European Commission logo
English English
CORDIS - EU research results
CORDIS

Efficient Material Hybridization by Unconventional Layup and Forming of Metals and Composites for Fabrication of Multifunctional Structures

Deliverables

Redesigned case-study demonstrator.

Redesigned casestudy demonstrator

Dissemination and Communication Plan (1st report)

Dissemination and Communication Plan M24/ M48

Data Management Plan

Data Management Plan M8/ M24/ M48

Dissemination and Communication Plan (2nd report)

Dissemination and Communication Plan 2nd report

Data Management

The research data to be opened will include datasets with data metrics and procedures for benchmarking purposes as well as technical data needed to validate the results presented in the deposited scientific publications In order to manage the collection processing and openness of research data during and after the project an extended Data Management Plan will be developed in an early stage M8 to be updated during the project M24 and M48 The Plan will include instructions on archiving and presentation of data legibility standards and specifications of all data acquisition sufficient for data reproducibility Costs related to open access have been considered in the estimated budget of the project

Publications

Modelling the Heating Process in the Transient and Steady State of an In Situ Tape-Laying Machine Head

Author(s): Jhonny de Sá Rodrigues; Paulo Teixeira Gonçalves; Luis Pina; Fernando Gomes de Almeida
Published in: Journal of Manufacturing and Materials Processing, Issue 1, 2022, ISSN 2504-4494
Publisher: MDPI
DOI: 10.3390/jmmp6010008

A Methodology for Real-Time HiL Validation of Hydraulic-Press Controllers Based on Novel Modeling Techniques

Author(s): Jorge Rodriguez-Guerra, Carlos Calleja, Iker Elorza, Ana Maria Macarulla, Aron Pujana, Igor Azurmendi
Published in: IEEE Access, Issue 7, 2019, Page(s) 110541-110553, ISSN 2169-3536
Publisher: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2019.2934170

Off-line programming of a flexible and adaptive production line for composite-metal multi-material manufacturing based on OPC-UA communication

Author(s): Lucia Alonso Ferreira; Manuel Álvarez Souto; Cédric Chappuis; Fouad El Khaldi
Published in: Procedia Manufacturing, Issue 2, 2020, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2020.10.073

Automated in situ consolidation process for pre-impregnated carbon fibers: a cyber phisycal approach

Author(s): J. Rodrigues; F. Silva; J. Santos; João Manuel R. S. Tavares; L. Pina
Published in: Materiales Compuestos, Issue 3, 2019, Page(s) 80-89
Publisher: Revista de la Asociación Española de Materiales Compuestos

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available