Precision Additive Metal Manufacturing

Leistungen

At least 2 journal and 2 conference papers/ ESR

Each ESR should aim, during his/her 3 year PAM^2 training period, to publish at least 2 journal papers and 2 conference papers; the conference papers will also be presented (either as a poster or an oral presentation) by the ESR.

Public website PAM^2

A public and interactive website will be made. The PAM^2 website will be used to publicly post the PAM^2 ESR vacancies and the PAM^2 dissemination activities (e.g. publications from open access sources or from journals that allow post-print archiving, press releases, YouTube videos, etc.) and announce relevant events. For example a plan for the public lectures will be made by M6 and published on the website and updated subsequently. There will also be an interactive part on the website, where anyone interested in the project can make comments or ask questions. The more popular part of the website will also provide access to the more in-depth research results, as far as these are in the public domain. Alternate ESRs will be in charge of answering the questions (for a month at a time). This will be coordinated by the WP5 leader (TUD).

YouTube movies of hands-on projects

During the network-wide workshops, hands-on training will be given in groups. Each group will work on a specific AM example that they carry with them from workshop to workshop, from computational design to product assessment. As a training for the students and as an outreach activity, they will document each hands-on session with a YouTube movie. This will form part of a number of movies documenting the whole production process. This series of movies, gradually released depending on the workshop schedule, can be used to train and inform the general public, but also to complement theoretical AM training given in the post-PAM^2 period. In addition, this series can form a positive ‘competition’ between the different ESR groups, where they can compete for the most views to their movie series. This competitive aspect will ensure that the quality of the movies is high and that the public is encouraged to view them. The ESRs in the group will take turns in making the movie. These movies will include references to in-depth information, e.g. PAM^2 papers published in open access journals, and thus act as an attractive portal to the scientific outcome of the program.

Understanding the relationship between the processing parameters of AM test cases and the internal and external quality of these parts

In-process high speed measurements of the melt pool (KU Leuven), post-process metrology results including post-AM CT (UNIPD) and TEM/SEM investigations of cross sections through parts, will be linked to understand the relationship between the processing parameters of the AM test cases and the internal and external quality of these parts. Understanding this relationship between processing parameters and quality of the part is the first step towards the possibility for in-process control.

Review and selection of appropriate post-process instrumentation and its use for the end-user case studies

Optical and x-ray methods will be reviewed, selected and further developed for the post-process measurement of the internal and external form of AM parts. In the optical case (UNOTT), modelling of the instrument response will be used to reduce systematic errors and improve instrument bandwidth (therefore, allowing the complex structures produced by AM to be measured effectively). In the X-ray CT case (UNIPD), standard methods for measuring AM parts and for estimating measurement uncertainties will be developed, and good practice guidance will be produced. The most appropriate post-process instrumentation and its use for the end-user case studies will be selected.

Report on in-situ and post-AM laser-based processes to improve the AM part surface

KIT will develop a post-AM laser-based finishing process for the reduction of surface roughness, control of surface hardness, surface wettability and the enhancement of edge quality. In addition, KU Leuven will develop an in-situ subtractive laser-based process that can be combined with the additive process to increase part accuracy, reduce part roughness and porosity by a factor of 10-16. A report of how the in-process and post-AM laser-based processes improve the surface properties of the AM part will be written.

Improved topology optimisation techniques

Advanced computational design tools, which enable effective 3D design of competitive precision components to be produced by AM, are developed. The newly developed topology optimisation techniques will target precision designs which are “AM ready” and hence do not require expensive re-engineering to make them suited for AM. The elimination or major reduction of these re-engineering steps will reduce costs, improve time-to-market and lead to designs with superior final precision and performance. PAM^2 gives the unique setting to build upon both AM process knowledge and new AM process models. The latter will be thoroughly integrated in topology optimisation tools for precision components. For this purpose, reduced-order AM process models will be developed which also provide the paramount sensitivity information. Computational modelling techniques will be developed in collaboration with the researchers in Task 1.2 and validated via collaboration with WP2 and WP3

Thermo-microstructural-mechanical model for precision AM and secondary processing

Process knowledge from WP2 partners and measurements from WP3 partners are used for setting up simulations and for calibrating the numerical process models. A coupled multi-scale thermo-metallurgical-mechanical model for simulating precision additive manufacturing is developed by using a local model for simulating laser-material interaction and melting/solidification processes and a global thermo-mechanical model for evaluating residual stresses and deformations. Smart, advanced modelling techniques to reduce computation time to an acceptable range while preserving accuracy are implemented and statistical methods for a robust calibration of the numerical models are applied. In addition, a thermo-microstructural-mechanical model of secondary processing of PAM^2 parts is developed through fast and accurate thermal, microstructural and mechanical solvers capable of handling large computational domains. The evolution of part porosities and resulting material properties is tracked by a developed thermal-microstructural model and constitutive modelling of materials to predict residual stresses and deformations is implemented.

Comparison of simulated and experimental behaviour of AM parts

The thermo-microstructural-mechanical models for precision AM and secondary processing (Task 1.2) are combined to simulate the entire precision additive manufacturing process chain. Residual stresses, deformations and mechanical-microstructural properties of parts designed in Task 1.1 are predicted and the results are validated in collaboration with WP2 and WP3 partners. Subsequent to successful validation of working models, numerical model based process optimisation and process uncertainty quantification of both SLM and secondary process are performed to better control the characteristics of the parts produced in PAM^2 as well as to increase the process knowledge base.

PAM^2 Summer schools

2 summer schools will be organised: Summer School 1, the Leadership course at NP TEC (M18) is part of D4.2. Summer School 2, covering an in-depth AM study takes place at UNIPD (M30) and consists of a technical training (3.5 days) given by senior researchers from all beneficiaries and partners to ensure an in-depth examination of all aspects of AM. The programme will be structured in 7 courses (1/2 day each) on the following topics: (1) General introduction to AM (review and more in-depth technical training on contents of Workshop 1); (2) Advanced system design, specs and computational design; (3) Advanced process modelling; (4) Manufacturing and process control; (5) Introduction to post-processing; (6) Metrology for AM; (7) Introduction to geometrical and functional assessment. Also a tour of the facilities and a Poster session is foreseen.

PAM^2 symposium at euspen conference

A special symposia will be organised at the euspen international conference (http://www.euspen.eu/) in June 2019 and June 2020. This symposium will be jointly organised with chairpersons from each beneficiary/partner (for example 4 sessions with 3 chairpersons each) who will be in charge of inviting keynote speakers and chairing the session.

Prototype in-process instrument characterised

A hybrid optical system will be developed, which combines a vision system with a focus variation system. The hybrid system will be capable of measuring the presence of defects and then measuring the topography of such defects. The system will be developed as a collaboration between UNOTT and ALICON. The prototype in-process instrument will characterized and a report will be written.

Veröffentlichungen

Fast Detection of Heat Accumulation in Powder Bed Fusion Using Computationally Efficient Thermal Models

Autoren: Rajit Ranjan, Can Ayas, Matthijs Langelaar, Fred van Keulen
Veröffentlicht in: Materials, Ausgabe 13/20, 2020, Seite(n) 4576, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma13204576

Part-scale thermo-mechanical modelling of distortions in Laser Powder Bed Fusion – Analysis of the sequential flash heating method with experimental validation

Autoren: Mohamad Bayat, Christopher G. Klingaa, Sankhya Mohanty, David De Baere, Jesper Thorborg, Niels S. Tiedje, Jesper H. Hattel
Veröffentlicht in: Additive Manufacturing, Ausgabe 36, 2020, Seite(n) 101508, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2020.101508

On-machine focus variation measurement for micro-scale hybrid surface texture machining

Autoren: Teguh Santoso; Wahyudin P. Syam; Subbareddy Darukumalli; Yukui Cai; Franz Helmli; Xichun Luo; Richard Leach
Veröffentlicht in: The International Journal of Advanced Manufacturing Technology, Ausgabe 6, 2020, ISSN 0268-3768
Herausgeber: Springer Verlag
DOI: 10.1007/s00170-020-05767-z

Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V

Autoren: Amal Charles, Ahmed Elkaseer, Lore Thijs, Steffen G. Scholz
Veröffentlicht in: Applied Sciences, Ausgabe 10/7, 2020, Seite(n) 2416, ISSN 2076-3417
Herausgeber: MDPI
DOI: 10.3390/app10072416

Numerical Investigation into the Effect of Different Parameters on the Geometrical Precision in the Laser-Based Powder Bed Fusion Process Chain

Autoren: David De Baere, Mandanà Moshiri, Sankhya Mohanty, Guido Tosello, Jesper Henri Hattel
Veröffentlicht in: Applied Sciences, Ausgabe 10/10, 2020, Seite(n) 3414, ISSN 2076-3417
Herausgeber: MDPI
DOI: 10.3390/app10103414

Microstructural modelling of above β-transus heat treatment of additively manufactured Ti-6Al-4V using cellular automata

Autoren: David De Baere, Sankhya Mohanty, Jesper H. Hattel
Veröffentlicht in: Materials Today Communications, Ausgabe 24, 2020, Seite(n) 101031, ISSN 2352-4928
Herausgeber: Elsevier BV
DOI: 10.1016/j.mtcomm.2020.101031

An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system

Autoren: Mandaná Moshiri, Amal Charles, Ahmed Elkaseer, Steffen Scholz, Sankhya Mohanty, Guido Tosello
Veröffentlicht in: Procedia CIRP, Ausgabe 93, 2020, Seite(n) 32-37, ISSN 2212-8271
Herausgeber: Elsevier B.V
DOI: 10.1016/j.procir.2020.04.151

Analysis of an as-built metal additively manufactured tool cavity insert performance and advantages for plastic injection moulding

Autoren: Mandaná Moshiri, Dario Loaldi, Filippo Zanini, Damiano Sgaravato, Simone Carmignato, Guido Tosello
Veröffentlicht in: Journal of Manufacturing Processes, Ausgabe 61, 2021, Seite(n) 369-382, ISSN 1526-6125
Herausgeber: Elsevier BV
DOI: 10.1016/j.jmapro.2020.11.035

Novel strategy for quality improvement of up-facing inclined surfaces of LPBF parts by combining laser-induced shock waves and in situ laser remelting

Autoren: Jitka Metelkova, Daniel Ordnung, Yannis Kinds, Brecht Van Hooreweder
Veröffentlicht in: Journal of Materials Processing Technology, 2021, ISSN 0924-0136
Herausgeber: Elsevier BV
DOI: 10.1016/j.jmatprotec.2020.116981

Texture of inclined up-facing surfaces in laser powder bed fusion of metals

Autoren: Jitka Metelkova, Lars Vanmunster, Han Haitjema, Brecht Van Hooreweder.
Veröffentlicht in: Additive Manufacturing, Ausgabe 42, 2021, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2021.101970

On the influence of laser defocusing in Selective Laser Melting of 316L

Autoren: Jitka Metelkova, Yannis Kinds, Karolien Kempen, Charlotte de Formanoir, Ann Witvrouw, Brecht Van Hooreweder
Veröffentlicht in: Additive Manufacturing, Ausgabe 23, 2018, Seite(n) 161-169, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2018.08.006

Laser surface modification and polishing of additive manufactured metallic parts

Autoren: Juliana dos Santos Solheid, Hans Jürgen Seifert, Wilhelm Pfleging
Veröffentlicht in: Procedia CIRP, Ausgabe 74, 2018, Seite(n) 280-284, ISSN 2212-8271
Herausgeber: Elsevier
DOI: 10.1016/j.procir.2018.08.111

Thermo-fluid-metallurgical modelling of the selective laser melting process chain

Autoren: David De Baere, Mohamad Bayat, Sankhya Mohanty, Jesper Hattel
Veröffentlicht in: Procedia CIRP, Ausgabe 74, 2018, Seite(n) 87-91, ISSN 2212-8271
Herausgeber: Elsevier Ltd
DOI: 10.1016/j.procir.2018.08.035

Benchmarking of Laser Powder Bed Fusion Machines

Autoren: Mandaná Moshiri Stefano Candeo Simone Carmignato Snakhya Mohanty Guido Tosello
Veröffentlicht in: Journal of Manufacturing and Materials Processing, Ausgabe 3/4, 2019, Seite(n) 85, ISSN 2504-4494
Herausgeber: MDPI
DOI: 10.3390/jmmp3040085

Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting

Autoren: Amal Charles Prashanth, Ahmed Elkaseer, Lore Thijs, Veit Hagenmeyer, Steffen Scholz
Veröffentlicht in: Applied Sciences, Ausgabe Volume 9, Ausgabe 6, 2019, ISSN 2076-3417
Herausgeber: MDPI

Laboratory X-ray tomography for metal additive manufacturing: Round robin test

Autoren: Anton du Plessis, Stephan G. le Roux, Jess Waller, Philip Sperling, Nils Achilles, Andre Beerlink, Jean-François Métayer, Mirko Sinico, Gabriel Probst, Wim Dewulf, Florian Bittner, Hans-Josef Endres, Marian Willner, Ágota Drégelyi-Kiss, Tomas Zikmund, Jakub Laznovsky, Jozef Kaiser, Pascal Pinter, Stefan Dietrich, Elena Lopez, Oliver Fitzek, Porebski Konrad
Veröffentlicht in: Additive Manufacturing, Ausgabe 30, 2019, Seite(n) 100837, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2019.100837

Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF

Autoren: Mohamad Bayat, Sankhya Mohanty, Jesper Henri Hattel
Veröffentlicht in: International Journal of Heat and Mass Transfer, Ausgabe 139, 2019, Seite(n) 95-114, ISSN 0017-9310
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.ijheatmasstransfer.2019.05.003

A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy

Autoren: Mohamad Bayat, Sankhya Mohanty, Jesper Henri Hattel
Veröffentlicht in: International Journal of Heat and Mass Transfer, Ausgabe 139, 2019, Seite(n) 213-230, ISSN 0017-9310
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.ijheatmasstransfer.2019.05.017

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Autoren: Mohamad Bayat, Aditi Thanki, Sankhya Mohanty, Ann Witvrouw, Shoufeng Yang, Jesper Thorborg, Niels Skat Tiedje, Jesper Henri Hattel
Veröffentlicht in: Additive Manufacturing, Ausgabe 30, 2019, Seite(n) 100835, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2019.100835

Laser polishing of additively manufactured Ti-6Al-4V - Microstructure evolution and material properties [in press]

Autoren: Solheid, Juliana; Mohanty, Sankhya; Bayat, Mohamad; Wunsch, Torsten; Weidler, Peter G.; Seifert, Hans J.; Pfleging, Wilhelm
Veröffentlicht in: Journal of Laser Applications, Ausgabe 1, 2020, ISSN 1042-346X
Herausgeber: Laser Institute of America
DOI: 10.5445/IR/1000104497

Two-Step Laser Post-Processing for the Surface Functionalization of Additively Manufactured Ti-6Al-4V Parts

Autoren: Juliana S. Solheid, Torsten Wunsch, Vanessa Trouillet, Simone Weigel, Tim Scharnweber, Hans Jürgen Seifert, Wilhelm Pfleging
Veröffentlicht in: Materials, Ausgabe 13/21, 2020, Seite(n) 4872, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma13214872

Assessment and verification of mean effective diameter of internal channels fabricated by laser powder bed fusion

Autoren: Lokesh Chandrabalan, Markus Baier, Roberto Meloni, Luca Ammannato, Eugenio Del Puglia, Simone Carmignato
Veröffentlicht in: Procedia CIRP, Ausgabe 94, 2020, Seite(n) 414-418, ISSN 2212-8271
Herausgeber: ELSEVIER
DOI: 10.1016/j.procir.2020.09.156

Hybrid dual laser processing for improved quality of inclined up-facing surfaces in laser powder bed fusion of metals

Autoren: Jitka Metelkova, Lars Vanmunster, Han Haitjema, Daniel Ordnung, Jean-Pierre Kruth, Brecht Van Hooreweder
Veröffentlicht in: Journal of Materials Processing Technology, Ausgabe 298, 2021, ISSN 0924-0136
Herausgeber: Elsevier BV
DOI: 10.1016/j.jmatprotec.2021.117263

Improving the quality of up-facing inclined surfaces in laser powder bed fusion of metals using a dual laser setup

Autoren: Jitka Metelkova, Daniel Ordnung, Yannis Kinds, Ann Witvrouw, Brecht Van Hooreweder
Veröffentlicht in: Procedia CIRP, Ausgabe 94, 2020, Seite(n) 266-269, ISSN 2212-8271
Herausgeber: Elsevier
DOI: 10.1016/j.procir.2020.09.050

Part-scale mechanical modelling of LPBF including microstructural evolution effects

Autoren: D De Baere, M Bayat, S Mohanty, J H Hattel
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe 861, 2020, Seite(n) 012013, ISSN 1757-899X
Herausgeber: IOP Publishing
DOI: 10.1088/1757-899x/861/1/012013

Resolving the effects of local convective heat transfer via adjustment of thermo-physical properties in pure heat conduction simulation of Laser Powder Bed Fusion (L-PBF)

Autoren: M Bayat, V K Nadimpalli, S Mohanty, J H Hattel
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe 861, 2020, Seite(n) 012006, ISSN 1757-899X
Herausgeber: IOP Publishing
DOI: 10.1088/1757-899x/861/1/012006

Effect of process parameters on the surface topography formation in precision additive metal manufacturing

Autoren: Aditi Thanki, Ann Witvrouw and Han Haitjema
Veröffentlicht in: Euspen 20th International Conference and Exhibition, 2020
Herausgeber: Euspen

Prediction of Dimensional Error in Down-Facing Surfaces for Laser Powder Bed Fusion Parts

Autoren: Amal Charles, Ahmed Elkaseer, Lore Thijs, V. Hagenmeyer, Steffen Scholz
Veröffentlicht in: Conference: World Congress on Micro and Nano Manufacturing 2019 (WCMNM), 2019
Herausgeber: WCMNM 2019 Organisers

Controlling Local Overheating in Topology Optimization for Additive Manufacturing

Autoren: R. Ranjan, Y. Yang, C. Ayas, M. Langelaar, F. Van Keulen
Veröffentlicht in: Conference: Dimensional Accuracy and Surface Finish in Additive Manufacturing, October 2017, 2017
Herausgeber: Euspen

Characterization of AM Metal Powder with an Industrial Microfocus CT: Potential and Limitations

Autoren: Mirko Sinico, Evelina Ametova, Ann Witvrouw, Wim Dewulf
Veröffentlicht in: 2018 ASPE and euspen Summer Topical Meeting - Advancing Precision in Additive Manufacturing, Ausgabe Volume 69, 2018, ISBN 978-1-887706-76-6
Herausgeber: ASPE - American Society of Precision Engineering

A new design for an extensive benchmarking of additive manufacturing machines

Autoren: Mandaná Moshiri Guido Tosello Sankhya Mohanty
Veröffentlicht in: EUSPEN´s 18th International Conference & Exhibition, 2018, ISBN 978-0-9957751-2-1
Herausgeber: EUSPEN

Towards design for precision additive manufacturing: a simplified approach for heat accumulation detection

Autoren: R. Ranjan, C. Ayas, M. Langelaar, F. Van Keulen
Veröffentlicht in: 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, Ausgabe Volume 69, 2018, Seite(n) 29-34, ISBN 978-1-887706-76-6
Herausgeber: American Society for Precision Engineering (ASPE)

PRECISION ADDITIVE METAL MANUFACTURING

Autoren: Ann Witvrouw, Jitka Metelkova, Rajit Ranjan, Mohamad Bayat, David De Baere, Mandaná Moshiri, Guido Tosello, Juliana Solheid, Amal Charles, Steffen Scholz, Markus Baier, Simone Carmignato, Petros Stavroulakis, Amrozia Shaheen, Lore Thijs
Veröffentlicht in: 2018 ASPE and euspen Summer Topical Meeting 'Advancing Precision in Additive Manufacturing', Ausgabe Volume 69, 2018, Seite(n) 18-23, ISBN 978-1-887706-76-6
Herausgeber: American Society for Precision Engineering

A new conversion approach between different characterization methods to measure the spot size of micro computed tomography systems

Autoren: Markus Baier Filippo Zanini Enrico Savio Simone Carmignato
Veröffentlicht in: Conference Proceedings 18th International Conference & Exhibition, Ausgabe 18, 2018, Seite(n) 445-446, ISBN 978-0-9957751-2-1
Herausgeber: EUSPEN

Evaluation Method to Determine the Focal Spot Size of a CT System with a new Designed Resolution Test-chart

Autoren: Markus Baier
Veröffentlicht in: 8th Conference on Industrial Computed Tomography, Ausgabe 8, 2018, Seite(n) 208-209
Herausgeber: ndt.net

Laser-assisted post-processing of additive manufactured metallic parts

Autoren: Juliana dos Solheid Hans Jürgen Seifert Wilhelm Pfleging
Veröffentlicht in: EUSPEN's 18th International Conference & Exhibition, 2018
Herausgeber: EUSPEN

Defects investigation in additively manufactured steel products for injection moulding

Autoren: Mandaná Moshiri Guido Tosello Sankhya Mohanty
Veröffentlicht in: Euro PM2018 Congress Proceedings, 2018
Herausgeber: European Powder Metallurgy Association

Study of keyhole-porosities in selective laser melting using X-ray computed tomography

Autoren: Aditi Thanki Louca Goosens Raya Mertens Gabriel Probst Wim Dewulf Ann Witvrouw Shoufeng Yang
Veröffentlicht in: 2019
Herausgeber: ndt.net

A study of the factors influencing generated surface roughness of down-facing surfaces in Selective Laser Melting

Autoren: Amal Charles Prashanth, Ahmed Elkaseer, Tobias Müller, Lore Thijs, Maika Torge, Veit Hagenmeyer, Steffen Scholz
Veröffentlicht in: World Congress on Micro and Nano Manufacturing 2018, Ausgabe 2, 2018, Seite(n) 327-330
Herausgeber: Research Publishing Singapore

Effect of process parameters on dimensional accuracy of down-facing surfaces in Selective Laser Melting of Ti6Al4V

Autoren: Amal Charles Prashanth, Ahmed Elkaseer, Tobias Mueller, Lore Thijs, Veit Hagenmeyer, Steffen Scholz
Veröffentlicht in: 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, Ausgabe Volume 69, 2018, Seite(n) 83-88
Herausgeber: American Society for Precision Engineering (ASPE)

Modelling of the microstructural evolution of Ti6Al4V parts produced by selective laser melting during heat treatment

Autoren: David De Baere, Emilie Hørdum Valente, Sankhya Mohanty, Jesper Henri Hattel
Veröffentlicht in: euspen's 18th International Conference & Exhibition, 2018
Herausgeber: euspen's 18th International Conference & Exhibition

Numerical modelling and parametric study of grain morphology and resultant mechanical properties from selective laser melting process of Ti6Al4V

Autoren: Mohamad Bayat, Sankhya Mohanty, Jesper H Hattel
Veröffentlicht in: EUSPEN 18th International Conference & Exhibition, 2018
Herausgeber: EUSPEN

MULTI-SCALE MULTIPHYSICS SIMULATION OF METAL L-PBF AM PROCESS AND SUBSEQUENT MECHANICAL ANALYSIS

Autoren: M Bayat, D De Baere, Sankhya Mohanty, J H Hattel
Veröffentlicht in: Proceeding of 12th International Seminar on Numerical Analysis of Weldability , 2018
Herausgeber: Institute for Materials

Thermo-fluid-metallurgical modelling of laser-based powder bed fusion process

Autoren: Mohamad Bayat; Sankhya Mohanty; Jesper H. Hattel
Veröffentlicht in: 2018
Herausgeber: COMSOL conference

On-machine optical surface topography measurement sensor based on focus variation

Autoren: Subbareddy Darukumalli Teguh Santoso Wahyudin P. Syam Franz Helmli Richard Leach
Veröffentlicht in: 19th International Conference Proceedings: Bilbao 2019, 2019
Herausgeber: EUSPEN

A Mold Insert Case Study on Topology Optimized Design for Additive Manufacturing

Autoren: Mirko Sinico, Rajit Ranjan, Mandaná Moshiri, Can Ayas, Matthijs Langelaar, Ann Witvrouw, Fred van Keulen, Wim Dewulf
Veröffentlicht in: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, Ausgabe 2019, 2019, Seite(n) 1921-1951
Herausgeber: Solid Freeform Fabrication Symposium

Elevated edges of metal parts produced by laser powder bed fusion: characterization and post-process correction

Autoren: Jitka Metelkova, Charlotte de Formanoir, Han Haitjema, Ann Witvrouw, Wilhelm Pfleging, Brecht Van Hooreweder
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

Influence of the particle size distribution on surface quality of Maraging 300 parts produced by Laser Powder Bed Fusion

Autoren: Mirko Sinico, Ann Witvrouw, Wim Dewulf
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

ANN based prediction of dimensional error in down-facing surfaces for laser powder bed fusion parts

Autoren: Amal Charles, Ahmed Elkaseer, Mahmoud Salem, Lore Thijs, Steffen Scholz
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

Improving the dimensional accuracy of downfacing surfaces of additively manufactured parts

Autoren: Umberto Paggi, Mirko Sinico, Lore Thijs, Wim Dewulf, Brecht Van Hooreweder
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

New support structures for reduced overheating on downfacing regions of Direct Metal Printed parts

Autoren: Umberto Paggi, Rajit Ranjan, Lore Thijs, Can Ayas, Matthijs Langelaar, Fred Van Keulen, Brecht Van Hooreweder
Veröffentlicht in: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019, Ausgabe 2019, 2019, Seite(n) 1626-1640
Herausgeber: Solid Freeform Fabrication Symposium

Improving metal additive manufacturing part design and final part precision using feedback from X-ray computed tomography

Autoren: Markus Baier, Mirko Sinico, Umberto Paggi, Ann Witvrouw, Lore Thijs, Wim Dewulf, Simone Carmignato
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019, ISBN 978-0-9957751-5-2
Herausgeber: EUSPEN

Effect of process parameters on surface texture generated by laser polishing of additively manufactured Ti-6Al-4V

Autoren: dos Santos Solheid, Juliana; Elkaseer, Ahmed; Wunsch, Torsten; Charles, Amal; Seifert, Hans Jürgen; Pfleging, Wilhelm; Klotzbach, Udo [Hrsg.]; Kling, Rainer [Hrsg.]; Watanabe, Akira [Hrsg.]
Veröffentlicht in: Laser-based Micro- and Nanoprocessing XIV, Ausgabe 11268, 2020, ISBN 978-1-5106-3300-1
Herausgeber: SPIE LASE
DOI: 10.5445/ir/1000117583

Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts

Autoren: Shaheen A., Piano S., Sims-Waterhouse D., Bointon P., Leach R. K
Veröffentlicht in: Conference Proceedings : Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

Investigation on precision of laser powder bed fusion process using statistical process control

Autoren: Lokesh Chandrabalan, Emanuele Matoni, Martina Malarco, Eugenio Del Puglia, Luca Ammannato, Simone Carmignato
Veröffentlicht in: Conference Proceedings: Advancing Precision in Additive Manufacturing 2019, Ausgabe 2019, 2019
Herausgeber: EUSPEN

Thermomechanical modeling of additively manufactured structural parts - different approaches on the macroscale

Autoren: J Thorborg, P Esser, M Bayat
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe 861, 2020, Seite(n) 012008, ISSN 1757-899X
Herausgeber: IOP Publishing
DOI: 10.1088/1757-899x/861/1/012008

Axial calibration of an on-machine focus variation surface texture and form sensor

Autoren: Subbareddy Darukumalli, Teguh Santoso, Wahyudin P. Syam, Franz Helmli and Richard Leach
Veröffentlicht in: Euspen’s 20th International Conference & Exhibition, 2020
Herausgeber: Euspen

In-situ Laser Based Subtractive Manufacturing for Increased Precision of Metal Parts Produced by Laser Powder Bed Fusion

Autoren: Jitka Metelkova, Brecht Van Hooreweder, Ann Witvrouw.
Veröffentlicht in: 2021
Herausgeber: KU Leuven - Faculty of Engineering Science

External Shape Measurement for Industrial Applications Using Artificial Intelligence and Optimised Data Fusion

Autoren: Petros Stavroulakis, Danny Sims-Waterhouse, Amrozia Shaheen, Sofia Catalucci, Patrick Bointon, Elodie Doyen, Yael Bis Kong, Yorgos Tzimiropoulos, Richard Leach
Veröffentlicht in: Intelligent Systems and Applications - Proceedings of the 2018 Intelligent Systems Conference (IntelliSys) Volume 2, Ausgabe 869, 2019, Seite(n) 1273-1281, ISBN 978-3-030-01056-0
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-030-01057-7_96

Rechte des geistigen Eigentums

THREE DIMENSIONAL PRINTING SYSTEM WITH IMPROVED SURFACE PROPERTIES

Antrags-/Publikationsnummer: 19 183193
Datum: 2019-06-28
Antragsteller: LAYERWISE

Suche nach OpenAIRE-Daten ...

Leistungen

Veröffentlichungen

Rechte des geistigen Eigentums

Diese Seite teilen

Herunterladen