Descrizione del progetto
Sistemi di monitoraggio dell’integrità per le trasmissioni degli aeromobili ad ala rotante
La scatola di trasmissione principale, o trasmissione, è una parte fondamentale dell’aeronavigabilità di un elicottero, in quanto controlla la velocità e fornisce la coppia ai rotori. Per una maggiore sicurezza, gli elicotteri sono dotati di un sistema di monitoraggio dell’utilizzo e dell’integrità (HUMS) che verifica le condizioni della trasmissione e prevede la vita utile residua dei componenti chiave. Tuttavia, gli HUMS esistenti potrebbero essere inadatti per le tecnologie dei materiali e di progettazione più avanzate nel campo degli aeromobili ad ala rotante. Pertanto, nell’ambito del programma Clean Sky 2, il progetto iGear, finanziato dall’UE, intende sviluppare un sistema di monitoraggio della salute strutturale adattato alle nuove tecnologie, che consenta di localizzare e individuare precocemente i guasti agli ingranaggi e ai cuscinetti basandosi su misurazioni delle vibrazioni, delle emissioni acustiche e delle caratteristiche dell’olio. Ciò consentirà agli operatori di pianificare strategie di manutenzione efficaci, aumentando al contempo la sicurezza degli aeromobili.
Obiettivo
The ultimate goal of the iGear (Intelligent Gearbox for Endurance Advanced Rotorcraft) project is the development of an on-the-fly Structural Health Monitoring (SHM). This innovative system will be applied to the lateral rotor gearboxes and engine to main gearbox reduction stages, in the framework of LifeRCraft demonstrator for the Fast Rotorcraft IADP. This topic is of high importance in order to promote enabling technologies for next generation gearboxes comprising new materials, namely composite or ceramic.
The primary objective of the iGear proposal is to assess technologies suitable to characterize health monitoring condition of gearboxes, mainly by enabling the provision of the localization and early detection of gearing and bearing failure. The ultimate goal is the early detection of on-going failures to allow for prompt maintenance or part replacement. This project inherits significant knowledge and developments made by Active Space Technologies and Cranfield University during former or ongoing research activities related to solutions performing in harsh environments, namely accelerometers, temperature detectors, and acoustic emission sensors.
In this project we will need an innovative approach to the use of ceramic ball bearings for the high speed shaft. The combination of vibration, oil analysis, among other technologies, will be used for both the Lateral Rotor Gearboxes and the Engine to Main Gearbox reduction stages. The key innovation we propose is the use of data fusion across condition indicators (Cis) to increase the robustness of diagnosis. We will seek to avoid excessive computation while maintaining traceability to acceptable rule-based diagnosis and probability, e.g. by adopting fuzzy logic for signal fusion. We will also examine the effectiveness of a system oriented approach, seeking to understand the sensitivities around the health state transitions, which must be transmitted to the user rather than solely focussing on damage measurements.
Campo scientifico
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftrotorcraft
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- engineering and technologymaterials engineeringceramics
- natural sciencescomputer and information sciencesdata sciencedata processing
Programma(i)
Argomento(i)
Meccanismo di finanziamento
CS2-IA - Innovation actionCoordinatore
MK43 0AL Cranfield - Bedfordshire
Regno Unito