Efficient Material Hybridization by Unconventional Layup and Forming of Metals and Composites for Fabrication of Multifunctional Structures

Informations projet

LAY2FORM

N° de convention de subvention: 768710

DOI

10.3030/768710

Projet clôturé

Date de signature de la CE 18 Juillet 2017

Date de début 1 Octobre 2017

Date de fin 31 Mars 2022

Financé au titre de

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Coût total

€ 4 931 303,75

Contribution de l’UE

€ 4 931 294,75

Coordonné par

INEGI - INSTITUTO DE CIENCIA E INOVACAO EM ENGENHARIA MECANICA E ENGENHARIA INDUSTRIAL
Portugal

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Other (4)

Pre-tested LAY2FORM prototype system.
Fully operational project website. Templates for presentations and reports.
LAY2FORM dataset for benchmarking.
Dissemination kit: Poster, banner and flyer.

Documents, reports (4)

Redesigned case-study demonstrator.

Redesigned casestudy demonstrator

Dissemination and Communication Plan (1st report)

Dissemination and Communication Plan M24/ M48

Data Management Plan

Data Management Plan M8/ M24/ M48

Dissemination and Communication Plan (2nd report)

Dissemination and Communication Plan 2nd report

Open Research Data Pilot (1)

Data Management

The research data to be opened will include datasets with data metrics and procedures for benchmarking purposes as well as technical data needed to validate the results presented in the deposited scientific publications In order to manage the collection processing and openness of research data during and after the project an extended Data Management Plan will be developed in an early stage M8 to be updated during the project M24 and M48 The Plan will include instructions on archiving and presentation of data legibility standards and specifications of all data acquisition sufficient for data reproducibility Costs related to open access have been considered in the estimated budget of the project

Publications

Peer reviewed articles (3)

Modelling the Heating Process in the Transient and Steady State of an In Situ Tape-Laying Machine Head

Auteurs: Jhonny de Sá Rodrigues; Paulo Teixeira Gonçalves; Luis Pina; Fernando Gomes de Almeida
Publié dans: Journal of Manufacturing and Materials Processing, Numéro 1, 2022, ISSN 2504-4494
Éditeur: MDPI
DOI: 10.3390/jmmp6010008

A Methodology for Real-Time HiL Validation of Hydraulic-Press Controllers Based on Novel Modeling Techniques

Auteurs: Jorge Rodriguez-Guerra, Carlos Calleja, Iker Elorza, Ana Maria Macarulla, Aron Pujana, Igor Azurmendi
Publié dans: IEEE Access, Numéro 7, 2019, Page(s) 110541-110553, ISSN 2169-3536
Éditeur: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2019.2934170

Off-line programming of a flexible and adaptive production line for composite-metal multi-material manufacturing based on OPC-UA communication

Auteurs: Lucia Alonso Ferreira; Manuel Álvarez Souto; Cédric Chappuis; Fouad El Khaldi
Publié dans: Procedia Manufacturing, Numéro 2, 2020, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.10.073

Conference proceedings (1)

Automated in situ consolidation process for pre-impregnated carbon fibers: a cyber phisycal approach

Auteurs: J. Rodrigues; F. Silva; J. Santos; João Manuel R. S. Tavares; L. Pina
Publié dans: Materiales Compuestos, Numéro 3, 2019, Page(s) 80-89
Éditeur: Revista de la Asociación Española de Materiales Compuestos
DOI: 10.5281/zenodo.6414400