Leistungen
Earthquakes recorded during the field operations are used to update the coefficients of a reference GMPE with the aim of refining the estimation of the ground motion and reduce the associated uncertainties.
Workflow for the installation of gas sensing equipment on siteThis report will describe how the new spectroscopy-based instrument setups may be cross-calibrated and optimised across field sites to quantify gas, to derive gas flux, and how systems may be integrated with existing sensors, or optimised to monitor environmental leaks or bursts of gas activity from natural and engineered structures. This could be used for precise continuous environmental near-surface gas monitoring at field sites before, during and after operation.
Models for decay of cement based concrete samplesMolecular modeling using the reactive ReaxFF approach will be performed to identify and quantify the atomistic mechanisms of decay and failure of cement-based materials in contact with host rocks. Cement and concrete compositions of higher durability for the specific geological conditions of interest and various sub-surface operations will be proposed based on the molecular simulation reaults.
Demonstration of the LCA software against field dataTWI to develop a new tool to interface with commercial software (e.g., GaBi) and allow further analysis based on the outcomes and best practice developed. The features of such tool will be a user-interface for entering relevant data, computational modul implemented and output module presenting the results. This software will be then demonstrated using filed data.
Case study integration of multi-risk and LCA assessments for sub-surface geo-energy systemsIntegration of a holistic, risk-based, life cycle assessment in which the LCA process fully contemplates assessing and managing risks. This will be accomplished by developing an interface between the LCA and the MR assessments.
Model for circulation of toxic metals in groundwater near selected field sitesBuilding on Deliverable 4.5, this report will also inlcude the distribution and the transport of toxic metals in the subsurface, with emphasis on the field test site considered in Task 4.6.
Early- Project Report on Ethical ConductThis report will describe strategies used in the project to optimise our dissemination strategies towards enhancing the impact of our consortium while maintaining high level of ethical integrity. If relevant, encountered risks of unethical conduct and preventive solutions will also be reported
Quantification of the biological activity of microbial samples from selected field sitesAnalysis of metagenomes and metatranscriptomes to quantify microbiological activity and to design culture medium that enhances growth of several groups of deep sea Archaea and Bacteria.
Workflow for gene screening, metagenomic libraries construction and NGS sequencingStandardization of metagenomic material extraction, DNA quality control, metagenomic library construction and quality assessment, 16S rDNA and functional genes libraries survey and NGS sequencing
Integrating multi-risk and LCA assessments for energy production systemsDevelopment of a framework for multi-hazard and multi-risk assessment exploring possible cascading effect scenarios and the conditions under which the exploitation of such unconventional resources may drive to undesired consequences.
Quantification of CO2 fixation in CarbFix samples under various geological conditionsThis report will summarise the experimental evidence, both from field observation and from lab analysis, regarding the possible fixation of CO2 into minerals.
Sample rock physical and chemical characterisation, including pore networkRock samples will be characterised at the microscale using electron-beam surface analysis such as Qemscan for mineral assignments, 3D texture analysis using x-ray tomography and oriented permeability and porosity using experimental rock physics laboratories at UCL. This report will provide this data for samples from the different field sites, and comparisons with European and N American data as part of a large rock core library managed by UCL.
Workflow for adsorption experiments on samples at geologic temperature and pressure conditionsBecause of the relatively weak affinity of gases to geological (natural) samples as compared to commercial adsorption materials, the work will initially focus on the development of an appropriate experimental protocol to achieve the required measurement reproducibility. By profitably selecting different vapors the possibility will be investigated of accessing pore space with distinct wettabilities, a feature that may prove to be particularly beneficial for the characterization of mixed-wet systems.
Workflow for the installation of sensing skins on siteThis report will describe the procedure of applying an electrically based sensing skin on-site, for detecting cracks on the surfaces of solid structures. The selection of materials, measurement techniques and computational methods for data-analysis will be covered in the report.
Multi-scale models of fluid behaviour in cement and rock samplesKinetic Monte Carlo and other multi-scale modeling approaches will be used to up-scale the molecualr modeling results of D5.1 and to allow a multi-scale quantification of fluid transport in cement. The same approach will be used to characterize the fluid behavior in host rocks. The model describing the transport of tracers in porous materials, and how it is able to reproduce experimental data from lab testing experiments, will also be described in this deliverable.
Full dataset on encapsulated silica DNA-tracer stability and flow behaviour under selected conditionsDevelopment of novel core/shell silica encapsulated DNA-tracers and testing of the properties (stability, flow behaviour).
Protocols for Emergency Response, Mitigation and RemediationA specific set of guidelines will be developed gathering the knowledge, experience and best practice for managing leakage events for each technology. Specifically identifying a range of different failure modes and how they would be detected and the protocols following each type of event.
Groundwater Remediation ProtocolsThis report includes best practice recommendations for procedures to follow to remediate groundwater, in the event sub-surface geo-energy operations have contaminated it.
Report on tracking fluid pathways and rapid fluid transportThis report will summarise the results achieved within Task 6.5. The report will identify procedures for the assessment of the probability of rapid fluid coupling, and that for the identification of fluid pathways in rockmass.
Final Report on Ethical ConductThis report will summarize strategies used in the project to prevent from dual and misuse use of research activities, defensive/offensive use and sensational interpretation of data along with inconsistent practices of non-EU countries with respect to the EU norms and regulations. If relevant, encountered risks of unethical conduct and preventive solutions will also be reported.
Mid-Project Report on Ethical ConductThis report will describe strategies used in the project to optimise our dissemination strategies towards enhancing the impact of our consortium while maintaining high level of ethical integrity. If relevant, encountered risks of unethical conduct and preventive solutions will also be reported
Report on the bio-degradability and bio-accumulation of 5 DNA-based particle tracersReport on distribution and estimated lifetime of the novel silica based tracers in the environment. First assessment of ecotoxicity of tracers. Measures to adjust the eco-half life of the tracers in the environment will be elaborated.
Methane and ethane gas analysis in combination with carbon dioxide isotope analysis at specific locationsThis report will describe selection criteria for gas samples from field sites using their chemical and isotopic characteristics in the context of their 3D subsurface source(s). A subset of gas (especially methane) samples will be analysed using new mass spectrometer-based isotopologue instrument in USA, and assessed for the viability of this method in discriminating between natural and anthropogenic sources of gas in the European environment.
Final Report on Public Response to S4CE ActivitiesEngagement widely with stakeholders through project website, e-newsletters, dissemination activity. Forum with stakeholder, academia, regulators, governments.
Validation of sensing skin and well integrity monitoring techniques on field sitesTWI to validate the SHM system (developed in D 6.3) under operational conditions at the CO2 storage injector/producer at the Rusanda site and geothermal well at St Gallen. This report will describe the results of on-site integrity monitoring tests. For the electrically based sensing skin technique, these are the first on-site tests, and the main focus will be on testing the tolerance of the sensing skin to changing environmental
Modelling results of fluid pathways in cement based concrete samples and rock samplesUsing the ClayFF parameterization of interatomic interactions, new molecular scale models of fluid-cement interfaces will be developed. Atomistic simulations will be used to quantitatively assess the preferential surface adsorption (e.g., water and ions as opposed to CO2 ), to further quantify transport mechanisms of fluid components in cementitious materials.
Development of groundwater conceptual and numerical circulation modelThis report will focus on the field site charcaterization conducted as described in Task 4.6. The report will include the interpretation of the experimental data, as well as a conceptual rendering of the field site inclusive of geological features and will then provide a numerical model to describe the circulation of groundwater around the site.
Determination of biological samples identity for samples collected from field sitesReport will provide a description of the microbial communities found in field samples and an assessment of their role and reactivity during the storage operations. This will be based on using molecular survey of 16S rDNA and functional genes that would allow to infer metabolisms.
Validation of the fluid migration models based on field site dataThe report will describe the fluid migration models for drilling, testing and circulation. Derived predictions of fluid migration are tested and validated through micro-seismic and hydraulic test data.
Final Report on Summer Outreach EventsReport describing attendees, their backgrounds, and their success during attendance to summer outreach events such as Summer Challenge and Sumer Schools
Workflow for the implementation of novel well integrity monitoring techniquesTWI to develop a Structural Health Monitoing (SHM) system which includes Acoustic Emission, Vibration Analysis and Guided Wave Ultrasonics techniques in order to gather, process and interpret data which provide essential information on the integrity of the wells tubings and casings. The SHM system will then be validated via laboratory trials.
Validation of model for fluid migration against field-site dataPredictions made from the fluid migration models are tested and validated against micro-seismic and hydraulic data. The models will be adjusted as appropriate to fit the field-site data. Geomecon : geomecon will employ a software package based on the eXtended FEM (XFEM), i.e., roxolTM to simulate the propagation, initiation and reactivation of fractures; the software offers the unique possibility to understand the fracturing process during hydraulic fracturing campaigns applied in the extraction of unconventional oil and gas, which will enable the safe deployment of geo-energy operations in Europe. Within S4CE the software package will be calibrate against the existing well characterised data set from St. Gallen inclusive of data before, during and after gas production to gain further insight into the observed induced seismicity and allow explicit models of fracture propagation and fluid transport in sub-surface formations. These models are than implemented into large-scale fully coupled thermal-hydro-mechanical simulations using COMSOL Multiphysics, a finite element code, on the St Gallen data set to evaluate whether poroelastic effects or fast fluid flow along fractures caused the induced seismicity in St Gallen.
Seismic methodology for assessing the probability of rapid fluid transportApplication of methodologies developed for the volcanic environment to the fluid-solid coupling of two phases fluid (gas and water) during subsurface geo-engineering efforts.
Proof of concept laboratory demonstration of a EIT based sensing skin for well cap structuresIn this report, a laboratory demonstration of electrically based sensing skin for monitoring well cap structures will be provided. The main focus in on the detection of surface breaking cracks on large scale. Secondly, the possibility of detecting the presence of supercritical CO2 will be investigated.
Enrichment and isolation of key metabolically active microorganismsIdentify and sequence the whole genome of up to 5 new metabolic groups of Archaea and Bacteria involved in sulfur and/or carbon cycles.
Project Management PlanThis report will contain general operational information including the Gantt chart and a Work Breakdown Structure (WBS), reporting processes, planning and protocols for communication within the consortium, quality control processes, risk logs and the procedures for risk monitoring, decision-making and conflict resolution, templates, etc. A second release is foreseen at month 22.
Best Practice Procedures for Sub-Surface Geo-Energy OperationsA set of best practice procedures will be developed focusing on the through life design and management methodologies to minimize the environmental, technical and societal risks for each subsurface technique.
Workflow for Students and Post-Doctoral Researchers EU – North American ExchangesDescription of accepted processes to facilitate international personnel exchanges.
S4CE Database on Is-Epos platform – Evaluation ReportThis report will explain the content of the database platform developed in conjunction with our collaborators, will assess the reliability of the data, will contain the procedures for assessing the data and for adding additional data in the future. The report will also document how effective the data repository has been for the applications proposed by the consortium, and whether others have accessed the data in the database during the length of the project.
Report on the capability of studying rock samples at variousTo quantify how rock-characterisation and fluid composition data change as a function of the pressure, S4CE will design and construct the laboratory apparatus that will allow us to connect to the high-pressure samples. The advanced high-pressure laboratory equipment is designed to replicate both (i) deep subsurface reservoir conditions and (ii) the transport of samples to the surface (decompression) to quantify gas release (hydrocarbons, gas content) and monitor the physical changes of gas-shale rock during decompression. S4CE will test the depressurisation method on synthetic /alternative samples in order to demonstrate the technique. This includes pressurising regular shale samples with known quantities of gas, and then decompressing them as planned in our custom-built equipment to quantify the amount of gas that would be extracted. The report will describe the site selection and subsurface geology providing context to the sample acquisition with this procedure, as well as a characterisation of the samples themselves.
Set of adsorption isotherms combined with permeability for selected rock samplesStatic adsorption experiments will be conducted by using different gases (e.g., CO2 and light hydrocarbons) and two different techniques, namely a gravimetric method (High-Pressure Rubotherm Magnetic Suspension Balance) and a recently developed imaging-based method that uses X-ray micro CT. Experiments will be performed using various rock types, including carbonates with significant microporosity, shale and cements.
Model for fluid migration in the subsurfaceTo monitor fluid migration, the occurrence of induced seismicity as a signature for the local increase of hydraulic pressure will be used to map relative and absolute pressure changes over time. The derived model will permit fluid flow mapping in the subsurface during drilling (by drilling mud pressure, kicks and loss of fluid), testing, hydraulic stimulation and geothermal circulation.
PUSH50 pressurised biological samplesThis report will describe the procedures implemented for collecting and retrieving biological samples from formation conditions and what is done to maintain the samples at formation conditions while being transported. If possible, the report will also include the processes to transfer the samples from the PUSH 50 instrument to the characterization instruments.
Microbe and mineral assemblages and reactivity to gas injection from field samplesThis report will gather observations made at the microscale to characterize the interactions between microorganisms and rocks/minerals. This will be done by combining high resolution spectroscopic and imaging techniques (FISH/CLSM experiments coupled with Raman/FTIR microscopy along with electronic microscopy) with laser capture microdissection and single-cell genomic.
Workflow on testing fluid transport properties of cement based samples by electrical imagingThis report will provide results of testing the feasibility of electrical imaging (ERT and/or ECT) for monitoring fluid flows in cement-based materials. Description of laboratory experiments for testing the transport properties of the materials will be provided. The special focus is on monitoring distributions of supercritical CO2 in concrete materials used in casings.
Gas sensor performance quantitative assessment and associated operation protocolsA report for the laboratory calibration and performance of the new gas spectroscopy instruments (D3.3, D3.4) against standard gases and gas mixtures within the dynamic range and large variation in gas concentrations expected across the different field site environments. This may include measures of reproducibility and time series analysis at outdoors test sites under different atmospheric and climatic conditions.
Policy recommendations for the environmentally conscious deployment of sub-surface operationsThose set of protocols (from D8.3) will be gathered by TWI to provide the basis of operator policies and procedures and inform government authorities and regulatory bodies when setting legislation for each technology.
Models for CO2 carbonation in various environments and in the presence of H2O and H2SThe ReaxFF approach will be used to develop a theoretical understanding of the molecular mechanisms for CO2 fixation in sub-surface formations. This will require the parameterization of ReaxFF force fields for the given environments, relying on DFT reference data, as well as the extension of ReaxFF to sufficiently long time scales to be experimentally relevant.
Final Report on Work-In-Progress Forums and Geo-Energy Information-Exchange MeetingsThis report will document the effectiveness of our dissemination and cross-pollination events, and how information and best-practice procedures have been transferred from North America to European operations, and vice versa.
Action Plan for SuccessionThis report will document suggestions for continuing the scientific operations enabled by the S4CE consortium within the scopes of Horizon 2020.
Validation of gas sensors on field sitesThe operation and data gathered from new gas sensor instruments will be reported for different field sites, encompassing the quantitative gas response to a wide range of different sources, collected under different environmental conditions. The report will describe how the instruments are validated.
This report will include details on the process for designing and setting up the project website.
Veröffentlichungen
Autoren:
Andrea Paulillo, Aberto Striolo, Paola Lettieri
Veröffentlicht in:
Environment International, Ausgabe 133, 2019, Seite(n) 105226, ISSN 0160-4120
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.envint.2019.105226
Autoren:
P. Cusano, S. Petrosino, E. De Lauro, M. Falanga
Veröffentlicht in:
Journal of Volcanology and Geothermal Research, Ausgabe 389, 2020, Seite(n) 106693, ISSN 0377-0273
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jvolgeores.2019.106693
Autoren:
Stanislav Mazurenko, Jyrki Jauhiainen, Tuomo Valkonen
Veröffentlicht in:
ETNA - Electronic Transactions on Numerical Analysis, Ausgabe 52
journal
refereed
28, 2020, Seite(n) 509-552, ISSN 1068-9613
Herausgeber:
Kent State University
DOI:
10.1553/etna_vol52s509
Autoren:
Tran Thi Bao Le, Alberto Striolo, David R. Cole
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 123/43, 2019, Seite(n) 26358-26369, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.9b07344
Autoren:
Andrea Paulillo, Lucy Cotton, Ryan Law, Alberto Striolo, Paola Lettieri
Veröffentlicht in:
Journal of Cleaner Production, Ausgabe 249, 2020, Seite(n) 119410, ISSN 0959-6526
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jclepro.2019.119410
Autoren:
Elvira Battimelli, Guido Maria Adinolfi, Ortensia Amoroso, Paolo Capuano
Veröffentlicht in:
Seismological Research Letters, 2019, ISSN 0895-0695
Herausgeber:
Seismological Society of America
DOI:
10.1785/0220190048
Autoren:
Tran Thi Bao Le, Alberto Striolo, David R. Cole
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 124/34, 2020, Seite(n) 18532-18543, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.0c03210
Autoren:
C.Sanchez-Roa, G. D. Saldia, T. M. Mitchell, F. Iacoviello, J. Bailey, P. R. Shearing, E. H. Oelkers, P. G. Meredith, A. P. Jones, A. Striolo
Veröffentlicht in:
Earth and Planetary Science Letters, 2021, ISSN 0012-821X
Herausgeber:
Elsevier BV
DOI:
10.1016/j.epsl.2020.116641
Autoren:
Siddharth Gautam, Tran Thi Bao Le, Gernot Rother, Niina Jalarvo, Tingting Liu, Eugene Mamontov, Sheng Dai, Zhen-An Qiao, Alberto Striolo, David Cole
Veröffentlicht in:
Physical Chemistry Chemical Physics, Ausgabe 21/45, 2019, Seite(n) 25035-25046, ISSN 1463-9076
Herausgeber:
Royal Society of Chemistry
DOI:
10.1039/c9cp04741g
Autoren:
Andrea Paulillo, Lucy Cotton, Ryan Law, Alberto Striolo, Paola Lettieri
Veröffentlicht in:
Data in Brief, Ausgabe 29, 2020, Seite(n) 105117, ISSN 2352-3409
Herausgeber:
Elsevier BV
DOI:
10.1016/j.dib.2020.105117
Autoren:
Andrea D'Aniello, Massimiliano Fabbricino, Daniela Ducci, Domenico Pianese
Veröffentlicht in:
Groundwater, Ausgabe 58/4, 2020, Seite(n) 598-610, ISSN 0017-467X
Herausgeber:
National Ground Water Association
DOI:
10.1111/gwat.12943
Autoren:
Deirdre E. Clark, Eric H. Oelkers, Ingvi Gunnarsson, Bergur Sigfússon, Sandra Ó. Snæbjörnsdóttir, Edda S. Aradóttir, Sigurður R. Gíslason
Veröffentlicht in:
Geochimica et Cosmochimica Acta, Ausgabe 279, 2020, Seite(n) 45-66, ISSN 0016-7037
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.gca.2020.03.039
Autoren:
Sudeshna Basu, Adrian Jones, Pedram Mahzari
Veröffentlicht in:
Journal of Marine Science and Engineering, Ausgabe 8/2, 2020, Seite(n) 136, ISSN 2077-1312
Herausgeber:
MDPI
DOI:
10.3390/jmse8020136
Autoren:
Pedram Mahzari, Adrian P. Jones, Eric H. Oelkers
Veröffentlicht in:
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2020, Seite(n) 1-21, ISSN 1556-7036
Herausgeber:
Taylor & Francis
DOI:
10.1080/15567036.2020.1815907
Autoren:
Junyoung Hwang, Ronny Pini
Veröffentlicht in:
Environmental Science & Technology, Ausgabe 53/19, 2019, Seite(n) 11588-11596, ISSN 0013-936X
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.est.9b03638
Autoren:
Roberta Esposito; Paolo Capuano; Raffaella De Matteis; Vincenzo Convertito
Veröffentlicht in:
Acto Geophysica, Ausgabe 68, 723–735, 2020, ISSN 1895-7455
Herausgeber:
Springer
DOI:
10.1007/s11600-020-00441-0
Autoren:
Sakiru B. Badmos, Tai Bui, Alberto Striolo, David R. Cole
Veröffentlicht in:
The Journal of Physical Chemistry C, 2019, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.9b04247
Autoren:
Philip A. E. Pogge von Strandmann, Kevin W. Burton, Sandra O. Snæbjörnsdóttir, Bergur Sigfússon, Edda S. Aradóttir, Ingvi Gunnarsson, Helgi A. Alfredsson, Kiflom G. Mesfin, Eric H. Oelkers, Sigurður R. Gislason
Veröffentlicht in:
Nature Communications, Ausgabe 10/1, 2019, ISSN 2041-1723
Herausgeber:
Nature Publishing Group
DOI:
10.1038/s41467-019-10003-8
Autoren:
Azeezat Ali, Tran Thi Bao Le, Alberto Striolo, David R. Cole
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 124/45, 2020, Seite(n) 24822-24836, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.0c07621
Autoren:
Grazia De Landro, Ortensia Amoroso, Guido Russo, Aldo Zollo
Veröffentlicht in:
Energies, Ausgabe 13/22, 2020, Seite(n) 5878, ISSN 1996-1073
Herausgeber:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en13225878
Autoren:
Dian Fan; Anh Phan; Alberto Striolo
Veröffentlicht in:
Journal of Natural Gas Science and Engineering , 73 , Article 103049. (2020) (In press)., Ausgabe 5, 2020, ISSN 1875-5100
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jngse.2019.103049
Autoren:
Nitin Sharma, Vincenzo Convertito
Veröffentlicht in:
Bulletin of the Seismological Society of America, Ausgabe 108/6, 2018, Seite(n) 3645-3655, ISSN 0037-1106
Herausgeber:
Seismological Society of America
DOI:
10.1785/0120170350
Autoren:
Sigurdur R. Gíslason, Hólmfrídur Sigurdardóttir, Edda Sif Aradóttir, Eric H. Oelkers
Veröffentlicht in:
Energy Procedia, Ausgabe 146, 2018, Seite(n) 103-114, ISSN 1876-6102
Herausgeber:
Elsevier
DOI:
10.1016/j.egypro.2018.07.014
Autoren:
J. Hwang, L. Joss, R. Pini
Veröffentlicht in:
Microporous and Mesoporous Materials, Ausgabe 273, 2019, Seite(n) 107-121, ISSN 1387-1811
Herausgeber:
Elsevier BV
DOI:
10.1016/j.micromeso.2018.06.050
Autoren:
Sandra Ó. Snæbjörnsdóttir, Sigrún Tómasdóttir, Bergur Sigfússon, Edda Sif Aradóttir, Gunnar Gunnarsson, Auli Niemi, Farzad Basirat, Benoît Dessirier, Sigurdur R. Gislason, Eric H. Oelkers, Hjalti Franzson
Veröffentlicht in:
Energy Procedia, Ausgabe 146, 2018, Seite(n) 146-157, ISSN 1876-6102
Herausgeber:
Elsevier
DOI:
10.1016/j.egypro.2018.07.019
Autoren:
Narasimhan Loganathan, Geoffrey M. Bowers, A. Ozgur Yazaydin, Andrey G. Kalinichev, R. James Kirkpatrick
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 122/41, 2018, Seite(n) 23460-23469, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.8b06602
Autoren:
Ingvi Gunnarsson, Edda S. Aradóttir, Eric H. Oelkers, Deirdre E. Clark, Magnús Þór Arnarson, Bergur Sigfússon, Sandra Ó. Snæbjörnsdóttir, Juerg M. Matter, Martin Stute, Bjarni M. Júlíusson, Sigurður R. Gíslason
Veröffentlicht in:
International Journal of Greenhouse Gas Control, Ausgabe 79, 2018, Seite(n) 117-126, ISSN 1750-5836
Herausgeber:
Elsevier BV
DOI:
10.1016/j.ijggc.2018.08.014
Autoren:
Maria Apostolopoulou, Ron Dusterhoft, Richard Day, Michail Stamatakis, Marc-Olivier Coppens, Alberto Striolo
Veröffentlicht in:
International Journal of Coal Geology, Ausgabe 205, 2019, Seite(n) 140-154, ISSN 0166-5162
Herausgeber:
Elsevier BV
DOI:
10.1016/j.coal.2019.02.009
Autoren:
Narasimhan Loganathan, Geoffrey M. Bowers, Brice F. Ngouana Wakou, Andrey G. Kalinichev, R. James Kirkpatrick, A. Ozgur Yazaydin
Veröffentlicht in:
Physical Chemistry Chemical Physics, Ausgabe 21/13, 2019, Seite(n) 6917-6924, ISSN 1463-9076
Herausgeber:
Royal Society of Chemistry
DOI:
10.1039/c9cp00851a
Autoren:
Deirdre E. Clark, Ingvi Gunnarsson, Edda S. Aradóttir, Magnús Þ. Arnarson, Þorsteinn A. Þorgeirsson, Sigrún S. Sigurðardóttir, Bergur Sigfússon, Sandra Ó. Snæbjörnsdóttir, Eric H. Oelkers, Sigurður R. Gíslason
Veröffentlicht in:
Energy Procedia, Ausgabe 146, 2018, Seite(n) 121-128, ISSN 1876-6102
Herausgeber:
Elsevier
DOI:
10.1016/j.egypro.2018.07.016
Autoren:
Stefan Baisch
Veröffentlicht in:
Journal of Geophysical Research: Solid Earth, Ausgabe 125/8, 2020, ISSN 2169-9313
Herausgeber:
AGU
DOI:
10.1029/2019jb019070
Autoren:
Jorge R. Osman, Hervé Cardon, Gilles Montagnac, Aude Picard, Isabelle Daniel
Veröffentlicht in:
Environmental Microbiology Reports, 2021, ISSN 1758-2229
Herausgeber:
Wiley-Blackwell
DOI:
10.1111/1758-2229.12922
Autoren:
Pedram Mahzari, Thomas M. Mitchell, Adrian P. Jones, Eric H. Oelkers, Alberto Striolo, Francesco Iacoviello, Paul R. Shearing, Juan Ernesto Juri
Veröffentlicht in:
Fuel, 2021, ISSN 0016-2361
Herausgeber:
Elsevier BV
DOI:
10.1016/j.fuel.2020.118950
Autoren:
Anh Phan, Alberto Striolo
Veröffentlicht in:
The Journal of Physical Chemistry Letters, Ausgabe 11/5, 2020, Seite(n) 1814-1821, ISSN 1948-7185
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpclett.9b03751
Autoren:
Jyrki Jauhiainen, Petri Kuusela, Aku Seppänen, Tuomo Valkonen
Veröffentlicht in:
SIAM Journal on Imaging Sciences, Ausgabe 13/3, 2020, Seite(n) 1415-1445, ISSN 1936-4954
Herausgeber:
Society for Industrial and Applied Mathematics
DOI:
10.1137/20m1321711
Autoren:
Pedram Mahzari, Adrian P. Jones, Eric H.Oelkers
Veröffentlicht in:
Journal of Petroleum Science and Engineering, 2019, ISSN 0920-4105
Herausgeber:
Elsevier BV
DOI:
10.1016/j.petrol.2019.106188
Autoren:
Maria Apostolopoulou, Mirella S. Santos, Muhammad Hamza, Tai Bui, Ioannis G. Economou, Michail Stamatakis, Alberto Striolo
Veröffentlicht in:
Journal of Chemical Theory and Computation, Ausgabe 15/12, 2019, Seite(n) 6907-6922, ISSN 1549-9618
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jctc.9b00776
Autoren:
Antti Voss, Payam Hosseini, Mohammad Pour-Ghaz, Marko Vauhkonen, Aku Seppänen
Veröffentlicht in:
Materials & Design, Ausgabe 181, 2019, Seite(n) 107967, ISSN 0264-1275
Herausgeber:
Elsevier BV
DOI:
10.1016/j.matdes.2019.107967
Autoren:
Beata Orlecka-Sikora, Szymon Cielesta
Veröffentlicht in:
Scientific Reports, Ausgabe 10/1, 2020, ISSN 2045-2322
Herausgeber:
Nature Publishing Group
DOI:
10.1038/s41598-020-60928-0
Autoren:
Maxime Pouvreau, Jeffery A. Greathouse, Randall T. Cygan, Andrey G. Kalinichev
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 123/18, 2019, Seite(n) 11628-11638, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.9b00514
Autoren:
Anh Phan, Dian Fan, Alberto Striolo
Veröffentlicht in:
Physics of Fluids, Ausgabe 32/10, 2020, Seite(n) 101301, ISSN 1070-6631
Herausgeber:
American Institute of Physics
DOI:
10.1063/5.0022481
Autoren:
Alberto Striolo; Paola Lettieri; Andrea Paulillo
Veröffentlicht in:
Data in Brief (104771) (2019), Ausgabe Volume 133, Part B, December 2019, Pages 105-226, 2019, ISSN 2352-3409
Herausgeber:
Elsevier BV
DOI:
10.1016/j.dib.2019.104771
Autoren:
Clark, D.E., Galeczka, I.M., Dideriksen, K., Voigt, M.J., Wolff-Boenisch, D., Gíslason, S.R
Veröffentlicht in:
International Journal of Greenhouse Gas Control, 2019, ISSN 1750-5836
Herausgeber:
Elsevier BV
DOI:
10.1016/j.ijggc.2019.07.007
Autoren:
Antti Voss, Mohammad Pour-Ghaz, Marko Vauhkonen, Aku Seppänen
Veröffentlicht in:
Cement and Concrete Composites, Ausgabe 112, 2020, Seite(n) 103639, ISSN 0958-9465
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.cemconcomp.2020.103639
Autoren:
Ganna Shchygol, Alexei Yakovlev, Tomáš Trnka, Adri C. T. van Duin, Toon Verstraelen
Veröffentlicht in:
Journal of Chemical Theory and Computation, Ausgabe 15/12, 2019, Seite(n) 6799-6812, ISSN 1549-9618
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jctc.9b00769
Autoren:
Anh Phan, Alberto Striolo
Veröffentlicht in:
Microporous and Mesoporous Materials, Ausgabe 288, 2019, Seite(n) 109559, ISSN 1387-1811
Herausgeber:
Elsevier BV
DOI:
10.1016/j.micromeso.2019.06.021
Autoren:
Snæbjörnsdóttir, S.Ó., Sigfússon, B., Marieni, C. et al.
Veröffentlicht in:
Nature Reviews Earth & Environment, 2020, ISSN 2662-138X
Herausgeber:
Springer Nature
DOI:
10.1038/s43017-019-0011-8
Autoren:
Narasimhan Loganathan, A. Ozgur Yazaydin, Geoffrey M. Bowers, Brice F. Ngouana-Wakou, Andrey G. Kalinichev, R. James Kirkpatrick
Veröffentlicht in:
The Journal of Physical Chemistry C, Ausgabe 124/4, 2020, Seite(n) 2490-2500, ISSN 1932-7447
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.jpcc.9b10051
Autoren:
Stanislaw Lasocki, Beata Orlecka-Sikora
Veröffentlicht in:
Geophysical Research Letters, 2019, ISSN 1944-8007
Herausgeber:
American Geophysical Union
DOI:
10.1002/essoar.10501120.2
Autoren:
Bergur Sigfússon, Magnús Þór Arnarson, Sandra Ósk Snæbjörnsdóttir, Marta Rós Karlsdóttir, Edda Sif Aradóttir, Ingvi Gunnarsson
Veröffentlicht in:
Energy Procedia, Ausgabe 146, 2018, Seite(n) 135-145, ISSN 1876-6102
Herausgeber:
Elsevier
DOI:
10.1016/j.egypro.2018.07.018
Autoren:
Sakiru B. Badmos, Naimul Islam, Urvi Shah, Alberto Striolo, David R. Cole
Veröffentlicht in:
Molecular Physics, Ausgabe 118/23, 2020, Seite(n) e1781944, ISSN 0026-8976
Herausgeber:
Taylor & Francis
DOI:
10.1080/00268976.2020.1781944
Autoren:
Antti Voss
Veröffentlicht in:
2020, ISBN 978-952-61-3309-6
Herausgeber:
University of Eastern Finland
Autoren:
Fan, Dian; Pini, Ronny; Striolo, Alberto
Veröffentlicht in:
Ausgabe 1, 2020
Herausgeber:
Cornell University
Autoren:
Andrea D'Aniello, Massimiliano Fabbricino, Daniela Ducci, Domenico Pianese
Veröffentlicht in:
FlowPath 2019, National Meeting on Hydrogeology, Conference Proceedings, 2019, ISBN 978-88-5526-012-1
Herausgeber:
Ledizioni LediPublishing
DOI:
10.14672/55260121
Autoren:
A. Voss, M. Pour-Ghaz, M. Vauhkonen, A. Seppänen
Veröffentlicht in:
2019
Herausgeber:
SMAR 2019
Autoren:
Taghi Shirzad, Stanisław Lasocki, and Beata Orlecka‐Sikora
Veröffentlicht in:
EGU General Assembly 2020, 2020
Herausgeber:
EGU General Assembly 2020
DOI:
10.5194/egusphere-egu2020-13079
Autoren:
Thomas M.P Ratouis, Sandra O. Snæbjörnsdóttir, Gunnar Gunnarsson, Ingvi Gunnarsson, Bjarni R. Kristjánsson, and Edda S.P. Aradóttir
Veröffentlicht in:
PROCEEDINGS, 44th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, February 11-13, 2019 SGP-TR-214, 2019
Herausgeber:
Stanford University
Autoren:
David Cole, Alberto Striolo
Veröffentlicht in:
Deep Carbon - Past to Present, 2019, Seite(n) 358-387, ISBN 9781108677950
Herausgeber:
Cambridge University Press
DOI:
10.1017/9781108677950.012
Autoren:
David Cole, Alberto Striolo
Veröffentlicht in:
Deep Carbon: Past to Present, 2019, Seite(n) 358-387, ISBN 9781108677950
Herausgeber:
Cambridge University Press
Rechte des geistigen Eigentums
Antrags-/Publikationsnummer:
UKIPO
1812766.2
Datum:
2018-08-06
Antragsteller:
MIRICO LTD
Antrags-/Publikationsnummer:
UKIPO
1812766.2
Datum:
2018-08-06
Antragsteller:
MIRICO LTD
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor