

Autori: Marko Vrh, Miroslav Halilovič, Bojan Starman, Boris Štok, Dan-Sorin Comsa, Dorel Banabic
Pubblicato in: European Journal of Mechanics - A/Solids, Numero 09977538, 2014, Pagina/e 59-74, ISSN 0997-7538
Editore: Elsevier BV
DOI: 10.1016/j.euromechsol.2013.11.013

An evolving plane stress yield criterion based on crystal plasticity virtual experiments

Autori: Jerzy Gawad, Dorel Banabic, Albert Van Bael, Dan Sorin Comsa, Mihai Gologanu, Philip Eyckens, Paul Van Houtte, Dirk Roose
Pubblicato in: International Journal of Plasticity, Numero 07496419, 2015, Pagina/e 141-169, ISSN 0749-6419
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.ijplas.2015.02.011

Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting

Autori: Voicu Mager, Nicolae Bâlc, Dan Leordean, Cristian Dudescu, Mathias Fockele
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 280-284, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.280

Dental follicle stem cells in bone regeneration on titanium implants

Autori: Ondine Lucaciu, Olga Soriţău, Dan Gheban, Dan Rus Ciuca, Oana Virtic, Adriana Vulpoi, Noemi Dirzu, Radu Câmpian, Grigore Băciuţ, Catalin Popa, Simion Simon, Petru Berce, Mihaela Băciuţ, Bogdan Crisan
Pubblicato in: BMC Biotechnology, Numero 14726750, 2015, ISSN 1472-6750
Editore: BioMed Central
DOI: 10.1186/s12896-015-0229-6

Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method

Autori: Razvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc, Anna Petrilak, Ladislav Morovič
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 478-482, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.478

Customized implants with specific properties, made by selective laser melting

Autori: Dan Leordean, Cristian Dudescu, Teodora Marcu, Petru Berce, Nicolae Balc
Pubblicato in: Rapid Prototyping Journal, Numero 13552546, 2015, Pagina/e 98-104, ISSN 1355-2546
Editore: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-11-2012-0107

Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide

Autori: Adrian Popescu, Liana Hancu, Paul Bere
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 394-398, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.394

Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes

Autori: Adrian Coman, Simona Rodean, Dănuţ Vasile Leordean, Carol Patalita
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 188-192, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.188

Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology

Autori: Razvan Păcurar, Ancuţa Păcurar
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2014, Pagina/e 236-240, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.236

Basic Research on Lattice Structures Focused on the Tensile Strength

Autori: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 193-198, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.193

Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding

Autori: Lucian Lazarescu, Ioan Nicodim, Dorel Banabic
Pubblicato in: Key Engineering Materials, Numero 16629795, 2015, Pagina/e 33-40, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.639.33

Surface Roughness Prediction During Dry Turning of Austenitic Stainless Steel AISI 304

Autori: Ioan Alexandru Popan, Nicolae Bâlc, Alina Popan, Domniţa Fraţilă, Adrian Trif
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 54-59, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.54

Using Simulation to Improve the Quality of the Metallic Industrial Components Made by Rapid Casting

Autori: Alina Popan, Nicolae Bâlc, Alexandru Popan, Nicolae Panc, Cristina Stefana Borzan
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 187-192, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.187

How the Crystallization Process in Metal Casting is Influenced by the Mold Filling and Cooling Methods<sup></sup>

Autori: Nicolae Panc, Nicolae Bâlc, Alina Popan
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2015, Pagina/e 92-97, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.92

Research on the durability of injection molding tools made by selective laser sintering technology

Autori: R. Păcurar, P. Berce
Pubblicato in: Proceedings of the Romanian Academy, Numero Vol. 14, no. 3, 2013, Pagina/e 234-241, ISSN 1220-5737
Editore: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Design and Analysis of Carbon/epoxy Composite Bicycle Handlebar

Autori: Bere P., Dudescu M. C., Balc N. , Berce P., Nemes O., Iurian A. M.
Pubblicato in: Revista de MATERIALE PLASTICE, Numero Vol. 51, No. 2, 2014, Pagina/e 145-149, ISSN 0025-5289
Editore: Syscom 18 s.r.l.

Resin type influence on moulded parts final dimensions

Autori: Radu, S.A., Leordean, D., Bâlc, N., Nemeș. O.
Pubblicato in: Studia Universitatis Babes-Bolyai, Chemia, Numero Vol. 60 Numero 2, 2015, Pagina/e 219-228, ISSN 1224-7154
Editore: Universitatea Babes-Bolyai

Maintaining availability through predictive maintenance actions through vibration profile analysis

Autori: Panc N., Kerekes G.
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero Volume 13, Numero 4, 2015, Pagina/e 22-25, ISSN 1583-7904
Editore: Editura Politehnica

Comparative Analysis of Surface Finishing for Different Cutting Strategies of Parts Made from POM C

Autori: Nicolae Panc, Glad Contiu, Vlad Bocanet
Pubblicato in: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Pagina/e 324-332, ISBN 978-3-319-99352-2
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_35

Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions

Autori: Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc, Alina Ioan Popan
Pubblicato in: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Pagina/e 105-113, ISBN 978-3-319-99352-2
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_12

Recycling of Polymeric Composite Materials

Autori: Emilia Sabău
Pubblicato in: Product Lifecycle Management - Terminology and Applications, 2018, ISBN 978-1-78984-542-6
Editore: IntechOpen
DOI: 10.5772/intechopen.81281

Applications of the Selective Laser Melting Technology in the Industrial and Medical Fields

Autori: Razvan Pacurar, Ancut Pacurar
Pubblicato in: New Trends in 3D Printing, 2016, ISBN 978-953-51-2479-5
Editore: InTech
DOI: 10.5772/63038

Chapter 3 “Surface Treatments Applied on Titanium Implants”, Advanced Industrial Engineering - New tendencies in material engineering

Autori: C. Cosma, N. Balc, M. Moldovan, P. Berce
Pubblicato in: 2017, Pagina/e 65-84, ISBN 978-83-949709-2-9
Editore: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 4 Advanced composite materials and applications

Autori: Paul BERE
Pubblicato in: 2017, Pagina/e 34, ISBN 978-83-949709-2-9
Editore: Fundacji Centrum Nowych Technologii

Chapter 2 “Medical Applications of Macro-Porous Structures Additive Manufactured”, Advanced Industrial Engineering - New tendencies in material engineering

Autori: C. Cosma, N. Balc, M. Moldovan, P. Berce
Pubblicato in: 2017, Pagina/e 47-64, ISBN 978-83-949709-2-9
Editore: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 1 Composite Materials

Autori: Paul BERE
Pubblicato in: 2017, Pagina/e 38, ISBN 978-83-949709-2-9
Editore: Fundacji Centrum Nowych Technologii

Sustainable Manufacturing Through Environmentally-Friendly Machining

Autori: Domnita Fratila
Pubblicato in: Green Manufacturing Processes and Systems, 2013, Pagina/e 1-21, ISBN 978-3-642-33792-5
Editore: Springer Berlin Heidelberg
DOI: 10.1007/978-3-642-33792-5_1

An Innovative Procedure for the Experimental Determination of the Forming Limit Curves

Autori: Dorel Banabic, Lucian Lazarescu, Dan-Sorin Comsa
Pubblicato in: 60 Excellent Inventions in Metal Forming, 2015, Pagina/e 11-16, ISBN 978-3-662-46312-3
Editore: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_2

BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes

Autori: Dorel Banabic, Dan-Sorin Comsa
Pubblicato in: 60 Excellent Inventions in Metal Forming, 2015, Pagina/e 49-54, ISBN 978-3-662-46312-3
Editore: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_8

Environmentally friendly Manufacturing Processes in the Context of Transition to Sustainable Production

Autori: D. Fratila
Pubblicato in: Comprehensive Materials Processing, 2014, Pagina/e 163-175, ISBN 9780080965338
Editore: Elsevier
DOI: 10.1016/B978-0-08-096532-1.00815-3

Analysis on the abrasive water-jet milling process on titanium alloys

Autori: Popan I.A., Balc N., Popan, A.I., Carean, A., Ceclan, V.A.
Pubblicato in: International Conference on Production Research - Africa, Europe and the Middle East (ICPR-AEM) / 4th International Conference on Quality and Innovation in Engineering and Management (QIEM), 2016, ISBN 978-606-737-180-2
Editore: UT Press

Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties

Autori: M. Pustan, C. Birleanu, A. Trif, S. Garabagiu, D. Marconi, L. Barbu-Tudoran
Pubblicato in: 2018 International Semiconductor Conference (CAS), 2018, Pagina/e 83-86, ISBN 978-1-5386-4482-9
Editore: IEEE
DOI: 10.1109/smicnd.2018.8539738

Study on manufacturing implants of biocomposite materials by water jet cutting

Autori: Ioan Alexandru Popan, Nicolae Balc and Alina Ioana Popan
Pubblicato in: Proceedings of 7th International Conference on Additive Technologies – ICAT, 2018, Pagina/e 48-50, ISBN 978-961-288-789-6
Editore: Interesansa-zavod, Ljubljana

Design for Additive Manufacturing a Sweat Gland Simulator

Autori: Turcin, C. Cosma, A. Abdallah, N. Balc
Pubblicato in: 7th International Conference on Additive Technologies, 2018
Editore: Maribor

The Mechanism of Deformation Process in Case of Orbital Deformation

Autori: Grozav S.D., Ceclan V.A., Kuric I.
Pubblicato in: International Conference on Quality and Innovation in Engineering and Management, 2016, Pagina/e 489-493, ISBN 978-606-737-180-2
Editore: UTPRESS

Assessing The Value Of 3D Printed Personalised Products

Autori: Abdul Kudus, SI, Campbell, RI, Bibb, R
Pubblicato in: MCP-CE, 2016
Editore: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management

Using acetone (propanone) as a post-production finishing technique: Crossing the divide between art and technology

Autori: Havenga, SP, De Beer, DJ, Van Tonder, PJM, Campbell, RI
Pubblicato in: Conference Papers and Presentations (Design School), 2016, Pagina/e 430-442, ISBN 978-961-281-579-0
Editore: Interesansa - zavod

Arousing Enthusiasm for STEM: Teaching 3D Printing Technology

Autori: A. Gebhardt, L. Thurn
Pubblicato in: Conference Proceedings. New Perspectives in Science Education, Numero 6th Edition, 2017, Pagina/e 87-92, ISBN 978-88-6292-847-2
Editore: Pixel

Analysis on the Abrasive Water-Jet Milling Process on Titanium Alloys

Autori: A. Popan, N. Bâlc, A. I. Popan, A. Cărean, V. A. Ceclan
Pubblicato in: International Conference on Quality and Innovation in Engineering and Management, 2016, ISBN 978-606-737-180-2
Editore: UT Press

Design and manufacturing methodology for F1 nose car

Autori: Bere Paul, Neamtu Calin
Pubblicato in: International Conference on Production Research - Regional Conference Africa, 2014, Pagina/e 21-26, ISBN 978-973-662-978-5
Editore: TECHNICAL UNIV CLUJ-NAPOCA

Improving the design of a wind turbine blade

Autori: Ghinea, R., Bere, P., Neamtu, C.
Pubblicato in: International Conference on Production Research - Regional Conference Africa, 2014, Pagina/e 221-226, ISBN 978-973-662-978-5
Editore: TECHNICAL UNIV CLUJ-NAPOCA

DEVELOPMENT AND TESTING OF MINERAL CASTING FOR USE IN STRUCTURAL ELEMENTS AND MOLD MAKING

Autori: Mihai CIUPAN, Marcel POPA, Ioan Pavel ŞOŞA, Glad CONŢIU, Emilia CIUPAN
Pubblicato in: ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2018, ISSN 1221-5872
Editore: Cluj-Napoca Technical University of Cluj-Napoca

Fabricaţia pieselor din materiale compozite prin procedeul de transfer in matriţă,

Autori: Claudiu Florea, Paul Bere
Pubblicato in: 2017, Pagina/e 256, ISBN 978-606-737-229-8
Editore: UTPRESS

Proiectarea Produselor - Aplicații

Autori: D. Leordean
Pubblicato in: 2018, Pagina/e 117 pagini, ISBN 978-606-737-323-3
Editore: UTPRESS

Aplicatiile medicale ale tehnologiilor de fabricatie prin adaugare de material

Autori: Berce P, Balc N, Chezan H, Leordean D, Mager V, Borzan C, Berce C
Pubblicato in: Editura Academiei Romane, Numero Premiul Academiei Române, Premiul 'Henri Coandă, Ceremonie de decernare: 15 decembrie 2017, 2017, ISBN 978-973-27-2591-7
Editore: Editura Academiei Romane

Fabricaţia materialelor compozite. Materiale, Metode, Aplicaţii

Autori: Paul BERE, Marin GUŢU
Pubblicato in: Editura Tehnică UTM, 2018, Pagina/e 328, ISBN 978-9975-45-538-1
Editore: Universitatea Tehnică a Moldovei

ADVANCED INDUSTRIAL ENGINEERING, NEW TENDENCIES IN MATERIAL ENGINEERING

Autori: Bere Paul
Pubblicato in: 2017, ISBN 978-83-947909-2-9
Editore: Wydawnictwo

Tehnologii neconvenţionale şi de prototipare rapidă

Autori: N. Bâlc, R. Păcurar
Pubblicato in: 2016, Pagina/e 70, ISBN 978-973-53-1792-8
Editore: Risoprint

Modern Technologies in Manufacturing

Autori: Balc Nicolae
Pubblicato in: Applied Mechanics and Materials, 2015, Pagina/e 394, ISBN 978-3-03835-653-0
Editore: Trans Tech Publications

Tehnologii de fabricaţie prin adaugare de material şi aplicaţiile lor

Autori: Berce Petru, Bâlc Nicolae, Păcurar Razvan
Pubblicato in: 2014, Pagina/e 387, ISBN 978-973-27-2396-8
Editore: Editura Academiei Romane

Fabricaţia pieselor metalice prin topire selectivă cu laser, cu aplicabilitate în domeniul industrial

Autori: Păcurar Razvan
Pubblicato in: 2015, Pagina/e 250, ISBN 978-9975-63-382-6
Editore: Editura Tehnică-Info

Proiectarea dispozitivelor-Îndrumător de laborator

Autori: Panc Nicolae, Vușcan Ioan, Păunescu Daniela, Gligor Gheorghe
Pubblicato in: 2014, Pagina/e 128, ISBN 978-973-662-966-2
Editore: Editura UT Press

Fabricaţia implanturilor medicale personalizate prin topire selectivă cu laser – studiu de caz

Autori: R., Păcurar, A. Petrilak
Pubblicato in: 2015, Pagina/e 120, ISBN 9789735316457
Editore: Editura Risoprint

The efficiency of the technologies for low volume production of the dental implants

Autori: Marișca Viorica Saplonțai
Pubblicato in: PhD. Coordinator: Nicolae Balc, 2014
Editore: Technical University of Cluj-Napoca

Materials and methods used for the filters to fix the heavy metals

Autori: Monica Saplonțai
Pubblicato in: PhD. Coordinator: Nicolae Balc, 2014
Editore: Technical University of Cluj-Napoca

Research on selective laser melting manufacturing of the medical implants with composite structures basis

Autori: Voicu Mager
Pubblicato in: PhD. Coordinator: Nicolae Balc, 2014
Editore: Technical University of Cluj-Napoca

Research on developing the water jet cutting process for composite materials machining

Autori: Alin Vasile Miron
Pubblicato in: PhD. Coordinator: Nicolae Balc, 2015
Editore: Technical University of Cluj-Napoca

Research on improving the manufacturing process of the medical implants made by SLM from titanium powder

Autori: Sorin Cosmin Cosma
Pubblicato in: PhD. Coordinator: Nicolae Balc, 2015
Editore: Technical University of Cluj-Napoca

Theoretical and experimental research on using the RP models to manufacture maxilla-facial implants

Autori: Flaviu Horea Chezan
Pubblicato in: PhD. Coordinator: Petru Berce, 2014
Editore: Technical University of Cluj-Napoca

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica