Objectif Complex high-value pieces are a growing field, particularly in high requirement sectors like the aeronautic, and especially in Europe, where 30-40% of worldwide manufacturing of these pieces is concentrated. Remarkable examples of these pieces are fuselage structures and complex pieces of the jet engines (large pieces with complex geometries, requiring (up today) several consecutive clamping-machining operations and several workholding fixtures). Actual clamping systems for these pieces (mechanical, electromagnetic and vacuum) are complex systems with some fixture-piece clamping elements which create the required union forces and are not fulfilling markets demands.FRESMAK in collaboration with POLYMAT (University of Basque Country), has developed an alternative innovative clamping solution, called TGRIP, based on the principle of reversible adhesion. The developed adhesive is a nanostructured bi-phase material with different adherence phases that is controlled with the temperature. Temperature governance allows to stick and unstick any kind of materials with a high clamping force and without compromising cutting areas.Main features of TGRIP that make it appropiate to respond to High Valued Complex Component clampling for machining needs that are not covered with existing solutions:• Adequate for complex high-value machining: High clamping force (1100N/cm2), Doesn’t damage neither deform pieces, Allows uniform adhesion distribution (Reduction of vibrations) Doesn’t compromise working areas, Works with any kind of material• Cost-effective technology (50%-70% cheaper than clamping alternatives): low technology, operation and maintence cost.• Environmentally friendly technology: Reusable and recyclable technology. Champ scientifique social sciencessociologygovernanceengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologymechanical engineeringmanufacturing engineeringsubtractive manufacturingnatural sciencesmathematicspure mathematicsgeometryengineering and technologymaterials engineeringceramics Programme(s) H2020-EU.2.1.2. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies Main Programme H2020-EU.2.1.5. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing H2020-EU.2.1.3. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Thème(s) SMEInst-02-2016-2017 - Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs Appel à propositions H2020-SMEInst-2016-2017 Voir d’autres projets de cet appel Sous appel H2020-SMEINST-2-2016-2017 Régime de financement SME-2 - SME instrument phase 2 Coordinateur FRESMAK SA Contribution nette de l'UE € 1 374 454,00 Adresse ARABA KALEA 45 20800 ZARAUTZ Espagne Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Noreste País Vasco Gipuzkoa Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Liens Contacter l’organisation Opens in new window Site web Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 1 963 506,25
