Efficient Material Hybridization by Unconventional Layup and Forming of Metals and Composites for Fabrication of Multifunctional Structures

Información del proyecto

LAY2FORM

Identificador del acuerdo de subvención: 768710

DOI

10.3030/768710

Proyecto cerrado

Fecha de la firma de la CE 18 Julio 2017

Fecha de inicio 1 Octubre 2017

Fecha de finalización 31 Marzo 2022

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Coste total

€ 4 931 303,75

Aportación de la UE

€ 4 931 294,75

Coordinado por

INEGI - INSTITUTO DE CIENCIA E INOVACAO EM ENGENHARIA MECANICA E ENGENHARIA INDUSTRIAL
Portugal

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Other (4)

Pre-tested LAY2FORM prototype system.
Fully operational project website. Templates for presentations and reports.
LAY2FORM dataset for benchmarking.
Dissemination kit: Poster, banner and flyer.

Documents, reports (4)

Redesigned case-study demonstrator.

Redesigned casestudy demonstrator

Dissemination and Communication Plan (1st report)

Dissemination and Communication Plan M24/ M48

Data Management Plan

Data Management Plan M8/ M24/ M48

Dissemination and Communication Plan (2nd report)

Dissemination and Communication Plan 2nd report

Open Research Data Pilot (1)

Data Management

The research data to be opened will include datasets with data metrics and procedures for benchmarking purposes as well as technical data needed to validate the results presented in the deposited scientific publications In order to manage the collection processing and openness of research data during and after the project an extended Data Management Plan will be developed in an early stage M8 to be updated during the project M24 and M48 The Plan will include instructions on archiving and presentation of data legibility standards and specifications of all data acquisition sufficient for data reproducibility Costs related to open access have been considered in the estimated budget of the project

Publicaciones

Peer reviewed articles (3)

Modelling the Heating Process in the Transient and Steady State of an In Situ Tape-Laying Machine Head

Autores: Jhonny de Sá Rodrigues; Paulo Teixeira Gonçalves; Luis Pina; Fernando Gomes de Almeida
Publicado en: Journal of Manufacturing and Materials Processing, Edición 1, 2022, ISSN 2504-4494
Editor: MDPI
DOI: 10.3390/jmmp6010008

A Methodology for Real-Time HiL Validation of Hydraulic-Press Controllers Based on Novel Modeling Techniques

Autores: Jorge Rodriguez-Guerra, Carlos Calleja, Iker Elorza, Ana Maria Macarulla, Aron Pujana, Igor Azurmendi
Publicado en: IEEE Access, Edición 7, 2019, Página(s) 110541-110553, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2019.2934170

Off-line programming of a flexible and adaptive production line for composite-metal multi-material manufacturing based on OPC-UA communication

Autores: Lucia Alonso Ferreira; Manuel Álvarez Souto; Cédric Chappuis; Fouad El Khaldi
Publicado en: Procedia Manufacturing, Edición 2, 2020, ISSN 2351-9789
Editor: Elsevier
DOI: 10.1016/j.promfg.2020.10.073

Conference proceedings (1)

Automated in situ consolidation process for pre-impregnated carbon fibers: a cyber phisycal approach

Autores: J. Rodrigues; F. Silva; J. Santos; João Manuel R. S. Tavares; L. Pina
Publicado en: Materiales Compuestos, Edición 3, 2019, Página(s) 80-89
Editor: Revista de la Asociación Española de Materiales Compuestos
DOI: 10.5281/zenodo.6414400