Objectif
Growing road traffic in Europe results in detrimental effects on the environment and public health to a level that is becoming unsustainable, this in spite of increasingly stringent emission standards. In particular, CO2 and noxious emissions are not sufficiently reduced in real driving, while higher injection pressures have led to a shift towards the emission of smaller nanoparticles that are undetected by current certification procedures.
The challenge of the DiePeR project is to apply advanced technologies for combustion and exhaust aftertreatment to existing non-hybrid Diesel engines and to optimize the improved characteristics of a new generation of engines with regard to emissions, fuel consumption and driveability. Specific technologies will be advanced to TRL 6 or TRL 7 and integrated in two demonstration vehicles: One passenger car of the mid/ premium segment and one light commercial vehicle. A full calibration and assessment of the vehicles and underlying technologies will take place to proof: Real driving emissions substantially below Euro 6/ NEDC limits, less than half of emitted particles (number) including particles < 23nm and a more than 5% improved fuel efficiency based on best-in-class MY2015 vehicles. The project also addresses design features, control and basic research such as modelling of particles formation and the deterioration of engine components (fuel injection system, exhaust aftertreatment system) and its effect on emissions, in order to assess the robustness of the vehicles over useful lifetime.
Champ scientifique
Mots‑clés
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
8020 Graz
Autriche
Voir sur la carte
Participants (16)
92100 Boulogne Billancourt
Voir sur la carte
92500 Rueil Malmaison
Voir sur la carte
46022 Valencia
Voir sur la carte
EC4A 4AB London
Voir sur la carte
31036 Toulouse
Voir sur la carte
70839 Gerlingen-Schillerhoehe
Voir sur la carte
00185 Roma
Voir sur la carte
9320 Arbon
Voir sur la carte
10156 Torino
Voir sur la carte
BN43 5FG Shoreham By Sea
Voir sur la carte
44321 Nantes Cedex 3
Voir sur la carte
92320 CHATILLON
Voir sur la carte
8010 Graz
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
2628 XJ Delft
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
10629 Berlin
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
10043 Orbassano
Voir sur la carte