European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS

Waste Heat Recovery in Industrial Drying Processes

Descrizione del progetto

Per un’essiccazione industriale competitiva ed ecocompatibile

L’essiccazione industriale consuma fino al 25% dell’energia totale utilizzata dal settore industriale europeo. Questa energia deriva principalmente dalla combustione di carburanti fossili, il che determina notevoli emissioni di carbonio e il rilascio di altri gas nocivi. Tali processi generano tuttavia anche una notevole quantità di calore di scarto a bassa temperatura, una risorsa attualmente inutilizzata. Il progetto DryFiciency, finanziato dall’UE, si propone di sviluppare e dimostrare sistemi di pompe di calore industriali ad alta temperatura. Si prevede che l’implementazione di questi sistemi consentirà di ottenere una riduzione nel consumo di energia impiegata nei processi di essiccazione industriale fino all’80%. Il progetto renderà possibile l’utilizzo di una pompa di calore a circuito chiuso per i processi di essiccazione ad aria e di una a circuito aperto per quelli basati sul vapore.

Obiettivo

The overall objective of the DryFiciency project is to lead energy-intensive sectors of the European manufacturing industry to high energy efficiency and a reduction of fossil carbon emissions by means of waste heat recovery to foster competitiveness, improve security of energy supply and guarantee sustainable production in Europe. The project addresses three sectors, namely brick, waste management and food industry. The results are however of major relevance for a number of other energy-intensive industries such as e.g. pulp and paper industry.
The DryFiciency consortium will elaborate technically and economically viable solutions for upgrading idle waste heat streams to process heat streams at higher temperature levels up to 160 °C. The key elements of the solution are three high temperature vapour compression heat pumps: two closed loop heat pump for air drying processes and one open loop heat pump for steam drying processes. The DryFiciency solution will be demonstrate under real production conditions in operational industrial drying processes in three leading European manufacturing companies from the food, brick and waste management industries.
The potential of the technology demonstrated is to reduce the specific energy demand for drying and dehydration from 700-800 kWh per ton down to 200 kWh per ton of evaporated water. The energy switch from fossil fuels towards heat pump technology reduces the environmental impact considerably and offers at the same time a potential for energy savings of up to 60-80 %. This will lead to substantial reduction of energy costs and consequently lower specific product costs resulting in a significantly improved competitiveness.

Invito a presentare proposte

H2020-EE-2016-2017

Vedi altri progetti per questo bando

Bando secondario

H2020-EE-2016-PPP

Meccanismo di finanziamento

IA - Innovation action

Coordinatore

AIT AUSTRIAN INSTITUTE OF TECHNOLOGY GMBH
Contribution nette de l'UE
€ 1 706 583,80
Indirizzo
GIEFINGGASSE 4
1210 Wien
Austria

Mostra sulla mappa

Regione
Ostösterreich Wien Wien
Tipo di attività
Research Organisations
Collegamenti
Costo totale
€ 1 916 298,75

Partecipanti (20)