Ziel
The FReSMe project, From Residual Steel gases to Methanol, will produce a methanol that will be demonstrated in ship transportation. This green fuel will be produced from CO2, recovered from an industrial Blast Furnace, and H2 recovered both from the blast furnace gas itself, as well as H2 produced by electrolysis. The two different sources of H2 will enable (i) maximum use of the current residual energy content of blast furnace gas, while at the same time (ii) demonstrating a forward technology path where low carbon or renewable H2 become more ubiquitous.
The project will make use of the existing equipment from two pilot plants, one for the energy efficient separation of H2 and CO2 from blast furnace gas, and one for the production of methanol from a CO2-H2 syngas stream. This can be realised with a small amount of extra equipment, including supplemental H2 production from an electrolyser and a H2/N2 separation unit from commercially available equipment.
Methanol is a high volume platform chemical of universal use in chemical industry as well as applicable for fuelling internal combustion engines. As such it provides a promising pathway for the large scale re-use of CO2 to decarbonize the transportation and chemical sectors in Europe and decrease the dependence on fossil fuel imports. Production of methanol from CO2 offers the unique combination of scale, efficiency and economic value necessary to achieve large scale carbon reduction targets.
The pilot plant will run for a total of three months divided over three different runs with a nominal production rate of up to 50 kg/hr from an input of 800 m3/hr blast furnace gas. This size is commensurate with operation at TRL6, where all the essential steps in the process must be joined together in an industrial environment. The project will address the new integration options that this technology has within the Iron and Steel industry and contains supplementary and supporting research of underlying phenomena.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- Technik und TechnologieUmwelttechnikEnergie und Kraftstoffeerneuerbare Energie
- NaturwissenschaftenChemiewissenschaftenElektrochemieElektrolyse
- NaturwissenschaftenChemiewissenschaftenorganische ChemieAlkohole
- Technik und TechnologieChemieingenieurwesen
- Technik und TechnologieUmwelttechnikCO2-Abscheidetechnik
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Aufforderung zur Vorschlagseinreichung
(öffnet in neuem Fenster) H2020-LCE-2016-2017
Andere Projekte für diesen Aufruf anzeigenUnterauftrag
H2020-LCE-2016-RES-CCS-RIA
Finanzierungsplan
RIA -Koordinator
28050 Madrid
Spanien