Correlative tomography

Pubblicazioni

The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel

Autori: Wen Zhang; Chris Simpson; Thomas Leitner; Thomas Leitner; Xun Zhang; Reinhard Pippan; Reinhard Pippan; Philip J. Withers
Pubblicato in: Acta Materialia, Numero 2, 2020, Pagina/e 225-240, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2019.11.024

Realization of 3D epoxy resin/Ti3C2Tx MXene aerogel composites for low-voltage electrothermal heating,

Autori: P. Yang et al
Pubblicato in: 2d Materials, 2021, Pagina/e vol. 8, no. 2, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1088/2053-1583/abda0f

The effect of grain size on the fatigue overload behaviour of nicke

Autori: W. Zhang et al
Pubblicato in: Materials & Design, 2020, Pagina/e vol. 189, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2020.108526

X-ray computed tomography

Autori: P. J. Withers et al
Pubblicato in: Nature Reviews Methods Primers, 2021, Pagina/e vol. 1, no. 1, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s43586-021-00015-4

Damage accumulation during high temperature fatigue of Ti/SiCf metal matrix composites under different stress amplitudes

Autori: Y. Wang et al
Pubblicato in: Acta Materialia, 2021, Pagina/e vol. 213, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2021.116976

"Degradation of metallic materials studied by correlative tomography,"" IOP Conference Series"

Autori: T. L. Burnett et al
Pubblicato in: Materials Science and Engineering, 2017, Pagina/e vol. 219, no. 1, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1088/1757-899X/219/1/012001

In-situ synchrotron X-ray tomography investigation of damage mechanism of an extruded magnesium alloy in uniaxial low-cycle fatigue with ratchetting

Autori: Z. Y. Wang et al.
Pubblicato in: Acta Materialia, 2021, Pagina/e vol. 211, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2021.116881

A machine-learning fatigue life prediction approach of additively manufactured metals

Autori: H. Bao, S. Wu, Z. Wu, G. Kang, X. Peng, and P. J. Withers
Pubblicato in: Engineering Fracture Mechanics, 2021, Pagina/e ol. 242, p. 107508, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.engfracmech.2020.107508

Embedded 3D printing of Multi-material composites

Autori: S. Zhou et al
Pubblicato in: Submitted to Nature Comms, 2023, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.21203/rs.3.rs-2151613/v1

Comparing Xe+pFIB and Ga+FIB for TEM sample preparation of Al alloys: Minimising FIB-induced artefacts

Autori: Xiangli Zhong; C. Austin Wade; Philip J. Withers; Xiaorong Zhou; Changrun Cai; Sarah J. Haigh; M. Grace Burke
Pubblicato in: Journal of Microscopy, Numero 282, 2021, Pagina/e 2, ISSN 0022-2720
Editore: Blackwell Publishing Inc.
DOI: 10.1111/jmi.12983

Morphological variability in the mucosal attachment site of Trichuris muris revealed by X-ray microcomputed tomography,

Autori: O'Sullivan, J.D.B., S.M. Cruickshank, P.J. Withers and K.J.
Pubblicato in: International Journal of Plasticity, 2021, Pagina/e vol. 143, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijpara.2021.04.006

Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)

Autori: S. A. McDonald, C. Holzner, E. M. Lauridsen, P. Reischig, A. P. Merkle, and P. J. Withers
Pubblicato in: Scientific Reports, 2017, Pagina/e vol. 7, p. 5251, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-017-04742-1

Corrosion fatigue lifetime assessment of high-speed railway axle EA4T steel with artificial scratch

Autori: Y. Hu et al
Pubblicato in: Engineering Fracture Mechanics, 2021, Pagina/e vol. 245, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.engfracmech.2021.107588

MXene Tunable Lamellae Architectures for Supercapacitor Electrodes

Autori: V. Bayram et al
Pubblicato in: Acs Applied Energy Materials, 2020, Pagina/e vol. 3, no. 1, pp. 411-422, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1021/acsaem.9b01654

Determination of local residual stress in an air plasma spray thermal barrier coating (APS-TBC) by microscale ring coring using a picosecond laser

Autori: X. Zhang, C. Li, P. J. Withers, N. Markocsan, and P. Xiao
Pubblicato in: Scripta Materialia, 2019, Pagina/e vol. 167, pp. 126-130, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.scriptamat.2019.03.036

Macro-, meso- and microstructural characterization of metallic lattice structures manufactured by additive manufacturing assisted investment casting

Autori: V. H. Carneiro, S. D. Rawson, H. Puga, and P. J. Withers
Pubblicato in: Scientific Reports, 2021, Pagina/e vol. 11, no. 1, p. 4974, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-021-84524-y

Fine equiaxed zone induced softening and failure behavior of 7050 aluminum alloy hybrid laser welds

Autori: Y. A. Hu, S. C. A. Wu, Z. Shen, H. T. Cao, X. L. Zhong, and P. J. Withers
Pubblicato in: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2021, Pagina/e vol. 821, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.msea.2021.141597

Crystalline phase discriminating neutron tomography using advanced reconstruction methods

Autori: Evelina Ametova; Genoveva Burca; Suren Chilingaryan; Gemma Fardell; Jakob Sauer Jørgensen; Evangelos Papoutsellis; Edoardo Pasca; Ryan Warr; Martin Turner; William R. B. Lionheart; Philip J. Withers
Pubblicato in: Ametova , E , Burca , G , Chilingaryan , S , Fardell , G , Jørgensen , J S , Papoutsellis , E , Pasca , E , Warr , R , Turner , M , Lionheart , W R B & Withers , P J 2021 , ' Crystalline phase discriminating neutron tomography using advanced reconstruction methods ' , Journal of Physics D: Applied Physics , vol. 54 , no. 32 , 325502 . https://doi.org/10.1088/1361-6463/ac02f9, Numero 5, 2021, Pagina/e 325502, ISSN 0022-3727
Editore: Institute of Physics Publishing
DOI: 10.48550/arxiv.2102.06706

Depth-profiling of residual stress and microstructure for austenitic stainless steel surface treated by cavitation, shot and laser peening

Autori: M. Kumagai, M. E. Curd, H. Soyama, T. Ungar, G. Ribarik, and P. J. Withers
Pubblicato in: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2021, Pagina/e vol. 813, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.msea.2021.141037

A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy

Autori: Y. N. Hu et al
Pubblicato in: International Journal of Fatigue, 2020, Pagina/e vol. 136, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105584

Correction of artefacts associated with large area EBSD,

Autori: B. Winiarski, A. Gholinia, K. Mingard, M. Gee, G. Thompson, and P. J. Withers
Pubblicato in: Ultramicroscopy, 2021, Pagina/e vol. 226, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ultramic.2021.113315

Tracking polycrystal evolution non-destructively in 3D by laboratory X-ray diffraction contrast tomography

Autori: S. A. McDonald et al
Pubblicato in: Materials Characterization, 2021, Pagina/e vol. 172, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matchar.2020.110814

Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V components

Autori: Leung, Chu Lun Alex Tosi, Riccardo Muzangaza, Emmanuel Nonni, Sara Withers, Philip J. Lee, Peter D.
Pubblicato in: Materials & Design, 2019, Pagina/e 107792, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2019.107792

Tracking capsule activation and crack healing in a microcapsule-based self-healing polymer,

Autori: S. A. McDonald, S. B. Coban, N. R. Sottos, and P. J. Withers
Pubblicato in: Scientific Reports, 2019, Pagina/e vol. 9, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-019-54242-7

Rich multi-dimensional correlative imaging

Autori: P. J. Withers and T. L. Burnett
Pubblicato in: IOP Conference Series: Materials Science and Engineering, 2019, Pagina/e vol. 580, p. 012014, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1088/1757-899x/580/1/012014

Mapping Plastic Deformation Mechanisms in AZ31 Magnesium Alloy at the Nanoscale

Autori: B. Yavuzyegit et al
Pubblicato in: Acta Mater, 2023, Pagina/e vol. Submitted, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2022.111179

Generation of high-fidelity random fields from micro CT images and phase field-based mesoscale fracture modelling of concrete,

Autori: Y.-j. Huang, H. Zhang, B.-b. Li, Z.-j. Yang, J.-y. Wu, and P. J. Withers
Pubblicato in: Engineering Fracture Mechanics, 2021, Pagina/e vol. 249, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.engfracmech.2021.107762

In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy

Autori: W. Qian et al
Pubblicato in: International Journal of Fatigue, 2022, Pagina/e vol. 155, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106616

Tracking the calcium-magnesium-alumino-silicate (CMAS) infiltration into an air-plasma spray thermal barrier coating using X-ray imaging

Autori: Xun Zhang; Xiao Shan; Philip J. Withers; Xiaofeng Zhao; Ping Xiao
Pubblicato in: Zhang , X , Shan , X , Withers , P , Zhao , X & Xiao , P 2020 , ' Tracking the Calcium Magnesium-Alumino-Silicate (CMAS) Infiltration into an Air-Plasma Spray Thermal Barrier Coating using X-ray Imaging ' , Scripta Materialia , vol. 176 , pp. 94-98 . https://doi.org/10.1016/j.scriptamat.2019.09.016, Numero 3, 2020, Pagina/e 94-98, ISSN 1359-6462
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2019.09.016

Environmentally induced crack (EIC) initiation, propagation, and failure: A 3D in-situ time-lapse study of AA5083 H131

Autori: V. C. Gudla et al
Pubblicato in: Corrosion Science, 2020, Pagina/e vol. 174, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.corsci.2020.108834

Quantifying multiple stain distributions in bioimaging by hyperspectral X-ray tomography

Autori: R. Warr, S. Handschuh, M. Glösmann, R. J. Cernik, and P. J. Withers
Pubblicato in: Scientific Reports, 2022, Pagina/e vol. 12, no. 1, p. 21945, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-022-23592-0

A Conformable High Temperature Nitride Coating for Ti Alloys

Autori: Zhaohe Gao; Zhenbo Zhang; Xun Zhang; Justyna Kulczyk-Malecka; H. Liu; Peter Kelly; Philip J. Withers; Ping Xiao
Pubblicato in: Acta Materialia, Numero 1, 2020, Pagina/e 274-283, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2020.02.051

Additive manufacturing assisted investment casting: A low-cost method to fabricate periodic metallic cellular lattices

Autori: V. H. Carneiro, S. D. Rawson, H. Puga, J. Meireles, and P. J. Withers
Pubblicato in: Additive Manufacturing, 2020, Pagina/e vol. 33,, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.addma.2020.101085

X-ray computed tomography in life sciences

Autori: S. D. Rawson, J. Maksimcuka, P. J. Withers, and S. H. Cartmell
Pubblicato in: BMC Biology, 2020, Pagina/e vol. 18, no. 1, p. 21, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1186/s12915-020-0753-2

The potency of defects on fatigue of additively manufactured metals

Autori: X. Peng et al
Pubblicato in: International Journal of Mechanical Sciences, 2022, Pagina/e vol. 221, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijmecsci.2022.107185

High temperature oxidation and its effect on the mechanical behaviour of SiCf/BN/SiBCN composites

Autori: Z. Li et al
Pubblicato in: in European Conference on Composite Materials (ECCM18), Athends Greece, 2018, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2020.08.057

The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures,

Autori: Y. N. Hu et al
Pubblicato in: Materials & Design, Numero vol. 192, 2020, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2020.108708

Novel Methods for Recording Stress-Strain Curves in Proton Irradiated Material

Autori: A. D. Smith et al
Pubblicato in: Scientific Reports, 2020, Pagina/e vol. 10, no. 1, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-020-62241-2

Coupled Broad Ion Beam-Scanning Electron Microscopy (BIB-SEM) for polishing and three dimensional (3D) serial section tomography (SST)

Autori: A. Gholinia et al
Pubblicato in: Ultramicroscopy, Numero 10.1016/j.ultramic.2020.112989, 2020, Pagina/e vol. 214, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ultramic.2020.112989

Core Imaging Library-Part II: multichannel reconstruction for dynamic and spectral tomography

Autori: E. Papoutsellis et al
Pubblicato in: Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, 2021, Pagina/e vol. 379, no. 2204, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1098/rsta.2020.0193

X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting

Autori: Everth Hernández-Nava, Samuel Tammas-Williams, Christopher Smith, Fabien Leonard, Philip Withers, Iain Todd, Russell Goodall
Pubblicato in: Metals, Numero 7/8, 2017, Pagina/e 300, ISSN 2075-4701
Editore: MDPI AG
DOI: 10.3390/met7080300

Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel

Autori: P. Lopez-Crespo; J. Vazquez-Peralta; C. Simpson; T. Buslaps; P. J. Withers
Pubblicato in: 'Frattura ed Integrità Strutturale ', vol: 41 , pages: 203-210 (2017), Numero 1, 2017, ISSN 1971-8993
Editore: Gruppo Italiano Frattura
DOI: 10.3221/IGF-ESIS.41.28

MicroCT imaging reveals differential 3D micro-scale remodelling of the murine aorta in ageing and Marfan syndrome

Autori: Júlia López-Guimet, Lucía Peña-Pérez, Robert S. Bradley, Patricia García-Canadilla, Catherine Disney, Hua Geng, Andrew J. Bodey, Philip J. Withers, Bart Bijnens, Michael J. Sherratt, Gustavo Egea
Pubblicato in: Theranostics, Numero 8/21, 2018, Pagina/e 6038-6052, ISSN 1838-7640
Editore: Ivyspring International Publisher
DOI: 10.7150/thno.26598

X-ray Tomographic Imaging of Tensile Deformation Modes of Electrospun Biodegradable Polyester Fibers

Autori: Jekaterina Maksimcuka, Akiko Obata, William W. Sampson, Remi Blanc, Chunxia Gao, Philip J. Withers, Olga Tsigkou, Toshihiro Kasuga, Peter D. Lee, Gowsihan Poologasundarampillai
Pubblicato in: Frontiers in Materials, Numero 4, 2017, ISSN 2296-8016
Editore: Frontiers in Materials
DOI: 10.3389/fmats.2017.00043

X-ray micro-computed tomography ( μ CT): an emerging opportunity in parasite imaging

Autori: James D. B. O'Sullivan, Julia Behnsen, Tobias Starborg, Andrew S. MacDonald, Alexander T. Phythian-Adams, Kathryn J. Else, Sheena M. Cruickshank, Philip J. Withers
Pubblicato in: Parasitology, Numero 145/7, 2018, Pagina/e 848-854, ISSN 0031-1820
Editore: Cambridge University Press
DOI: 10.1017/S0031182017002074

High resolution low kV EBSD of heavily deformed and nanocrystalline Aluminium by dictionary-based indexing

Autori: Saransh Singh, Yi Guo, Bartłomiej Winiarski, Timothy L. Burnett, Philip J. Withers, Marc De Graef
Pubblicato in: Scientific Reports, Numero 8/1, 2018, ISSN 2045-2322
Editore: Nature Publishing Group
DOI: 10.1038/s41598-018-29315-8

Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales

Autori: Visweswara C. Gudla, Alistair Garner, Malte Storm, Parmesh Gajjar, James Carr, Benjamin C. Palmer, John J. Lewandowski, Philip J. Withers, N. J. Henry Holroyd, Timothy L. Burnett
Pubblicato in: Corrosion Reviews, Numero 0/0, 2019, ISSN 0334-6005
Editore: Freund Publishing House Ltd.
DOI: 10.1515/corrrev-2019-0044

Multi-modal plasma focused ion beam serial section tomography of an organic paint coating

Autori: Xiangli Zhong, M. Grace Burke, Philip J. Withers, Xun Zhang, Xiaorong Zhou, Timothy L. Burnett, Yanwen Liu, Stuart B. Lyon, Simon R. Gibbon
Pubblicato in: Ultramicroscopy, Numero 197, 2019, Pagina/e 1-10, ISSN 0304-3991
Editore: Elsevier BV
DOI: 10.1016/j.ultramic.2018.10.003

Evolution of kink bands in a notched unidirectional carbon fibre-epoxy composite under four-point bending

Autori: Ying Wang, Yuan Chai, Costas Soutis, Philip J. Withers
Pubblicato in: Composites Science and Technology, Numero 172, 2019, Pagina/e 143-152, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.01.014

Weld zone and residual stress development in AA7050 stationary shoulder friction stir T-joint weld

Autori: T. Sun, M.J. Roy, D. Strong, C. Simpson, P.J. Withers, P.B. Prangnell
Pubblicato in: Journal of Materials Processing Technology, Numero 263, 2019, Pagina/e 256-265, ISSN 0924-0136
Editore: Elsevier BV
DOI: 10.1016/j.jmatprotec.2018.08.022

Quantifying fatigue overload retardation mechanisms by energy dispersive X-ray diffraction

Autori: Simpson C.A, Kozuki S, Lopez-Crespo P, Mostafavi M, Connolley T, Withers P.J
Pubblicato in: Journal of the Mechanics and Physics of Solids, Numero 124, 2019, Pagina/e 392-410, ISSN 0022-5096
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2018.10.020

Laminography in the lab: imaging planar objects using a conventional x-ray CT scanner

Autori: S L Fisher, D J Holmes, J S Jørgensen, P Gajjar, J Behnsen, W R B Lionheart, P J Withers
Pubblicato in: Measurement Science and Technology, Numero 30/3, 2019, Pagina/e 035401, ISSN 0957-0233
Editore: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aafcae

Microstructural degradation of Electron Beam-Physical Vapour Deposition Thermal Barrier Coating during thermal cycling tracked by X-ray micro-computed tomography

Autori: Xun Zhang, Yang Zhao, Philip J. Withers, Ping Xiao
Pubblicato in: Scripta Materialia, Numero 152, 2018, Pagina/e 79-83, ISSN 1359-6462
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2018.04.010

Investigation of residual stress distribution and texture evolution in AA7050 stationary shoulder friction stir welded joints

Autori: T. Sun, A.S. Tremsin, M.J. Roy, M. Hofmann, P.B. Prangnell, P.J. Withers
Pubblicato in: Materials Science and Engineering: A, Numero 712, 2018, Pagina/e 531-538, ISSN 0921-5093
Editore: Elsevier BV
DOI: 10.1016/j.msea.2017.12.019

Effect of hydration and crack orientation on crack-tip strain, crack opening displacement and crack-tip shielding in elephant dentin

Autori: Xuekun Lu, Shelley D. Rawson, Philip J. Withers
Pubblicato in: Dental Materials, Numero 34/7, 2018, Pagina/e 1041-1053, ISSN 0109-5641
Editore: Elsevier BV
DOI: 10.1016/j.dental.2018.04.002

3D Imaging of Indentation Damage in Bone

Autori: Tristan Lowe, Egemen Avcu, Etienne Bousser, William Sellers, Philip Withers
Pubblicato in: Materials, Numero 11/12, 2018, Pagina/e 2533, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma11122533

Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy

Autori: N.O. Larrosa, W. Wang, N. Read, M.H. Loretto, C. Evans, J. Carr, U. Tradowsky, M.M. Attallah, P.J. Withers
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 98, 2018, Pagina/e 123-133, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2018.09.011

Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials

Autori: P. Lopez-Crespo, J.V. Peralta, P.J. Withers
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 98, 2018, Pagina/e 72-77, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2018.09.010

Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi 2 particles

Autori: Justyna Kulczyk-Malecka, Xun Zhang, James Carr, Franck Nozahic, Claude Estournès, Daniel Monceau, Alexandra L. Carabat, Willem G. Sloof, Sybrand van der Zwaag, Philip J. Withers, Ping Xiao
Pubblicato in: Journal of the European Ceramic Society, Numero 38/12, 2018, Pagina/e 4268-4275, ISSN 0955-2219
Editore: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2018.04.053

Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography

Autori: Daniil Kazantsev, Jakob S Jørgensen, Martin S Andersen, William R B Lionheart, Peter D Lee, Philip J Withers
Pubblicato in: Inverse Problems, Numero 34/6, 2018, Pagina/e 064001, ISSN 0266-5611
Editore: Institute of Physics Publishing
DOI: 10.1088/1361-6420/aaba86

X-ray computed tomography of polymer composites

Autori: S.C. Garcea, Y. Wang, P.J. Withers
Pubblicato in: Composites Science and Technology, Numero 156, 2018, Pagina/e 305-319, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2017.10.023

Quantifying fibre reorientation during axial compression of a composite through time-lapse X-ray imaging and individual fibre tracking

Autori: Monica Jane Emerson, Ying Wang, Philip John Withers, Knut Conradsen, Anders Bjorholm Dahl, Vedrana Andersen Dahl
Pubblicato in: Composites Science and Technology, Numero 168, 2018, Pagina/e 47-54, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2018.08.028

Evaporation Dynamics and NaCl Precipitation on Capillarity-Coupled Heterogeneous Porous Surfaces

Autori: Mina Bergstad, Dani Or, Philip J. Withers, Nima Shokri
Pubblicato in: Water Resources Research, Numero 54/6, 2018, Pagina/e 3876-3885, ISSN 0043-1397
Editore: American Geophysical Union
DOI: 10.1029/2018wr022614

The imaging of failure in structural materials by synchrotron radiation X-ray microtomography

Autori: S.C. Wu, T.Q. Xiao, P.J. Withers
Pubblicato in: Engineering Fracture Mechanics, Numero 182, 2017, Pagina/e 127-156, ISSN 0013-7944
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2017.07.027

Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet

Autori: S. Pawar, T.J.A. Slater, T.L. Burnett, X. Zhou, G.M. Scamans, Z. Fan, G.E. Thompson, P.J. Withers
Pubblicato in: Acta Materialia, Numero 133, 2017, Pagina/e 90-99, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2017.05.027

The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms

Autori: F. Léonard, J. Stein, C. Soutis, P.J. Withers
Pubblicato in: Composites Science and Technology, Numero 152, 2017, Pagina/e 139-148, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2017.08.034

SparseBeads data: benchmarking sparsity-regularized computed tomography

Autori: Jakob S Jørgensen, Sophia B Coban, William R B Lionheart, Samuel A McDonald, Philip J Withers
Pubblicato in: Measurement Science and Technology, Numero 28/12, 2017, Pagina/e 124005, ISSN 0957-0233
Editore: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aa8c29

Completing the picture through correlative characterization

Autori: T. L. Burnett, P. J. Withers
Pubblicato in: Nature Materials, 2019, ISSN 1476-1122
Editore: Nature Publishing Group
DOI: 10.1038/s41563-019-0402-8

The effect of powder oxidation on defect formation in laser additive manufacturing

Autori: Chu Lun Alex Leung, Sebastian Marussi, Michael Towrie, Robert C. Atwood, Philip J. Withers, Peter D. Lee
Pubblicato in: Acta Materialia, Numero 166, 2019, Pagina/e 294-305, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2018.12.027

The heterogenous distribution of white etching matter (WEM) around subsurface cracks in bearing steels

Autori: M.E. Curd, T.L. Burnett, J. Fellowes, J. Donoghue, P. Yan, P.J. Withers
Pubblicato in: Acta Materialia, Numero 174, 2019, Pagina/e 300-309, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2019.05.052

Experimental steering of electron microscopy studies using prior X-ray computed tomography

Autori: Tobias Starborg, James D.B. O'Sullivan, Claudia Martins Carneiro, Julia Behnsen, Kathryn J. Else, Richard K. Grencis, Philip J. Withers
Pubblicato in: Ultramicroscopy, Numero 201, 2019, Pagina/e 58-67, ISSN 0304-3991
Editore: Elsevier BV
DOI: 10.1016/j.ultramic.2019.03.002

Time-lapse three-dimensional imaging of crack propagation in beetle cuticle

Autori: Dan Sykes, Rebecca Hartwell, Rob S. Bradley, Timothy L. Burnett, Benjamin Hornberger, Russell J. Garwood, Philip J. Withers
Pubblicato in: Acta Biomaterialia, Numero 86, 2019, Pagina/e 109-116, ISSN 1742-7061
Editore: Elsevier BV
DOI: 10.1016/j.actbio.2019.01.031

Time-dependent in situ measurement of atmospheric corrosion rates of duplex stainless steel wires

Autori: Cem Örnek, Fabien Léonard, Samuel A. McDonald, Anuj Prajapati, Philip J. Withers, Dirk L. Engelberg
Pubblicato in: npj Materials Degradation, Numero 2/1, 2018, ISSN 2397-2106
Editore: SpringerNature
DOI: 10.1038/s41529-018-0030-9

3D characterization of porosity in an air plasma-sprayed thermal barrier coating and its effect on thermal conductivity

Autori: Xun Zhang, Justyna Kulczyk-Malecka, James Carr, Ping Xiao, Philip J. Withers
Pubblicato in: Journal of the American Ceramic Society, Numero 101/6, 2018, Pagina/e 2482-2492, ISSN 0002-7820
Editore: American Ceramic Society
DOI: 10.1111/jace.15409

Anisotropic Crack Propagation and Deformation in Dentin Observed by Four-Dimensional X-ray Nano-Computed Tomography

Autori: Xuekun Lu, Marta Peña Fernández, Robert S Bradley, Shelley D Rawson, Marie O'Brien, Benjamin Hornberger, Marty Leibowitz, Gianluca Tozzi, Philip J Withers
Pubblicato in: Acta Biomaterialia, 2019, ISSN 1742-7061
Editore: Elsevier BV
DOI: 10.1016/j.actbio.2019.06.042

Following the effect of braid architecture on performance and damage of carbon fibre/epoxy composite tubes during torsional strainin

Autori: Y. Chai et al
Pubblicato in: Composites Science and Technology, 2020, Pagina/e vol. 200, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.compscitech.2020.108451

Serial sectioning in the SEM for three dimensional materials science

Autori: M. P. Echlin, T. L. Burnett, A. T. Polonsky, T. M. Pollock, and P. J. Withers
Pubblicato in: Current Opinion in Solid State and Materials Science, 2020, Pagina/e vol. 24, no. 2, p. 100817, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.cossms.2020.100817

Role of SiC and Si3N4 reinforcing particles in the tribological performance of graphite-based composites

Autori: M. A. Hernandez, K. D. Bakoglidis, P. J. Withers, and P. Xiao
Pubblicato in: Wear, 2020, Pagina/e vol. 456, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.wear.2020.203399

A three-dimensional mechanistic study of the drivers of classical twin nucleation and variant selection in Mg alloys: A mesoscale modelling and experimental study

Autori: C. Paramatmuni, Y. Guo, P. J. Withers, and F. P. E. Dunne
Pubblicato in: International Journal of Plasticity, 2021, Pagina/e vol. 143,, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijplas.2021.103027

Damage evolution in braided composite tubes under torsion studied by in-situ X-ray computed tomography

Autori: Y. Chai et al
Pubblicato in: Composites Science and Technology, 2020, Pagina/e vol. 188, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.compscitech.2019.107976

In situ through-thickness analysis of crack tip fields with synchrotron X-ray diffraction

Autori: P. Lopez-Crespo, J. V. Peralta, J. F. Kelleher, and P. J. Withers
Pubblicato in: International Journal of Fatigue, 2019, Pagina/e vol. 127, pp. 500-508, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2019.06.029

A multi-scale correlative investigation of ductile fracture

Autori: M. Daly et al
Pubblicato in: Acta Materialia, 2017, Pagina/e vol. 130, pp. 56-68, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2017.03.028

The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion

Autori: Z. Wu et al
Pubblicato in: Materials & Design, 2020, Pagina/e vol. 192, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106317

Characterisation of cuticular inflation development and ultrastructure in Trichuris muris using correlative X-ray computed tomography and electron microscopy

Autori: J. D. B. O'Sullivan, S. M. Cruickshank, T. Starborg, P. J. Withers, and K. J. Else,
Pubblicato in: Scientific Reports, 2020, Pagina/e vol. 10, no. 1, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-020-61916-0

X-ray Micro-Computed Tomography: An Emerging Technology to Analyze Vascular Calcification in Animal Models

Autori: S. J. Borland et al
Pubblicato in: International Journal of Molecular Sciences, 2020, Pagina/e no. 12, p. 4538, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.3390/ijms21124538

Inhibiting weld cracking in high-strength aluminium alloys

Autori: Y. Hu et al
Pubblicato in: Nature Communications, 2022, Pagina/e vol. 13, no. 1, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41467-022-33188-x

An in-situ method for protecting internal cracks/pores from ion beam damage and reducing curtaining for TEM sample preparation using FIB

Autori: X. L. Zhong, S. J. Haigh, X. Zhou, and P. J. Withers
Pubblicato in: Ultramicroscopy, 2020, Pagina/e vol. 219, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.ultramic.2020.113135

Enhanced hyperspectral tomography for bioimaging by spatiospectral reconstruction

Autori: R. Warr et al.,
Pubblicato in: Scientific Reports, Numero vol. 11, no. 1, 2021, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1038/s41598-021-00146-4

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

Autori: A. Heidarzadeh et al
Pubblicato in: Progress in Materials Science, 2021, Pagina/e vol. 117, p. 100752, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.pmatsci.2020.100752

4D imaging of void nucleation, growth, and coalescence from large and small inclusions in steel under tensile deformation

Autori: Y. Guo, T. L. Burnett, S. A. McDonald, M. Daly, A. H. Sherry, and P. J. Withers
Pubblicato in: Journal of Materials Science & Technology, 2022, Pagina/e vol. 123, pp. 168-176, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.jmst.2022.01.024

Time-Lapse Helical X-ray Computed Tomography (CT) Study of Tensile Fatigue Damage Formation in Composites for Wind Turbine Blades

Autori: Y. Wang, L. P. Mikkelsen, G. Pyka, and P. J. Withers
Pubblicato in: Materials, 2018, Pagina/e vol. 11, no. 11, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.3390/ma11112340

Exploiting Confinement to Study the Crystallization Pathway of Calcium Sulfate

Autori: C. Anduix-Canto et al.
Pubblicato in: Advanced Functional Materials, 2021, Pagina/e vol. 31 no. (50), p. 2107312, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1002/adfm.202107312

Defect evolution during high temperature tension-tension fatigue of SLM AISi10Mg alloy by synchrotron tomography

Autori: J. G. Bao et al
Pubblicato in: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2020, Pagina/e vol. 792, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.msea.2020.139809

Redistribution of carbon caused by butterfly defects in bearing steels

Autori: M. E. Curd, T. L. Burnett, J. Fellowes, R. Yan, and P. J. Withers
Pubblicato in: Acta Materialia, 2020, Pagina/e vol. 183, pp. 390-397, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2019.10.057

Core Imaging Library-Part I: a versatile Python framework for tomographic imaging,

Autori: J. S. Jorgensen et al
Pubblicato in: Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, 2021, Pagina/e vol. 379, no. 2204, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1098/rsta.2020.0192

Evolution of fibre deflection leading to kink-band formation in unidirectional glass fibre/epoxy composite under axial compression

Autori: Y. Wang et al
Pubblicato in: Composites Science and Technology,, 2021, Pagina/e vol. 213, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.compscitech.2021.108929

Assessing the efficacy of tomographic reconstruction methods through physical quantification techniques

Autori: S. B. Coban, W. R. B. Lionheart, and P. J. Withers
Pubblicato in: Measurement Science and Technology, 2021, Pagina/e vol. 32, no. 7, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1088/1361-6501/abe337

Estimation of the plastic zone in fatigue through the thickness based on synchrotron diffraction data

Autori: Carrera, M. Lopez-Crespo, P. Tai, Y. H. Yates, J. R. Moreno, B. Buslaps, T. Withers, P. J.
Pubblicato in: 3rd International Conference on Structural Integrity, 2019, Pagina/e 872-877, ISSN 2452-3216
Editore: Elsevier
DOI: 10.1016/jprostr.2019.08.116

Tailoring the Microstructure of Lamellar Ti3C2Tx MXene Aerogel by Compressive Straining

Autori: S. D. Rawson et al
Pubblicato in: Acs Nano, 2022, Pagina/e vol. 16, no. 2, pp. 1896-1908, ISSN 0264-1275
Editore: Elsevier
DOI: 10.1021/acsnano.1c04538

È in corso la ricerca di dati su OpenAIRE...

Pubblicazioni

Condividi questa pagina

Scarica