Efficient Material Hybridization by Unconventional Layup and Forming of Metals and Composites for Fabrication of Multifunctional Structures

Projektinformationen

LAY2FORM

ID Finanzhilfevereinbarung: 768710

DOI

10.3030/768710

Projekt abgeschlossen

EK-Unterschriftsdatum 18 Juli 2017

Startdatum 1 Oktober 2017

Enddatum 31 März 2022

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Gesamtkosten

€ 4 931 303,75

EU-Beitrag

€ 4 931 294,75

Koordiniert durch

INEGI - INSTITUTO DE CIENCIA E INOVACAO EM ENGENHARIA MECANICA E ENGENHARIA INDUSTRIAL
Portugal

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Other (4)

Pre-tested LAY2FORM prototype system.
Fully operational project website. Templates for presentations and reports.
LAY2FORM dataset for benchmarking.
Dissemination kit: Poster, banner and flyer.

Documents, reports (4)

Redesigned case-study demonstrator.

Redesigned casestudy demonstrator

Dissemination and Communication Plan (1st report)

Dissemination and Communication Plan M24/ M48

Data Management Plan

Data Management Plan M8/ M24/ M48

Dissemination and Communication Plan (2nd report)

Dissemination and Communication Plan 2nd report

Open Research Data Pilot (1)

Data Management

The research data to be opened will include datasets with data metrics and procedures for benchmarking purposes as well as technical data needed to validate the results presented in the deposited scientific publications In order to manage the collection processing and openness of research data during and after the project an extended Data Management Plan will be developed in an early stage M8 to be updated during the project M24 and M48 The Plan will include instructions on archiving and presentation of data legibility standards and specifications of all data acquisition sufficient for data reproducibility Costs related to open access have been considered in the estimated budget of the project

Veröffentlichungen

Peer reviewed articles (3)

Modelling the Heating Process in the Transient and Steady State of an In Situ Tape-Laying Machine Head

Autoren: Jhonny de Sá Rodrigues; Paulo Teixeira Gonçalves; Luis Pina; Fernando Gomes de Almeida
Veröffentlicht in: Journal of Manufacturing and Materials Processing, Ausgabe 1, 2022, ISSN 2504-4494
Herausgeber: MDPI
DOI: 10.3390/jmmp6010008

A Methodology for Real-Time HiL Validation of Hydraulic-Press Controllers Based on Novel Modeling Techniques

Autoren: Jorge Rodriguez-Guerra, Carlos Calleja, Iker Elorza, Ana Maria Macarulla, Aron Pujana, Igor Azurmendi
Veröffentlicht in: IEEE Access, Ausgabe 7, 2019, Seite(n) 110541-110553, ISSN 2169-3536
Herausgeber: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2019.2934170

Off-line programming of a flexible and adaptive production line for composite-metal multi-material manufacturing based on OPC-UA communication

Autoren: Lucia Alonso Ferreira; Manuel Álvarez Souto; Cédric Chappuis; Fouad El Khaldi
Veröffentlicht in: Procedia Manufacturing, Ausgabe 2, 2020, ISSN 2351-9789
Herausgeber: Elsevier
DOI: 10.1016/j.promfg.2020.10.073

Conference proceedings (1)

Automated in situ consolidation process for pre-impregnated carbon fibers: a cyber phisycal approach

Autoren: J. Rodrigues; F. Silva; J. Santos; João Manuel R. S. Tavares; L. Pina
Veröffentlicht in: Materiales Compuestos, Ausgabe 3, 2019, Seite(n) 80-89
Herausgeber: Revista de la Asociación Española de Materiales Compuestos
DOI: 10.5281/zenodo.6414400