Demonstration of a high temperature metallic filter on sinter plant wind main gas

Obiettivo

In a previous ECSC-funded research project, the performances of a high- temperature metallic filter were investigated at a very small scale. The system was installed on a production plant and was shown to be capable of achieving outlet particulate concentrations of less than 10 mg/Nm3. Trace organic emissions were also reduced by injection of carbon-based adsorbents into the waste gas stream. The proposal is to build a larger scale plant and to install it on an operational sinter strand to further evaluate the performance of the filter under the conditions of continuous operation.

Programma(i)

ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Argomento(i)

T1 - Iron and steelmaking

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

CORUS UK LIMITED

Contributo UE

Nessun dato

Indirizzo

15 Great Marlborough Street
W1F 7AS LONDON
Regno Unito

Costo totale