High Performance Laser-based Additive Manufacturing

Projektinformationen

HIPERLAM

ID Finanzhilfevereinbarung: 723879

DOI

10.3030/723879

Projekt abgeschlossen

EK-Unterschriftsdatum 20 September 2016

Startdatum 1 November 2016

Enddatum 31 Januar 2020

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Gesamtkosten

€ 3 756 256,25

EU-Beitrag

€ 3 756 256,00

Koordiniert durch

ORBOTECH LTD
Israel

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (6)

Final Report

A public report of the HIPERLAM outcomes, based on 3rd Periodic internal report.

Technology Transfer Package

A package of technology transfer materials will be prepared. This will comprise technical specification documents for the LIFT laser printing and for the laser sintering & surface patterning processes, supported by case studies developed from the demonstrator applications

Report on Device Demonstrator RFID printed circuit laser printing and benchmarking evaluation performance

High-density antenna, printed by LIFT onto a flexible integrated circuit: track-width of 25μm, with spacing between pixels of 25um within a 2x2mm area.

Report on the selection of materials based on the inputs of the coating and the LIFT printing experiments

A report covering the printability, resolution and functionality of the preliminary selection of materials, based on the inputs of the coating and the LIFT printing experiments.

Training Plan

Courses will be organised to share with all participants’ detail information about the technologies exploited in the project.

Report on Device Demonstrator biometric sensor laser printing and benchmarking evaluation performance

Top pixel level printing by LIFT of the biometric demonstrator: closely spaced ITO pixels of 80x80μm with a spacing of 5μm on the top pixel dielectric of the sensor.

Other (1)

Nanoparticles Safety Instructions

Provide all Beneficiaries with all the safety precautions and Do's-and-Don'ts when using Nano materials in the lab. Periodically monitor all guidelines are met.

Websites, patent fillings, videos etc. (3)

Video presentation of the HIPERLAM project

Dissemination activities will be undertaken to promote the results and visibility of the project and of the Consortium

Demonstration of LIFT printing structures meeting end-users’ requirements

A set of functional materials and corresponding LIFT printing tests optimized to meet the requirements set by the end-user applications.

Project website established

This task focuses on preparing and running online the web site of the project

Veröffentlichungen

Peer reviewed articles (7)

Laser‐Induced Forward Transfer of High Viscous, Non‐Newtonian Silver Nanoparticle Inks: Jet Dynamics and Temporal Evolution of the Printed Droplet Study

Autoren: Ioannis Theodorakos, Agamemnon Kalaitzis, Marina Makrygianni, Antonios Hatziapostolou, Ayala Kabla, Semyon Melamed, Fernando de la Vega, Ioanna Zergioti
Veröffentlicht in: Advanced Engineering Materials, Ausgabe 21/10, 2019, Seite(n) 1900605, ISSN 1438-1656
Herausgeber: John Wiley & Sons Ltd.
DOI: 10.1002/adem.201900605

Copper micro-electrode fabrication using laser printing and laser sintering processes for on-chip antennas on flexible integrated circuits

Autoren: O. Koritsoglou, I. Theodorakos, F. Zacharatos, M. Makrygianni, D. Kariyapperuma, R. Price, B. Cobb, S. Melamed, A. Kabla, F. de la Vega, I. Zergioti
Veröffentlicht in: Optical Materials Express, Ausgabe 9/7, 2019, Seite(n) 3046, ISSN 2159-3930
Herausgeber: Optical Society of America
DOI: 10.1364/ome.9.003046

The effect of electromigration on the lifetime and performance of flexible interconnections fabricated by laser printing and sintering

Autoren: Kostas Andritsos, Ioannis Theodorakos, Filimon Zacharatos, Ioanna Zergioti
Veröffentlicht in: Applied Surface Science, Ausgabe 506, 2020, Seite(n) 144968, ISSN 0169-4332
Herausgeber: Elsevier BV
DOI: 10.1016/j.apsusc.2019.144968

Selective Laser Sintering of Laser Printed Ag Nanoparticle Micropatterns at High Repetition Rates

Autoren: Filimon Zacharatos, Ioannis Theodorakos, Panagiotis Karvounis, Simon Tuohy, Nuno Braz, Semyon Melamed, Ayala Kabla, Fernando de la Vega, Kostas Andritsos, Antonios Hatziapostolou, Dimitris Karnakis, Ioanna Zergioti
Veröffentlicht in: Materials, Ausgabe 11/11, 2018, Seite(n) 2142, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma11112142

Jetting dynamics of Newtonian and non-Newtonian fluids via laser-induced forward transfer: Experimental and simulation studies

Autoren: A. Kalaitzis, M. Makrygianni, I. Theodorakos, A. Hatziapostolou, S. Melamed, A. Kabla, F. de la Vega, I. Zergioti
Veröffentlicht in: Applied Surface Science, Ausgabe 465, 2019, Seite(n) 136-142, ISSN 0169-4332
Herausgeber: Elsevier BV
DOI: 10.1016/j.apsusc.2018.09.084

The role of laser pulse overlap in ultrafast thin film structuring applications

Autoren: R. Geremia, D. Karnakis, D. P. Hand
Veröffentlicht in: Applied Physics A, Ausgabe 124/9, 2018, ISSN 0947-8396
Herausgeber: Springer Verlag
DOI: 10.1007/s00339-018-2045-z

Investigation on high speed laser printing of silver nanoparticle inks on flexible substrates

Autoren: D. Tsakona, I. Theodorakos, A. Kalaitzis, I. Zergioti
Veröffentlicht in: Applied Surface Science, Ausgabe 513, 2020, Seite(n) 145912, ISSN 0169-4332
Herausgeber: Elsevier BV
DOI: 10.1016/j.apsusc.2020.145912