Linking Zeolite Porosity to Molecular Diffusion at the Single Crystal Level

Projektinformationen

ZeoPoreDiff

ID Finanzhilfevereinbarung: 748563

DOI

10.3030/748563

Projekt abgeschlossen

EK-Unterschriftsdatum 27 Februar 2017

Startdatum 1 Juli 2017

Enddatum 30 Juni 2019

Finanziert unter

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Gesamtkosten

€ 177 598,80

EU-Beitrag

€ 177 598,80

Koordiniert durch

UNIVERSITEIT UTRECHT
Netherlands

Periodic Reporting for period 1 - ZeoPoreDiff (Linking Zeolite Porosity to Molecular Diffusion at the Single Crystal Level)

Berichtszeitraum: 2017-07-01 bis 2019-06-30

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Zeolites are porous materials, containing small channels in which molecules bounce back and forth untill they are converted into valuable products. However, due to the molecular size of these zeolite channels, molecules cannot travel inside the material, hindering reaction and the efficient use of the zeolite’s volume. Trial-and-error experimentation have learned that the access of molecules into the zeolite can be improved by generating highway inside the zeolite structure which can transport molecules through the zeolite framework. Yet, a fundamental understanding of this highway generation is still missing and impedes the rational design of the next generation of tailored zeolites. The goal of this project is to apply novel advanced microscopic techniques. A first microscopy-type develloped in this project relies on the scattering of X-rays by zeolite channels. By shining X-ray through the material with a microscope, the highway’s properties can be derived by catching the X-ray which have changed direction. As a second complementary technique, channel formation is monitored live in real-time by watching the highways being formed by placing molecules in the zeolite which lighten up at the channel contours. By applying this powerful combo, new vistas could open up on zeolite highway formation and the dynamics of their generation.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

First, X-ray scattering (SAXS) microscopy has been applied for the first time on heterogeneous catalysts, here zeolites in specific. Advanced data analysis protocols have been develloped for extracting the highway properties, hereafter termed ‘pore’ properties. Pores are only formed in selected parts of the zeolite. Particularly, in pore-rich zones, smaller pores of a few nanometers are observed at all locations in the zone, whereas larger pores only appear in selected hotspots. At these hotspots, a high concentration of needle-shaped pores occur. The application of X-ray scattering microscopy allowed to classify several types of pore zones, ranging from zone where no pores occur to regions where spherical and needle-type pores are formed.

Second, confocal fluorescence microscopy has been employing for capturing the dynamics of pore formation in real-time during the process. By staining the pores with fluorescent molecules, the pores could be visualized and their evolution monitored in live. Pore formation starts at the crystal surface and propagates towards the crystal core. The mechanism of pore formation can thus be defined as a initiation-propagation mechanism, triggered at the crystal edges. Finally, a clear structural correlation in the position of pore formation is observed between X-ray scattering and fluorescence microscopy, corroborating the results with both techniques.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

X-ray scattering microscopy has not been applied on heterogeneous catalysts and could potentially impact the field since it can visualize nanometer-sized pores over relatively large material volume. Strong electron microscopes can also visualize pores but only scan small volumes while other characterization techniques can screen larger material volume but are not sensitive enough to detect small pores. In this sense, X-ray scattering microscopy has been develloped as a novel tool for mapping porosity in heterogeneous materials, which provides strong opportunities for novel materials understanding and development. In addition, fluorescence microscopy has never been applied during the formation of nanometer-sized pores. Uncovering the formation mechanisms of this live monitoring can provide mechanistic knowledge, complementary to X-ray scattering microscopy, which can aid in generating next-level zeolites and heterogeneous catalysts.

While this is a fundamental science project aimed at further understanding the underlying mechanisms of nanopore formation in zeolites, the materials studied are of high value to society, and especially for developing more sustainable technologies. Specifically, the catalysts are essential for the methanol to hydrocarbons process, which can use renewable or non-renewable feedstocks to produce high demand chemical feedstocks, as well as automotive emissions reduction catalysts, vital to clean air. This is therefore directly in line with European policy objectives and strategies and will be essential for the competitiveness of the European chemical industry and economy.

Project overview