Recycling carbon dioxide in the cement industry to produce added-value additives: a step towards a CO2 circular economy

Informazioni relative al progetto

RECODE

ID dell’accordo di sovvenzione: 768583

DOI

10.3030/768583

Progetto chiuso

Data della firma CE 17 Luglio 2017

Data di avvio 1 Agosto 2017

Data di completamento 31 Luglio 2022

Finanziato da

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Costo totale

€ 7 904 415,00

Contributo UE

€ 7 904 415,00

Coordinato da

FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA
Italy

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (15)

Report on the Exploitation plan for the RECODE technologies, including techno-economic assessment and vision studies for alternative CO2 valorisation routes

The final explotation plan for the RECODE technologies is described along with the technoeconomic assessmentof the technologies by comparison with alternative competing CO2 valorisation routes

Training seminar 2

Development of training courses for students and professionals

Interim report on environmental assessment according to Life Cycle Analysis and REACH methods

 The interim LCA analysis of the RECODE process is described

Report on individual units models

The main models adopted for the modelling of each single process unit of interest are described

Final report on environmental assessment according to Life Cycle Analysis and REACH methods

The final LCA analysis of the RECODE process is described

Report on the assessment of the quality increase of cements enabled by the RECODE CO2-derived additives.

A complete set of characterisation tests are carried out to measure the improvements achieved by the use of the RECODE additives 

Training seminar 1

Development of training courses for students and professionals 

Report on the definition of regulatory framework after coming in contact with key energy players

This report lists the recommendation obtained by interviewing a number of stakeholder on the prenormative issues associated to the RECODE developments

Project Quality Plan (procedures regarding project quality monitor-ing and implementation)

Project procedures on consortium communication, documentation standards, detailed work plan, internal review processes and internal draft deliverables deadlines

Final report on dissemination activities

Report on project dissemination activities, media relations and outreach 

Dissemination plan

Awareness and dissemination plan outlining the target audiences, key messages, communication channels , implementation timing and role and responsibilities of partners

TRL 6 demo campaign accomplished and monitored

The entire demo campaign and the data monitored is reported in a detailed document and an outline of the major achievement is produced for the interested public

Report on final workshop and training event

Report on the final EU level workshop and training with presentation of the project achievements to the general public, policy makers, main stakeholders and students

Dissemination plan update

Update of the awareness and dissemination plan outlining the target audiences, key messages, communication channels , implementation timing and role and responsibilities of partners

Communication material

Project communication material including visual identity and basic project rules for communication

Websites, patent fillings, videos etc. (2)

Production & distribution of an educational material on digital support

Educational material on the final event to be distributed both via digital support USB memory to training participants and available for download from the project web page

Project website

Publication of the RECODE project public website (with information on the projects, partners profiles and feeds from relevant social  networks) and internal repository for document sharing

Pubblicazioni

Peer reviewed articles (15)

Toxicological profile of calcium carbonate nanoparticles for industrial applications

Autori: Marta d’Amora, Freddy Liendo, Fabio A. Deorsola, Samir Bensaid, Silvia Giordani
Pubblicato in: Colloids and Surfaces B: Biointerfaces, Numero 190, 2020, Pagina/e 110947, ISSN 0927-7765
Editore: Elsevier BV
DOI: 10.1016/j.colsurfb.2020.110947

Cyclic carbonates synthesised from CO2: Applications, challenges and recent research trends

Autori: Paolo P. Pescarmona
Pubblicato in: Current Opinion in Green and Sustainable Chemistry, Numero 24522236, 2021, Pagina/e 100457, ISSN 2452-2236
Editore: Elsevier
DOI: 10.1016/j.cogsc.2021.100457

Nano CaCO3 particles in cement mortars towards developing a circular economy in the cement industry

Autori: Isabella Cosentino, Freddy Liendo, Mara Arduino, Luciana Restuccia, Samir Bensaid, Fabio Deorsola, Giuseppe Andrea Ferro
Pubblicato in: Procedia Structural Integrity, Numero 26, 2020, Pagina/e 155-165, ISSN 2452-3216
Editore: Elsevier B.V
DOI: 10.1016/j.prostr.2020.06.019

Recycling CO2 from flue gas for CaCO3 nanoparticles production as cement filler: A Life Cycle Assessment

Autori: Esperanza Batuecas; Freddy Liendo; Tonia Tommasi; Samir Bensaid; Fabio Alessandro Deorsola; Debora Fino
Pubblicato in: Journal of CO2 Utilization, Numero 22129820, 2021, Pagina/e 101446, ISSN 2212-9820
Editore: Elsevier BV
DOI: 10.1016/j.jcou.2021.101446

Efficient and reversible CO2 capture in bio-based ionic liquids solutions

Autori: Latini,Giulio; Signorile,Matteo; Rosso,Francesca; Fin,Andrea; d'Amora,Marta; Giordani,Silvia; Pirri,Fabrizio; Crocellà,Valentina; Bordiga,Silvia; Bocchini,sergio
Pubblicato in: Journal of CO2 Utilization, Numero Volume 55, 2022, Pagina/e 101815, ISSN 2212-9820
Editore: Elsevier BV
DOI: 10.1016/j.jcou.2021.101815

Effect of Thermal Stabilization on PAN-Derived Electrospun Carbon Nanofibers for CO2 Capture

Autori: Elisa Maruccia, Stefania Ferrari, Mattia Bartoli, Lorenzo Lucherini, Giuseppina Meligrana, Candido F. Pirri, Guido Saracco, Claudio Gerbaldi
Pubblicato in: Polymers, 2021, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym13234197

Nanocast nitrogen-containing ordered mesoporous carbons from glucosamine for selective CO2 capture

Autori: Elisa Maruccia; Elisa Maruccia; Mirtha A.O. Lourenço; Tatiana Priamushko; Mattia Bartoli; Sergio Bocchini; Fabrizio Pirri; Fabrizio Pirri; Guido Saracco; Freddy Kleitz; Claudio Gerbaldi
Pubblicato in: Materials Today Sustainability, Numero 4, 2022, ISSN 2589-2347
Editore: Elsevier Ltd.
DOI: 10.1016/j.mtsust.2021.100089

Nucleation and growth kinetics of CaCO3 crystals in the presence of foreign monovalent ions

Autori: Freddy Liendo; Mara Arduino; Fabio Alessandro Deorsola; Samir Bensaid
Pubblicato in: Journal of Crystal Growth, Numero 00220248, 2022, Pagina/e 126406, ISSN 0022-0248
Editore: Elsevier BV
DOI: 10.1016/j.jcrysgro.2021.126406

Factors controlling and influencing polymorphism, morphology and size of calcium carbonate synthesized through the carbonation route: A review

Autori: Freddy Liendo; Mara Arduino; Fabio A. Deorsola; Samir Bensaid
Pubblicato in: POwder Technology, Numero 00325910, 2022, Pagina/e 117050, ISSN 0032-5910
Editore: Elsevier BV
DOI: 10.1016/j.powtec.2021.117050

Zeolite templated carbon from Beta replica as metal-free electrocatalyst for CO2 reduction

Autori: Papanikolaou,G.; Chillè,D.; Abate,S.; Perathoner,S.; Centi,G.; Giorgianni,G.; Cozza,D.; Dalena,F.; Migliori,M.; Giordano,G.; Lanzafame,P.
Pubblicato in: Applied Materials Today, Numero Volume 26, 2022, Pagina/e 101383, ISSN 2352-9407
Editore: Elsevier
DOI: 10.1016/j.apmt.2022.101383

Optimization of CaCO3 synthesis through the carbonation route in a packed bed reactor

Autori: Freddy Liendo, Mara Arduino, Fabio A.D eorsola Samir Bensaid
Pubblicato in: Powder Technology, Numero 00325910, 2021, Pagina/e 868-881, ISSN 0032-5910
Editore: Elsevier BV
DOI: 10.1016/j.powtec.2020.09.036

An efficient method to prepare supported bismuth nanoparticles as highly selective electrocatalyst for the conversion of CO2 into formate

Autori: Bart De Jong; Paolo Pescarmona; Nick Daems; Matteo Miola
Pubblicato in: Chemical Communications, Numero 13597345, 2020, Pagina/e 14992, ISSN 1359-7345
Editore: Royal Society of Chemistry
DOI: 10.1039/d0cc06818g

Chainlike Mesoporous SnO 2 as a Well-Performing Catalyst for Electrochemical CO 2 Reduction

Autori: Katarzyna Bejtka, Juqin Zeng, Adriano Sacco, Micaela Castellino, Simelys Hernández, M. Amin Farkhondehfal, Umberto Savino, Simone Ansaloni, Candido F. Pirri, Angelica Chiodoni
Pubblicato in: ACS Applied Energy Materials, Numero 2/5, 2019, Pagina/e 3081-3091, ISSN 2574-0962
Editore: ACS APPLIED ENERGY MATERIALS
DOI: 10.1021/acsaem.8b02048

Evaluation of the mechanical properties of cements with fillers derived from the CO2 reduction of cement plants

Autori: I. Cosentino, L. Restuccia, G.A. Ferro, F. Liendo, F. Deorsola, S. Bensaid
Pubblicato in: Procedia Structural Integrity, Numero 18, 2019, Pagina/e 472-483, ISSN 2452-3216
Editore: Elsevier B.V.
DOI: 10.1016/j.prostr.2019.08.189

Innovative Gas-Liquid Membrane Contactor Systems for Carbon Capture and Mineralization in Energy Intensive Industries.

Autori: Akrivi Asimakopoulou; Dimitrios Koutsonikolas; Georgia Kastrinaki; George Skevis
Pubblicato in: Volume 11, Numero 20770375, 2021, Pagina/e 271, ISSN 2077-0375
Editore: Molecular Diversity Preservation International
DOI: 10.3390/membranes11040271