Skip to main content
DeutschDE
European Commission logo print header
Inhalt archiviert am 2022-11-21

Hot strip mill: camber measurement

Ziel

Camber is a geometrical defect that causes difficulties in guiding the product and can cause cracks in the tail ends of coils in finishers. Several causes can be the origin of this defect. Camber measurement in rolling mills does not exist, presently. Deviation measurement cannot give sufficient data because it does not take into account the possible uncontrolled movements of the product. This project intends to develop continuous camber measurements at the exit of the rougher, with a resolution of <2.5 mm/m, using several successive deviation measurement devices.

Programm/Programme

Thema/Themen

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

SOLLAC DUNKERQUE
EU-Beitrag
Keine Daten
Adresse
rue du Comte Jean Grande-Synthe
59381 DUNKERQUE CEDEX 1
Frankreich

Auf der Karte ansehen
Gesamtkosten
Keine Daten

Beteiligte (2)

Diese Seite teilen

Herunterladen

Letzte Aktualisierung: 13 Dezember 2002

Mein Booklet

Permalink: https://cordis.europa.eu/project/id/7215-PP-041/de

European Union, 2024