Pilot and demonstration project for processing iron oxides derived from HCl regeneration through rapid thermal treatment in a vertical shaft furnace

Projektinformationen

ID Finanzhilfevereinbarung: 7215-CA-118

Projekt abgeschlossen

Startdatum 1 Juli 1996

Enddatum 30 Juni 2000

Finanziert unter

• Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Gesamtkosten € 2 123 500,00

EU-Beitrag € 1 061 750,00

Koordiniert durch

EKO STAHL
Germany

Ziel

Large quantities of calcined iron oxide are obtained as a by-product of the regeneration of hydrochloric acid pickling solution and are currently used as an input material for producing hard or soft ferrites and paint pigments. Initial examinations have demonstrated the possibility of transforming this material into a high quality product for the production of hard ferrite by means of a short heat treatment in a vertical shaft furnace.

Programm/Programme

• ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Thema/Themen

• T1 - Iron and steelmaking

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

EKO STAHL

• EU-Beitrag: Keine Daten
• Adresse: Werkstrasse 1 ; 01220 EISENHÜTTENSTADT ; Deutschland
• Gesamtkosten: Keine Daten

Beteiligte (1)

VOEST-ALPINE STAHL LINZ

Österreich

• EU-Beitrag: Keine Daten
• Adresse: Turmstrasse 45 ; 4031 LINZ
• Gesamtkosten: Keine Daten