Induction heating of refractory materials in continuous casting of steel

Projektinformationen

ID Finanzhilfevereinbarung: 7210-CA-165

Projekt abgeschlossen

Startdatum 1 Juli 1992

Enddatum 30 Juni 1995

Finanziert unter

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Gesamtkosten € 478 000,00

EU-Beitrag € 286 800,00

Koordiniert durch

THYSSEN STAHL
Germany

Ziel

Uncontrolled solidification at the refractory material is a fundamental problem, especially for near net shape casting processes where refractory parts are in close contact with the cold mould, roll or belt. This uncontrolled solidification leads to unacceptable defects or even to an interruption of the casting process. A possible means to avoid or reduce such problems is to heat the refractory material by induction also during the casting process. Thus suitable refractory materials as well as methods for their inductive heating must be developed in order to investigate the technical feasibility of this process.

Programm/Programme

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Thema/Themen

• C3 - Casting and solidification

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

THYSSEN STAHL

• EU-Beitrag: Keine Daten
• Adresse: Kaiser-Wilhelm-Strasse 100 ; 47166 DUISBURG ; Deutschland
• Gesamtkosten: Keine Daten

Beteiligte (1)

DIDIER FORSCHUNGSINSTITUT

Deutschland

• EU-Beitrag: Keine Daten
• Adresse: Didierstrasse 27 ; 65203 WIESBADEN
• Gesamtkosten: Keine Daten