Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-11-21

Reduction of noise from plasma torch used in continuous-casting tundish

Ziel

The project work had as first target the general acoustic characterisation of plasma torches system; in a second time peculiar acoustic reclamations were individualised and subsequently carried out in according to the examined plant.
The first objective has been realised carrying out a series of environmental noisiness measurements together with a simple acoustic model that enabled to point out the characteristics peak frequencies and the corresponding acoustic levels. In this way an average characteristics spectrum of the acoustic power emitted by the plasma torche source has been made; this spectrum can also be a reference for prevision about acoustic effects on different plants where the same thermic control system will be installed.

The second aim has been reached through the formulation of a simple system simulation model of acoustic effects on the surrounding areas together with intervention proposals concerning the tundish structure and geometry.

The progressive accomplishment of the solutions applicable to the plant engineering reality made possible to reduce the original total noisiness values from over 90 dBA to 81 / 82 dBA. These values are near the upper limits recommended by EEC directive n. 188 May 1986 concerning protection of work areas.
The research project will be broken down into the following phases:

Phase 1: Research on and quantification of noise sources

A phonometric survey will be performed to acquire the information needed to frame corrective action to be undertaken and to have comparative data for subsequent test work. Should the need arise intersymmetrical analysis may also be performed to identify possible preferential noise-propagation paths.

Phase 2: Analysis of plant operation and maintenance aspects

All necessary information will be collected to ensure that solution of the noise problem does not introduce others that are even more serious. Hence the functional aspects will be analysed, namely those bound up with the operator-plant relationship, while as regards the maintenance aspects, these will be tackled from two diverse aspects:

- plant-maintenance requirements
- life and maintenance of the noise-abatement works.

Plant data will be acquired through meetings with plant management and via the collection of photographic documentation and video-recordings.

Phase 3: Definition of abatement measures

All of the data collected will be processed or analysed to identify one or more possible solutions.

Phase 4: Implementation of abatement measures: noise tests

All the noise-abatement measures identified in the preceding phases will be implemented and a new series of tests will be run to check on their effectiveness.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

Daten nicht verfügbar

Koordinator

CENTRO SVILUPPO MATERIALI SPA
EU-Beitrag
Keine Daten
Adresse
Via di Castel Romano 100/102
ROMA
Italien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0