Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca

Informations projet

AMaTUC

N° de convention de subvention: 691787

DOI 10.3030/691787

Projet clôturé

Date de signature de la CE 2 Decembre 2015

Date de début 1 Janvier 2016

Date de fin 31 Decembre 2018

Financé au titre de

• Twinning of research institutions

Coût total € 999 443,75

Contribution de l’UE € 999 443,75

Coordonné par

UNIVERSITATEA TEHNICA CLUJ-NAPOCA
Romania

Livrables

Websites, patent fillings, videos etc. (5)

Project Newsletters - Period 1

1-2 newsletters will be produced per year during project Period 1.

Project leaflet and poster

Support materials to support the promotion of the project consisting in a leaflet (2 pages, A4 size) and a project poster (A1 size)

Project website

The project website will contain the following sections: home, project summary, partners profiles, news and events and project downloads (including the promotional materials, project newsletters and public deliverables). The project website will be implemented in English and Romanian.

Promotion guide about TUCN

Brochure promoting the S&T excellence of TUCN in the field of additive manufacturing. The document will consist in 30+ pages describing TUCN's RDI activities, research capacities, previous national and international projects, list of publications, research interests for further cooperation and significant achievements.

Project Newsletters -Period 2

1-2 newsletters will be produced per year during project Period 2.

Documents, reports (1)

One page statement that Task 4.3 has been completed

List of all publications (in the particular field of research) of the coordinator during the 3 years preceding the start date of the project.

Publications

Peer reviewed articles (133)

Design for Additive Manufacturing, to produce assembled products, by SLS

Auteurs: Nicolae Bâlc, Cristian Vilău
Publié dans: MATEC Web of Conferences, Numéro 121, 2017, Page(s) 04002, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201712104002

Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide

Auteurs: Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu, Olga Hilda Orasan
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 08005, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713708005

Carbon epoxy front hood for an electrical city vehicle

Auteurs: Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes, Sergiu Solcan
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 08001, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713708001

ANALYSIS DISTRIBUTION OF THE EQUIVALENT PLASTIC STRAIN, CONTACT PRESSURE AND TEMPERATURE DURING THE METAL TUBES EXTRUSION

Auteurs: Petru Paul DINCU, Gheorghe ACHIMAȘ, Adriana NEAG and Adrian TRIF
Publié dans: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numéro VOL.16, ISSUE 1, 2018, ISSN 1583-7904
Éditeur: Editura Politehnica

ANALYSIS OF CUTTING FORCES AT DRY AND NEAR-DRY TURNING OF AISI 316L STAINLESS STEEL

Auteurs: Domnița FRĂȚILĂ, Adrian TRIF and Alexandru POPAN
Publié dans: Academic Journal of Manufacturing Engineering, Numéro VOL. 16, ISSUE 4, 2018, Page(s) 19-26, ISSN 1583-7904
Éditeur: Editura Politehnica

Design and manufacturing front hood for electric vehicle by carbon fibber

Auteurs: Paul Bere, Calin Neamtu, Cristian Dudescu
Publié dans: MATEC Web of Conferences, Numéro 112, 2017, Page(s) 07021, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201711207021

Calculation of the contact surface in the orbital deformation of the cylindrical workpiece

Auteurs: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Gabriel Nicodim Ciusca
Publié dans: Acta Technica Napocensis, Series: Applied mathematics, mechanics and engineering, Numéro vol 61 no 4, 2018, Page(s) 695-700, ISSN 1221-5872
Éditeur: UTCN

Analysis and optimization of cutting parameters in drilling operation of EM AW2007 aluminum alloy

Auteurs: Frăţilă, D., Popan, A
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Vol.16 No1, 2018, Page(s) 19-26, ISSN 1583-7904
Éditeur: Editura Politehnica

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3

Auteurs: Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma, Alexandru Carean
Publié dans: MATEC Web of Conferences, Numéro 94, 2017, Page(s) 02011, ISSN 2261-236X
Éditeur: MATEC
DOI: 10.1051/matecconf/20179402011

Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction

Auteurs: Lazar, M.-A., Rotaru, H., Prodan, D, Roman, C.R., Câmpian, R.S. Bere P
Publié dans: Studia Universitatis Babes-Bolyai Chemia, Numéro 61/2, 2016, Page(s) 249-260, ISSN 1224-7154
Éditeur: Universitatea Babes-Bolyai

Evaluation of Surface Modification of PA 2200 Parts Made by Selective Laser Sintering Process

Auteurs: Borzan, Cristina Stefana Miron; Moldovan, Marioara; Bocanet, Vlad
Publié dans: REVISTA DE CHIMIE, Numéro 69, 4, 2018, Page(s) 886-889, ISSN 0034-7752
Éditeur: Syscom 18 s.r.l.

About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants

Auteurs: Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc, Mihaela Suciu
Publié dans: MATEC Web of Conferences, Numéro 178, 2018, Page(s) 04007, ISSN 2261-236X
Éditeur: Matec
DOI: 10.1051/matecconf/201817804007

Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles

Auteurs: Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister, Calin Ciprian Otel
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 01008, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713701008

Post-processing of customized implants made by laser beam melting from pure Titanium

Auteurs: Cosma, N. Balc, M. Moldovan, L. Morovic, P. Gogola, C. Borzan
Publié dans: Journal of Optoelectronics and Advanced Materials, Numéro Vol. 19, No. 11-12, 2017, Page(s) 738-747, ISSN 1454-4164
Éditeur: National Institute of Research and Development for Optoelectronics

Determination of mechanical properties of carbon/epoxy plates by tensile stress test

Auteurs: Paul Bere, Jolanta B. Krolczyk
Publié dans: E3S Web of Conferences, Numéro 19, 2017, Page(s) 03018, ISSN 2267-1242
Éditeur: EDP Sciences
DOI: 10.1051/e3sconf/20171903018

Determination of the force required for the hydroforming of al 99,5

Auteurs: Vasile Ceclan, Sorin Grozav
Publié dans: MATEC Web of Conferences, Numéro 244, 2018, Page(s) 01003, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201824401003

Direct manufacturing of customized implants from biometals, by 3D printing

Auteurs: C. Cosma, N. Balc, P. Berce, A. Popan, A. Cosma, A. Burde
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Vol. 15, No. 4, 2017, Page(s) 42-49, ISSN 1583-7904
Éditeur: Editura Politehnica

Effect of temperature on the mechanical properties of extrusion glass fiber reinforced polyamide 6.6 composites (GFRPA 6.6)

Auteurs: Popescu, A., Hancu, L., Sabau, E
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Volume 61, No.2, 2018, Page(s) 213-218, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

DYNAMIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Auteurs: Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Publié dans: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numéro Vol. 60, Numéro I, 2017, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

Establishing the jacobian matrix for a three degrees of freedom serial structure

Auteurs: Schonstein C., Panc N.
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Volume 61, No. 1, 2018, Page(s) 93-98, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

EVALUATION OF BIODEGRADABLE LUBRICANTS BY FORWARD CONICAL CUP – BACKWARD STRAIGHT CUP EXTRUSION TEST

Auteurs: Alexandru BUCUR, Gheorghe ACHIMAȘ, Lucian LĂZĂRESCU, Adrian TRIF, Grigore Marian POP
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Volume 15, Numéro 3, 2017, Page(s) 43-48, ISSN 1583-7904
Éditeur: Editura Politehnica

Evaluation of the turbocharger center housing flange influence onvibration measurements

Auteurs: Becze S., Vuscan I., Jiang B., Panc N.
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Volume 16, Numéro 2, 2018, Page(s) 114-119, ISSN 1583-7904
Éditeur: Editura Politehnica

Hierarchical modeling of professional skills in the field of castings manufacture engineering

Auteurs: V Samuilă, V F Soporan, G Conțiu, S Pădurețu, T R Lehene, M M Vescan
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 209, 2017, Page(s) 012095, ISSN 1757-8981
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1757-899x/209/1/012095

Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials

Auteurs: Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 01009, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713701009

Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer

Auteurs: Paul Bere, Adrian Popescu, Cristian Dudescu, Liana Hancu
Publié dans: MATEC Web of Conferences, Numéro 112, 2017, Page(s) 04006, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201711204006

Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies

Auteurs: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 02010, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713702010

Influence of milling media on the structure and agglomeration behaviour of some hardmetal powder

Auteurs: H. F. Chicinaş, D. O. Jucan, T. F. Marinca, B. V. Neamțu, G. Conțiu, P. Götze, A. Eckert, C. O. Popa
Publié dans: Powder Metallurgy, Numéro 61/4, 2018, Page(s) 342-347, ISSN 0032-5899
Éditeur: Maney Publishing
DOI: 10.1080/00325899.2018.1476081

Experimental studies on manufacturing of the complex shapes made from copper

Auteurs: Alina Ioana POPAN, Bogdan LUCA, Alexandru CAREAN
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 06005, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713706005

EXPERIMENTAL STUDY OF SURFACE ROUGHNESS IN THE CASE OF TURNING OF FREE-CUTTING STEEL AUT20 (22S20)

Auteurs: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Publié dans: Academic Journal of Manufacturing Engineering, Numéro vol 15, issue 4, 2017, ISSN 1583-7904
Éditeur: Editura Politehnica

Influence of process control agent type on the mechanosynthesis of Fe 3 O 4 particles

Auteurs: H.F. Chicinaş, T.F. Marinca, B.V. Neamțu, G. Conțiu, O. Isnard, I. Chicinaş
Publié dans: Advanced Powder Technology, Numéro 29/8, 2018, Page(s) 1838-1847, ISSN 0921-8831
Éditeur: Elsevier BV
DOI: 10.1016/j.apt.2018.04.020

EXPERIMENTAL STUDY OF THE CUTTING RESULTANT FORCE FROM THE ALUMINIUM ALLOY TURNING PROCESS EN AW 6082

Auteurs: Claudiu Mihai NEDEZKI, Adrian TRIF, Florin BUGNAR
Publié dans: Academic Journal of Manufacturing Engineering, Numéro vol 14, issue 4, 2016, ISSN 1583-7904
Éditeur: Editura Politehnica

Experimental study on manufacturing complex parts from composite materials using water jet cutting

Auteurs: Popan Ioan Alexandru; Popan Alina Ioana
Publié dans: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numéro Vol. 60, Numéro 2, 2017, Page(s) 251-254, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

Experimental study on reverse engineering in case of composite materials cut by water jet cutting

Auteurs: Ioan Alexandru Popan, Nicolae Balc, Alina Popan, Alexandru Carean
Publié dans: MATEC Web of Conferences, Numéro 178, 2018, Page(s) 03004, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201817803004

Geometrical modelling using matrix exponential functions for a serial robot structure

Auteurs: Schonstein C.,Negrea I., Panc N.,
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol 60 (3), 2017, Page(s) 403-408, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

EXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL

Auteurs: Adrian TRIF and Claudiu Mihai NEDEZKI
Publié dans: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numéro VOL. 16, ISSUE 4, 2018, ISSN 1583-7904
Éditeur: Editura Politehnica

Finite element simulation of the C70 orthogonal cutting process

Auteurs: Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conțiu, Marius Bozga
Publié dans: MATEC Web of Conferences, Numéro 112, 2017, Page(s) 06011, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201711206011

EXPERIMENTAL STUDY OF CUTTING PROCESSABILITY USING FACTORY METHODS

Auteurs: Claudiu Mihai NEDEZKI and AdrianTRIF
Publié dans: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numéro VOL. 16, ISSUE 3, 2018, ISSN 1583-7904
Éditeur: Editura Politehnica

Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions

Auteurs: Ioan Turcin, Selver Softic, Udo Traussnigg, Adrian Trif
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 01016, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713701016

Innovative mechanical structure for hospital bed folding using a single actuator

Auteurs: Neamțu C., Popescu, S., Bere P., Comes, R.,
Publié dans: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering, Numéro Vol. 59, 4, 2016, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718

Auteurs: TOMOIAGĂ, Vlad-Bogdan; POPA, Marcel Sabin; CONȚIU, Glad; FAUR, Adrian Sorin; SATTEL, Stefan
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol 61, no 3, 2018, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle

Auteurs: Nelu Pascalau, Ioan Vuscan, Nicolae Panc
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 03010, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713703010

Research on influence of gear honing process on involute helical gears quality

Auteurs: Pascalau N., Vuscan I., Jiang B., Panc N
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Vol 16 no 2, 2018, Page(s) 114-119, ISSN 1583-7904
Éditeur: Editura Politehnica

Low-cost industrial photogrammetry for rapid prototyping

Auteurs: Vlad Bocanet, Marius Bulgaru, Vlad Pop
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 06001, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713706001

Research on Inner Surface of Tubes Hydroformed

Auteurs: Vasile Ceclan, Sorin Grozav, Ivan Kuric
Publié dans: Advances in Science and Technology Research Journal, Numéro 11/4, 2017, Page(s) 311-317, ISSN 2080-4075
Éditeur: Lublin University of Technology
DOI: 10.12913/22998624/80900

Proposal for a composite structure and graphic design for a parking barrier

Auteurs: Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere, Simona Rodean
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 08004, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713708004

PARTICULARITIES OF THE TURNING PROCESS FOR THE TITANIUM ALLOY Ti6Al4V

Auteurs: Adrian TRIF, Claudiu Mihai NEDEZKI, and Florin BUGNAR
Publié dans: Academic Journal of Manufacturing Engineering, Numéro vol 15, issue 2,, 2017, ISSN 1583-7904
Éditeur: Editura Politehnica

Reamers cutting edge preparation for improvement the GGG 40 machining

Auteurs: Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur, Bogdan Luca
Publié dans: MATEC Web of Conferences, Numéro 178, 2018, Page(s) 01014, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201817801014

Mechanical behavior of composite materials using the finite element analysis

Auteurs: Emilia Sabau, Adrian Popescu, Cristian Vilau
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 08006, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713708006

Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting

Auteurs: Ioan Alexandru Popan, Nicolae Bâlc, Alina Ioana Popan
Publié dans: MATEC Web of Conferences, Numéro 121, 2017, Page(s) 02010, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201712102010

RESEARCH REGARDING A REDUCED CONTACT BETWEEN THE FLANKS SURFACE AND THE MATERIAL DURING TAPPING IN ORDER TO INCREASE MACHINING PRODUCTIVITY

Auteurs: Faur, Adrian Sorin; Popa, Marcel Sabin; Contiu, Glad; Tomoiaga, Vlad; Luca, Bogdan Cornel
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol 61 No 3, 2018, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

Kinematical modelling for R2T serial structure used in transfer parts between two workstations

Auteurs: Schonstein C., Panc N.
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol 60, No 3, 2017, Page(s) 409-416, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca

The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation

Auteurs: Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă, Vasile Ceclan
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 05002, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713705002

Theoretical analysis and practical case studies of powder-based additive manufacturing

Auteurs: Cosmin COSMA, Catalin MOLDOVAN, Ian CAMPBELL, Andrei COSMA, Nicolae BALC
Publié dans: Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Numéro Vol. 61, Numéro 3, 2018, Page(s) 369-378, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

The influence of silicon rubber aging on parts obtained in flexible molds

Auteurs: Nicolae PANC, Alina POPAN, Adrian Sever RADU, Adrian POPESCU
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol. 61, Numéro 3, 2018, Page(s) 363-368, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

The design of a plastic injection mold for the part “Tensile Test Specimen”

Auteurs: Morar, C., Popescu, A
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Volume 60, No.2, 2017, Page(s) 319-324, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection

Auteurs: Alexandru Rus, Vasile-Dănuţ Leordean, Petru Berce
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 07007, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713707007

The influence of hole finishing strategies on quality

Auteurs: Vlad Bocanet, Nicolae Panc
Publié dans: MATEC Web of Conferences, Numéro 137, 2017, Page(s) 03001, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201713703001

THE GRAPHICAL SIMULATION OF TRR SMALL-SIZED ROBOT

Auteurs: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Claudiu Mihai NEDEZKI, Adrian TRIF
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol. 59, Numéro 3, 2016, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

STUDIES ON THE CUTTING FORCES IN CASE OF STAINLESS STEEL TURNING OPERATION

Auteurs: Adrian TRIF
Publié dans: Academic Journal of Manufacturing Engineering, Numéro VOL. 16, ISSUE 2, 2018, ISSN 1583-7904
Éditeur: Editura Politehnica

THE KINEMATIC MODEL OF 5R ARTICULATED INDUSTRIAL ROBOT USED IN WELDING PROCESSES

Auteurs: Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Publié dans: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numéro vol 14, issue 4,, 2016, ISSN 1583-7904
Éditeur: Editura Politehnica

The influence of accuracy in establishing the origin of the part on the machining accuracy

Auteurs: Panc N., Schonstein C., Vuscan I.
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol 60 No3, 2017, Page(s) 393-398, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

Studies on designing and testing of a customized medical implant for the maxillofacial area

Auteurs: L. Jozsa, D. Leordean, C. Vilau
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Vol 15 No1, 2017, ISSN 1583-7904
Éditeur: Editura Politehnica

Utilisation of composite materials in the model aircraft construction

Auteurs: George Arghir, BERE Paul
Publié dans: Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, and Engineering,, Numéro Vol 60 Nr. 1,, 2017, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

The mechanical characteristics of composite materials used for the rehabilitation of canals by means of lining

Auteurs: Mocean F, ACHIMAŞ G, BERE P, ACHIMAŞ S.,
Publié dans: Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, And Engineering,, Numéro Vol. 58, No. 1,, 2016, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

THE PATH PLANNING OF TRR SMALL-SIZED ROBOT

Auteurs: Ovidiu-Aurelian DETEŞAN, Florin BUGNAR, Adrian TRIF, Claudiu Mihai NEDEZKI
Publié dans: ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering, Numéro Vol. 59, Numéro 3, 2016, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

The influence of build orientation on the mechanical properties of medical implants made from PA 2200 by Selective Laser Sintering

Auteurs: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak
Publié dans: MATEC Web of Conferences, Numéro 112, 2017, Page(s) 03009, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201711203009

Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method

Auteurs: Razvan Pacurar, Ancuta Pacurar, Serban Pop
Publié dans: MATEC Web of Conferences, Numéro 178, 2018, Page(s) 02009, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201817802009

Theoretical Analysis And Practical Case Studies of SLA, Polyjet and FDM Manufacturing Techniques

Auteurs: C. Moldovan, C. Cosma, P. Berce, N. Balc
Publié dans: ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, Numéro Vol. 61, No 3,, 2018, ISSN 1221-5872
Éditeur: Technical University of Cluj-Napoca,

"Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part ""Body of Spark Plug"""

Auteurs: Călin Ciprian Otel, Razvan Păcurar, Daniel Filip, Monica Steopan, Paul Frîncu
Publié dans: Applied Mechanics and Materials, Numéro 859, 2016, Page(s) 163-169, ISSN 1662-7482
Éditeur: TTP
DOI: 10.4028/www.scientific.net/amm.859.163

Microstructural Analysis of the Interface Between Some Superalloys and Composite/Ceramic Materials

Auteurs: Burde A.V., Cuc S., Radu A., Rusu M.A., Cosma C.S., Câmpian R.S., Leordean D.
Publié dans: Studia Universitatis Babes-Bolyai, Studia Chemia, Numéro LXI, Numéro 2, 2016, Page(s) 205-2014, ISSN 1224-7154
Éditeur: Universitatea Babes-Bolyai

PA 2200 vs. PMMA: Comparison Between the Mechanical Proprieties Obtained for the 2 Biocompatible Materials

Auteurs: Miron Borzan C. S., Dudescu M.C., Ceclan V., Trif A., Ridzon M., Berce P.,
Publié dans: MATERIALE PLASTICE, Numéro Vol. 53, no. 1, 2016, Page(s) 1-5, ISSN 0025-5289
Éditeur: Syscom 18 s.r.l.

Influence of Ti-Ceramic or Ti-Composite crown on stress distribution: finite element study and additive manufacturing

Auteurs: Ispas, A., Cosma, C., Crăciun, A., Constantiniuc, M., Lascu, L., Leordean, D., Vilău, C.
Publié dans: Journal of Optoelectronics and Advanced Materials, Numéro Vol 18 Numéro 9-10, 2016, Page(s) 904-912, ISSN 1454-4164
Éditeur: National Institute of Research and Development for Optoelectronics

Additive manufacturing – a sustainable manufacturing route

Auteurs: Domniţa Frăţilă, Horaţiu Rotaru
Publié dans: MATEC Web of Conferences, Numéro 94, 2017, Page(s) 03004, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/20179403004

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

Auteurs: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Publié dans: MATEC Web of Conferences, Numéro 94, 2017, Page(s) 03008, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/20179403008

Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel

Auteurs: Domnita Fratila
Publié dans: Materials and Manufacturing Processes, Numéro 31/5, 2015, Page(s) 657-666, ISSN 1042-6914
Éditeur: Marcel Dekker Inc.
DOI: 10.1080/10426914.2015.1004708

Basic Research on Lattice Structures Focused on the Strut Shape and Welding Beads

Auteurs: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Publié dans: Physics Procedia, Numéro 83, 2016, Page(s) 833-838, ISSN 1875-3892
Éditeur: ELSEVIER
DOI: 10.1016/j.phpro.2016.08.086

Research on the mechanical behaviour of an airplane component made by selective laser melting technology

Auteurs: Răzvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc
Publié dans: MATEC Web of Conferences, Numéro 94, 2017, Page(s) 03012, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/20179403012

Research of Environment-Friendly Techniques Influence on the Accuracy of Gear Processing in the Context of Sustainable Machining

Auteurs: Frăţilă Domnita
Publié dans: Proceedings of Romanian Academy, Numéro Series A. Volume 14, Number 1, 2013, Page(s) 56 - 63, ISSN 1454-9069
Éditeur: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Selective laser melting of Ti6Al7Nb with hydroxyapatite addition

Auteurs: Teodora Marcu, Cinzia Menapace, Luca Girardini, Dan Leordean, Catalin Popa
Publié dans: Rapid Prototyping Journal, Numéro 13552546, 2014, Page(s) 301-310, ISSN 1355-2546
Éditeur: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-09-2012-0083

Experimental and Theoretic Research Regarding Extrusion Optimization for Reinforced Polyamide (PA 6.6 – 10 % GF)

Auteurs: Adrian Popescu, Liana Livia Hancu, Paul Bere, Cristina Ștefana Miron-Borzan
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 125-130, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.125

Evaluation of Overall Efficiency of Devices with Worm Gear

Auteurs: Alexandru Micaciu, Ioan Vuşcan, Nicolae Panc
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 9-14, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.9

Research on Abrasive Water Jet Milling of the Planar Surfaces, Slots and Profiles

Auteurs: Alexandru Popan, Nicolae Balc, Alexandru Carean, Alina Luca, Alin Miron
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 409-414, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.409

In vivo behavior of surface modified Ti6Al7Nb alloys used in selective laser melting for custom-made implants. A preliminary study

Auteurs: Rotaru, H., Armencea, G., Spîrchez, D., Berce, C., Marcu, T., Leordean, D., Kim, S.-G., Bǎciuţ, M.
Publié dans: ROMANIAN JOURNAL OF MORPHOLOGY AND EMBRYOLOGY, Numéro Vol. 54 - Numéro 3, 2013, Page(s) 791-796, ISSN 1220-0522
Éditeur: Editura Academiei Republicii Socialiste Romania

Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending

Auteurs: Lucian Lăzărescu
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 02683768, 2013, Page(s) 85-91, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-012-3992-8

Research on How Lens Position of the Optical System is Influencing the Mechanical Characteristics of the Metallic Parts Made by Selective Laser Melting Equipment

Auteurs: Razvan Pacurar, Petru Berce
Publié dans: Advanced Engineering Forum, Numéro 2234991X, 2013, Page(s) 285-292, ISSN 2234-991X
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.285

DETERMINATION OF MATERIAL PARAMETERS OF SHEET METALS USING THE HYDRAULIC BULGE TEST

Auteurs: Lucian Lăzărescu, Ioan Nicodim, Ioan Ciobanu, Dan Sorin Comşa, Dorel Banabic
Publié dans: Acta Metallurgica Slovaca, Numéro 13351532, 2013, ISSN 1335-1532
Éditeur: Technicka Univerzita Kosice
DOI: 10.12776/ams.v19i1.81

The Analyses of Working Parameters for a 3D Complex Part Manufacturing by CNC Machine

Auteurs: Vasile Adrian Ceclan, Ioan Alexandru Popan, Sorin Dumitru Grozav, Cristina Ștefana Miron-Borzan, Ivan Kuric
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 286-291, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.286

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE SPRINGBACK ANGLE OF HIGH-STRENGTH STEELS

Auteurs: Jan Slota, Miroslav Jurcisin, Lucian Lazarescu
Publié dans: Acta Metallurgica Slovaca, Numéro 13351532, 2014, ISSN 1335-1532
Éditeur: Technicka Univerzita Kosice
DOI: 10.12776/ams.v20i2.287

Effect of the Blank-Holding Load on the Drawing Force in the Deep-Drawing Process of Cylindrical and Square Cups

Auteurs: Lucian Lazarescu, Ioan Nicodim, Dan Sorin Comsa, Dorel Banabic
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 379-384, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.760.379

Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes

Auteurs: Lucian Lăzărescu, Ioan Ciobanu, Ioan Pavel Nicodim, Dan Sorin Comşa, Dorel Banabic
Publié dans: Key Engineering Materials, Numéro 16629795, 2013, Page(s) 204-209, ISSN 1662-9795
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.554-557.204

Research on Improving the Outer Surface Quality of the Parts Made by SLM

Auteurs: Nicolae Bâlc, Sorin Cosmin Cosma, Julia Kessler, Voicu Mager
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 199-204, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.199

Studies Regarding Redesign and Optimization of the Main Shaft of a Naval Winch

Auteurs: Adina Sarca, Dan Leordean, Cristian Vilău
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 271-279, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.271

Methodology for evaluate the form deviations for formula one nose car

Auteurs: Paul Bere, Calin Neamtu
Publié dans: Open Engineering, Numéro 23915439, 2014, Page(s) 148-154, ISSN 2391-5439
Éditeur: Walter de Gruyter GmbH & Co. KG
DOI: 10.2478/s13531-013-0158-x

Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling

Auteurs: Vasile Adrian Ceclan, Paul Bere, Marian Borzan, Sorin Grozav, Cristina Borzan
Publié dans: Revista de MATERIALE PLASTICE, Numéro Vol. 50, no 2, 2013, Page(s) 79 - 83, ISSN 0025-5289
Éditeur: Syscom 18 s.r.l.

The Geometry Equations for Multiple Kinematic Structures Using Direct Geometry

Auteurs: Calin Beldean, Ioan Vuşcan, Kalman Kacso, Nicolae Panc
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 292-297, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.292

Device for Training of Machine Tool Diagnostic Routines under Various Conditions

Auteurs: Miroslav Císar, Ivan Kuric, Vasile Adrian Ceclan
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 3-8, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.3

Experimental Research Regarding the Tensile Strength of some Reinforced Composite Materials

Auteurs: Paul Bere, Adrian Popescu, Liana Livia Hancu
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 131-136, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.131

Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems

Auteurs: Adrian Coman, Andreas Gebhardt, Carol Patalita, Dănuţ Vasile Leordean
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2013, Page(s) 250-254, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.250

CNC Machining Of The Complex Copper Electrodes

Auteurs: Ioan Alexandru Popan, Nicolae Balc, Alina Popan
Publié dans: ACTA Universitatis Cibiniensis, Numéro 15837149, 2015, Page(s) 153-158, ISSN 1583-7149
Éditeur: ACTA UNIVERSITATIS CIBINIENSIS – TECHNICAL SERIES
DOI: 10.1515/aucts-2015-0045

Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM

Auteurs: Dan Leordean, S. A. Radu, D. Frățilă, P. Berce
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 02683768, 2015, Page(s) 905-920, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-015-6873-0

The Accuracy of the Plastic Parts Milling Process Executed by a Six Axes Robot

Auteurs: Alexandru Popan, Nicolae Bâlc, Bogdan Luca, Alina Popan, Alexandru Carean
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 339-344, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.339

Kinematic Process Plastic Cold Orbital Forming

Auteurs: Sorin Dumitru Grozav, Vasile Adrian Ceclan, Antoniu Turcu, Ovidiu Vasile Oprea
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 98-103, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.98

Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging

Auteurs: Lucian Lăzărescu, Dorel Banabic
Publié dans: Advanced Engineering Forum, Numéro 2234991X, 2013, Page(s) 251-258, ISSN 2234-991X
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.251

Electrochemical and structural investigation on Ti6Al7Nb alloy, coated with hydroxyapatite and titanium dioxide

Auteurs: Viorica Saplontai, Monica Saplontai, Ioan Roman, Dan Leordean, Roxana Trusca, Tamas Robert Toth, Ileana Cojocaru, Nicolae Balc, Marioara Moldovan
Publié dans: CHEMISTRY MAGAZINE, Numéro Volume: 65, Numéro: 10, 2014, Page(s) 1249-1252, ISSN 0034-7752
Éditeur: Syscom 18 s.r.l.

Research Concerning Chalk‘s Influence on Composite-Based Melamine's Compressive Strength

Auteurs: Liana Livia Hancu, Horatiu Iancau, Paul Bere, Adrian Popescu
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 149-154, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.149

Design and Analyses to Determine the Minimum Acting Force of a Gripper for Handling the Parts with Robots

Auteurs: Cristian Vilău, Nicolae Bâlc, Dan Leordean
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 264-270, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.264

Researches Regarding the Influence of Cutting Regime on Processed Surface in Aluminum Alloys Turning Process

Auteurs: Adrian Trif, Marian Borzan, Alexandru Popan, Domniţa Fraţilă, Adriana Rus, Claudiu Nedezki
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 15-20, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.15

Design and Analysis of Carbon/Epoxy Composite Tubular Parts

Auteurs: Paul Bere, Ovidiu Nemes, Cristian Dudescu, Petru Berce, Emilia Sabau
Publié dans: Advanced Engineering Forum, Numéro 2234991X, 2013, Page(s) 207-214, ISSN 2234-991X
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.207

Quality of the Hydroformed Tubular Parts

Auteurs: Vasile Adrian Ceclan, Nicolae Balc, Sorin Grozav, Paul Bere, Cristina Stefana Borzan
Publié dans: Advanced Engineering Forum, Numéro 2234991X, 2013, Page(s) 215-224, ISSN 2234-991X
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AEF.8-9.215

Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment

Auteurs: Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu, Khalid Abd Elghany, Vasile Ceclan, Petru Berce
Publié dans: Revista de MATERIALE PLASTICE, Numéro Vol 52, no. 1,, 2015, Page(s) 39 -42, ISSN 0025-5289
Éditeur: Syscom 18 s.r.l.

Methods for Checking the Symmetry of the Formula One Car Nose

Auteurs: Călin Neamțu, Paul Bere
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2014, Page(s) 785-789, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.785

Development of a new procedure for the experimental determination of the Forming Limit Curves

Auteurs: D. Banabic, L. Lazarescu, L. Paraianu, I. Ciobanu, I. Nicodim, D.S. Comsa
Publié dans: CIRP Annals - Manufacturing Technology, Numéro 00078506, 2013, Page(s) 255-258, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2013.03.051

Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology

Auteurs: Răzvan Păcurar, Ancuţa Păcurar, Anna Petrilak, Nicolae Bâlc
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2014, Page(s) 231-235, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.231

Mold Design for Polystyrene Plastic Anchor

Auteurs: Calin Neamtu, Paul Bere, Corina Dobocan, Rares Ghinea, Sergiu Solcan
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 143-148, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.143

Predictive Performances of FLC Using Marciniak-Kuczynski Model and Modified Maximum Force Criterion

Auteurs: Dorel Banabic, Lucian Lazarescu, Dan Sorin Comsa
Publié dans: Key Engineering Materials, Numéro 16629795, 2015, Page(s) 96-101, ISSN 1662-9795
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.651-653.96

Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations

Auteurs: Marko Vrh, Miroslav Halilovič, Bojan Starman, Boris Štok, Dan-Sorin Comsa, Dorel Banabic
Publié dans: European Journal of Mechanics - A/Solids, Numéro 09977538, 2014, Page(s) 59-74, ISSN 0997-7538
Éditeur: Elsevier BV
DOI: 10.1016/j.euromechsol.2013.11.013

An evolving plane stress yield criterion based on crystal plasticity virtual experiments

Auteurs: Jerzy Gawad, Dorel Banabic, Albert Van Bael, Dan Sorin Comsa, Mihai Gologanu, Philip Eyckens, Paul Van Houtte, Dirk Roose
Publié dans: International Journal of Plasticity, Numéro 07496419, 2015, Page(s) 141-169, ISSN 0749-6419
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijplas.2015.02.011

Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting

Auteurs: Voicu Mager, Nicolae Bâlc, Dan Leordean, Cristian Dudescu, Mathias Fockele
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2013, Page(s) 280-284, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.280

Dental follicle stem cells in bone regeneration on titanium implants

Auteurs: Ondine Lucaciu, Olga Soriţău, Dan Gheban, Dan Rus Ciuca, Oana Virtic, Adriana Vulpoi, Noemi Dirzu, Radu Câmpian, Grigore Băciuţ, Catalin Popa, Simion Simon, Petru Berce, Mihaela Băciuţ, Bogdan Crisan
Publié dans: BMC Biotechnology, Numéro 14726750, 2015, ISSN 1472-6750
Éditeur: BioMed Central
DOI: 10.1186/s12896-015-0229-6

Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method

Auteurs: Razvan Păcurar, Ancuţa Păcurar, Nicolae Bâlc, Anna Petrilak, Ladislav Morovič
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2013, Page(s) 478-482, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.478

Customized implants with specific properties, made by selective laser melting

Auteurs: Dan Leordean, Cristian Dudescu, Teodora Marcu, Petru Berce, Nicolae Balc
Publié dans: Rapid Prototyping Journal, Numéro 13552546, 2015, Page(s) 98-104, ISSN 1355-2546
Éditeur: Emerald Group Publishing Ltd.
DOI: 10.1108/RPJ-11-2012-0107

Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide

Auteurs: Adrian Popescu, Liana Hancu, Paul Bere
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2013, Page(s) 394-398, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.394

Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes

Auteurs: Adrian Coman, Simona Rodean, Dănuţ Vasile Leordean, Carol Patalita
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2013, Page(s) 188-192, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.371.188

Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology

Auteurs: Razvan Păcurar, Ancuţa Păcurar
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2014, Page(s) 236-240, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.657.236

Basic Research on Lattice Structures Focused on the Tensile Strength

Auteurs: Julia Kessler, Nicolae Bâlc, Andreas Gebhardt, Karim Abbas
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 193-198, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.193

Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding

Auteurs: Lucian Lazarescu, Ioan Nicodim, Dorel Banabic
Publié dans: Key Engineering Materials, Numéro 16629795, 2015, Page(s) 33-40, ISSN 1662-9795
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.639.33

Surface Roughness Prediction During Dry Turning of Austenitic Stainless Steel AISI 304

Auteurs: Ioan Alexandru Popan, Nicolae Bâlc, Alina Popan, Domniţa Fraţilă, Adrian Trif
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 54-59, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.54

Using Simulation to Improve the Quality of the Metallic Industrial Components Made by Rapid Casting

Auteurs: Alina Popan, Nicolae Bâlc, Alexandru Popan, Nicolae Panc, Cristina Stefana Borzan
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 187-192, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.187

How the Crystallization Process in Metal Casting is Influenced by the Mold Filling and Cooling Methods

Auteurs: Nicolae Panc, Nicolae Bâlc, Alina Popan
Publié dans: Applied Mechanics and Materials, Numéro 16627482, 2015, Page(s) 92-97, ISSN 1662-7482
Éditeur: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.808.92

Research on the durability of injection molding tools made by selective laser sintering technology

Auteurs: R. Păcurar, P. Berce
Publié dans: Proceedings of the Romanian Academy, Numéro Vol. 14, no. 3, 2013, Page(s) 234-241, ISSN 1220-5737
Éditeur: THE PUBLISHING HOUSE OF THE ROMANIAN ACADEMY

Design and Analysis of Carbon/epoxy Composite Bicycle Handlebar

Auteurs: Bere P., Dudescu M. C., Balc N. , Berce P., Nemes O., Iurian A. M.
Publié dans: Revista de MATERIALE PLASTICE, Numéro Vol. 51, No. 2, 2014, Page(s) 145-149, ISSN 0025-5289
Éditeur: Syscom 18 s.r.l.

Resin type influence on moulded parts final dimensions

Auteurs: Radu, S.A., Leordean, D., Bâlc, N., Nemeș. O.
Publié dans: Studia Universitatis Babes-Bolyai, Chemia, Numéro Vol. 60 Numéro 2, 2015, Page(s) 219-228, ISSN 1224-7154
Éditeur: Universitatea Babes-Bolyai

Maintaining availability through predictive maintenance actions through vibration profile analysis

Auteurs: Panc N., Kerekes G.
Publié dans: Academic Journal of Manufacturing Engineering, Numéro Volume 13, Numéro 4, 2015, Page(s) 22-25, ISSN 1583-7904
Éditeur: Editura Politehnica

Book chapters (12)

Comparative Analysis of Surface Finishing for Different Cutting Strategies of Parts Made from POM C

Auteurs: Nicolae Panc, Glad Contiu, Vlad Bocanet
Publié dans: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Page(s) 324-332, ISBN 978-3-319-99352-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_35

Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions

Auteurs: Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc, Alina Ioan Popan
Publié dans: Advances in Manufacturing Engineering and Materials - Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, 2019, Page(s) 105-113, ISBN 978-3-319-99352-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-99353-9_12

Recycling of Polymeric Composite Materials

Auteurs: Emilia Sabău
Publié dans: Product Lifecycle Management - Terminology and Applications, 2018, ISBN 978-1-78984-542-6
Éditeur: IntechOpen
DOI: 10.5772/intechopen.81281

Applications of the Selective Laser Melting Technology in the Industrial and Medical Fields

Auteurs: Razvan Pacurar, Ancut Pacurar
Publié dans: New Trends in 3D Printing, 2016, ISBN 978-953-51-2479-5
Éditeur: InTech
DOI: 10.5772/63038

Chapter 3 “Surface Treatments Applied on Titanium Implants”, Advanced Industrial Engineering - New tendencies in material engineering

Auteurs: C. Cosma, N. Balc, M. Moldovan, P. Berce
Publié dans: 2017, Page(s) 65-84, ISBN 978-83-949709-2-9
Éditeur: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 4 Advanced composite materials and applications

Auteurs: Paul BERE
Publié dans: 2017, Page(s) 34, ISBN 978-83-949709-2-9
Éditeur: Fundacji Centrum Nowych Technologii

Chapter 2 “Medical Applications of Macro-Porous Structures Additive Manufactured”, Advanced Industrial Engineering - New tendencies in material engineering

Auteurs: C. Cosma, N. Balc, M. Moldovan, P. Berce
Publié dans: 2017, Page(s) 47-64, ISBN 978-83-949709-2-9
Éditeur: Wydawnictwo Fundacji Centrum Nowych Technologii

Cap. 1 Composite Materials

Auteurs: Paul BERE
Publié dans: 2017, Page(s) 38, ISBN 978-83-949709-2-9
Éditeur: Fundacji Centrum Nowych Technologii

Sustainable Manufacturing Through Environmentally-Friendly Machining

Auteurs: Domnita Fratila
Publié dans: Green Manufacturing Processes and Systems, 2013, Page(s) 1-21, ISBN 978-3-642-33792-5
Éditeur: Springer Berlin Heidelberg
DOI: 10.1007/978-3-642-33792-5_1

An Innovative Procedure for the Experimental Determination of the Forming Limit Curves

Auteurs: Dorel Banabic, Lucian Lazarescu, Dan-Sorin Comsa
Publié dans: 60 Excellent Inventions in Metal Forming, 2015, Page(s) 11-16, ISBN 978-3-662-46312-3
Éditeur: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_2

BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes

Auteurs: Dorel Banabic, Dan-Sorin Comsa
Publié dans: 60 Excellent Inventions in Metal Forming, 2015, Page(s) 49-54, ISBN 978-3-662-46312-3
Éditeur: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-46312-3_8

Environmentally friendly Manufacturing Processes in the Context of Transition to Sustainable Production

Auteurs: D. Fratila
Publié dans: Comprehensive Materials Processing, 2014, Page(s) 163-175, ISBN 9780080965338
Éditeur: Elsevier
DOI: 10.1016/B978-0-08-096532-1.00815-3

Conference proceedings (11)

Analysis on the abrasive water-jet milling process on titanium alloys

Auteurs: Popan I.A., Balc N., Popan, A.I., Carean, A., Ceclan, V.A.
Publié dans: International Conference on Production Research - Africa, Europe and the Middle East (ICPR-AEM) / 4th International Conference on Quality and Innovation in Engineering and Management (QIEM), 2016, ISBN 978-606-737-180-2
Éditeur: UT Press

Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties

Auteurs: M. Pustan, C. Birleanu, A. Trif, S. Garabagiu, D. Marconi, L. Barbu-Tudoran
Publié dans: 2018 International Semiconductor Conference (CAS), 2018, Page(s) 83-86, ISBN 978-1-5386-4482-9
Éditeur: IEEE
DOI: 10.1109/smicnd.2018.8539738

Study on manufacturing implants of biocomposite materials by water jet cutting

Auteurs: Ioan Alexandru Popan, Nicolae Balc and Alina Ioana Popan
Publié dans: Proceedings of 7th International Conference on Additive Technologies – ICAT, 2018, Page(s) 48-50, ISBN 978-961-288-789-6
Éditeur: Interesansa-zavod, Ljubljana

Design for Additive Manufacturing a Sweat Gland Simulator

Auteurs: Turcin, C. Cosma, A. Abdallah, N. Balc
Publié dans: 7th International Conference on Additive Technologies, 2018
Éditeur: Maribor

The Mechanism of Deformation Process in Case of Orbital Deformation

Auteurs: Grozav S.D., Ceclan V.A., Kuric I.
Publié dans: International Conference on Quality and Innovation in Engineering and Management, 2016, Page(s) 489-493, ISBN 978-606-737-180-2
Éditeur: UTPRESS

Assessing The Value Of 3D Printed Personalised Products

Auteurs: Abdul Kudus, SI, Campbell, RI, Bibb, R
Publié dans: MCP-CE, 2016
Éditeur: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management

Using acetone (propanone) as a post-production finishing technique: Crossing the divide between art and technology

Auteurs: Havenga, SP, De Beer, DJ, Van Tonder, PJM, Campbell, RI
Publié dans: Conference Papers and Presentations (Design School), 2016, Page(s) 430-442, ISBN 978-961-281-579-0
Éditeur: Interesansa - zavod

Arousing Enthusiasm for STEM: Teaching 3D Printing Technology

Auteurs: A. Gebhardt, L. Thurn
Publié dans: Conference Proceedings. New Perspectives in Science Education, Numéro 6th Edition, 2017, Page(s) 87-92, ISBN 978-88-6292-847-2
Éditeur: Pixel

Analysis on the Abrasive Water-Jet Milling Process on Titanium Alloys

Auteurs: A. Popan, N. Bâlc, A. I. Popan, A. Cărean, V. A. Ceclan
Publié dans: International Conference on Quality and Innovation in Engineering and Management, 2016, ISBN 978-606-737-180-2
Éditeur: UT Press

Design and manufacturing methodology for F1 nose car

Auteurs: Bere Paul, Neamtu Calin
Publié dans: International Conference on Production Research - Regional Conference Africa, 2014, Page(s) 21-26, ISBN 978-973-662-978-5
Éditeur: TECHNICAL UNIV CLUJ-NAPOCA

Improving the design of a wind turbine blade

Auteurs: Ghinea, R., Bere, P., Neamtu, C.
Publié dans: International Conference on Production Research - Regional Conference Africa, 2014, Page(s) 221-226, ISBN 978-973-662-978-5
Éditeur: TECHNICAL UNIV CLUJ-NAPOCA

Non-peer reviewed articles (1)

DEVELOPMENT AND TESTING OF MINERAL CASTING FOR USE IN STRUCTURAL ELEMENTS AND MOLD MAKING

Auteurs: Mihai CIUPAN, Marcel POPA, Ioan Pavel ŞOŞA, Glad CONŢIU, Emilia CIUPAN
Publié dans: ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2018, ISSN 1221-5872
Éditeur: Cluj-Napoca Technical University of Cluj-Napoca

Monographic books (11)

Fabricaţia pieselor din materiale compozite prin procedeul de transfer in matriţă,

Auteurs: Claudiu Florea, Paul Bere
Publié dans: 2017, Page(s) 256, ISBN 978-606-737-229-8
Éditeur: UTPRESS

Proiectarea Produselor - Aplicații

Auteurs: D. Leordean
Publié dans: 2018, Page(s) 117 pagini, ISBN 978-606-737-323-3
Éditeur: UTPRESS

Aplicatiile medicale ale tehnologiilor de fabricatie prin adaugare de material

Auteurs: Berce P, Balc N, Chezan H, Leordean D, Mager V, Borzan C, Berce C
Publié dans: Editura Academiei Romane, Numéro Premiul Academiei Române, Premiul 'Henri Coandă, Ceremonie de decernare: 15 decembrie 2017, 2017, ISBN 978-973-27-2591-7
Éditeur: Editura Academiei Romane

Fabricaţia materialelor compozite. Materiale, Metode, Aplicaţii

Auteurs: Paul BERE, Marin GUŢU
Publié dans: Editura Tehnică UTM, 2018, Page(s) 328, ISBN 978-9975-45-538-1
Éditeur: Universitatea Tehnică a Moldovei

ADVANCED INDUSTRIAL ENGINEERING, NEW TENDENCIES IN MATERIAL ENGINEERING

Auteurs: Bere Paul
Publié dans: 2017, ISBN 978-83-947909-2-9
Éditeur: Wydawnictwo

Tehnologii neconvenţionale şi de prototipare rapidă

Auteurs: N. Bâlc, R. Păcurar
Publié dans: 2016, Page(s) 70, ISBN 978-973-53-1792-8
Éditeur: Risoprint

Modern Technologies in Manufacturing

Auteurs: Balc Nicolae
Publié dans: Applied Mechanics and Materials, 2015, Page(s) 394, ISBN 978-3-03835-653-0
Éditeur: Trans Tech Publications

Tehnologii de fabricaţie prin adaugare de material şi aplicaţiile lor

Auteurs: Berce Petru, Bâlc Nicolae, Păcurar Razvan
Publié dans: 2014, Page(s) 387, ISBN 978-973-27-2396-8
Éditeur: Editura Academiei Romane

Fabricaţia pieselor metalice prin topire selectivă cu laser, cu aplicabilitate în domeniul industrial

Auteurs: Păcurar Razvan
Publié dans: 2015, Page(s) 250, ISBN 978-9975-63-382-6
Éditeur: Editura Tehnică-Info

Proiectarea dispozitivelor-Îndrumător de laborator

Auteurs: Panc Nicolae, Vușcan Ioan, Păunescu Daniela, Gligor Gheorghe
Publié dans: 2014, Page(s) 128, ISBN 978-973-662-966-2
Éditeur: Editura UT Press

Fabricaţia implanturilor medicale personalizate prin topire selectivă cu laser – studiu de caz

Auteurs: R., Păcurar, A. Petrilak
Publié dans: 2015, Page(s) 120, ISBN 9789735316457
Éditeur: Editura Risoprint

Thesis and dissertations (6)

The efficiency of the technologies for low volume production of the dental implants

Auteurs: Marișca Viorica Saplonțai
Publié dans: PhD. Coordinator: Nicolae Balc, 2014
Éditeur: Technical University of Cluj-Napoca

Materials and methods used for the filters to fix the heavy metals

Auteurs: Monica Saplonțai
Publié dans: PhD. Coordinator: Nicolae Balc, 2014
Éditeur: Technical University of Cluj-Napoca

Research on selective laser melting manufacturing of the medical implants with composite structures basis

Auteurs: Voicu Mager
Publié dans: PhD. Coordinator: Nicolae Balc, 2014
Éditeur: Technical University of Cluj-Napoca

Research on developing the water jet cutting process for composite materials machining

Auteurs: Alin Vasile Miron
Publié dans: PhD. Coordinator: Nicolae Balc, 2015
Éditeur: Technical University of Cluj-Napoca

Research on improving the manufacturing process of the medical implants made by SLM from titanium powder

Auteurs: Sorin Cosmin Cosma
Publié dans: PhD. Coordinator: Nicolae Balc, 2015
Éditeur: Technical University of Cluj-Napoca

Theoretical and experimental research on using the RP models to manufacture maxilla-facial implants

Auteurs: Flaviu Horea Chezan
Publié dans: PhD. Coordinator: Petru Berce, 2014
Éditeur: Technical University of Cluj-Napoca