Development of novel and cost effective corrosion resistant coatings for high temperature geothermal applications

Projektinformationen

Geo-Coat

ID Finanzhilfevereinbarung: 764086

DOI

10.3030/764086

Projekt abgeschlossen

EK-Unterschriftsdatum 13 April 2018

Startdatum 1 Februar 2018

Enddatum 31 Mai 2021

Finanziert unter

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Gesamtkosten

€ 4 722 722,50

EU-Beitrag

€ 4 722 722,50

Koordiniert durch

TWI LIMITED
United Kingdom

Periodic Reporting for period 2 - Geo-Coat (Development of novel and cost effective corrosion resistant coatings for high temperature geothermal applications)

Berichtszeitraum: 2019-08-01 bis 2021-05-31

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Geo-Coat is an EU-funded collaborative project that has investigated newly developed coatings and Metal Matrix Composite bulk materials for use in high erosion and corrosion environments. Specifically, the project has focused on improving the lifetime of materials used in plants for geothermal energy production by the use of specialized coatings. The Geo-Coat project has worked towards the following main objectives:

a) to capture, rationalise and model the design requirements for a range of geothermal components and environments spanning the European arena, based on the common degradation mechanisms experienced (i.e. corrosion, erosion and scaling);
b) to develop specialised corrosion- and erosion- resistant coatings, based on selected High Entropy Alloys (HEAs) and Ceramic/Metal mixtures (Cermets), to be applied through thermal powder deposition techniques (primarily high velocity oxy-fuel spray HVOF and Laser cladding) specifically tuned to provide the required bond strength, hardness and density for the challenging environments experienced in geothermal applications;
c) to develop improved models for efficient identification of optimal design requirements, modelling the chemistry and physics of corrosive and erosive forces at points along the process flow;
d) to develop a design Decision Support System (DSS) tool to produce reliable lifecycle estimates for performance, operational costs, environmental impact and risk. This tool will be developed with data from models and experimental database.

Following the conclusion of project activities towards the above mentioned objectives, it can be demonstrated that:
1) Geo-Coat has developed coating materials (based on High Entropy Alloys) and methodology combination for each of six types of substrates for application (pipes and casing, valves, turbines, pump impellers and heat exchangers) based on the performance in corrosion and mechanical tests.
2) A Knowledge Based Engineering (KBE) tool as part of implementation of a knowledge-based materials design system and a multi-phase, multi-component and dynamic flow assurance simulator for geothermal energy.
3) Identification of two key flagship projects, commercially viable coatings based on HEAs with exploitation potential.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

A summary of the key results:
• Identification of best coating material (based on High Entropy alloys) and methodology combination for each of six types of substrates for application (pipes and casing, valves, turbines, pump impellers and heat exchangers) based on the performance in corrosion and mechanical tests. See table Geo-Coat coatings (KBE tool, accessed via https://www.geo-coat.eu )
• Development and improvement of multi-phase, multi-component and dynamic flow assurance simulator for geothermal energy. Models for calculation of corrosion, erosion and scaling rates have been developed and implemented. These can be accessed via http://www.flowphys.com/software.html.
• Development and implementation of a knowledge-based materials design system, a Knowledge Based Engineering (KBE) tool. The tool has been designed and populated with the experimental and numerical data generated as part of the project activities. The KBE functionalities can be accessed via ‘KBE tool’ tab on https://www.geo-coat.eu/
• Demonstration of sustainability and lower environmental impact, of laser cladded High Entropy Alloys (HEA2) Geo-Coat coating system for geothermal application via Life Cycle Analysis (LCA). The graphical user interface (GUI) for the LCA tool can be accessed via project website.
• Demonstration of cost and performance optimisation of Geo-Coat materials through Levelised Cost Of Energy(LCOE)models. These studies reveal that the best ranked Geo-Coat system for most applications, LC-HEA2, has potential to reduce costs for geothermal plants.
• The environmental and economic sustainability models (LCA and LCOE) demonstrate the impact of the Geo-Coat technology on the sustainability of geothermal power plants in the European and global scenario. The analysis shows that the innovation brought in by the Geo-Coat technology can make geothermal power more sustainable and affordable.
• Identification of two key flagship projects, commercially viable coatings based on HEAs with exploitation potential:
1) Geo-Coat developed coated carbon steel-LC_HEA with capability to address corrosion issues in surface pipes
2) Geo-Coat developed coated stainless steel –LC_HEA with capability to address erosion and corrosion issues in steam turbines components.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

The progress made beyond the state-of-the-art by the project can be summarised in the main following points:
• Development of innovative materials to address materials challenges in geothermal industry. The Geo-Coat project has identified best coating material (based on High Entropy alloys and methodology combination for each of six types of substrates for application (pipes and casing, valves, turbines, pump impellers and heat exchangers) based on the performance in corrosion and mechanical tests. See table on Geo-Coat coatings (KBE tool, accessed via https://www.geo-coat.eu )
• Maintenance and improvement of competitiveness and sustainability of the European geothermal industry. LCA analysis calculations reveals sustainability with lower environmental impact for Geo-Coat developed coatings. See report on Impact of Geo-Coat application on environmental footprint on geothermal power (https://www.geo-coat.eu/outreach)
• Demonstration of reduction in costs via LCOE models for Geo-Coat coatings. See report on Impact of Geo-Coat application on LCOE (https://www.geo-coat.eu/outreach)

GeoCoat logo