Mass Manufacture of MEAs Using High Speed Deposition Processes

Projektinformationen

MAMA-MEA

ID Finanzhilfevereinbarung: 779591

DOI

10.3030/779591

Projekt abgeschlossen

EK-Unterschriftsdatum 14 Dezember 2017

Startdatum 1 Januar 2018

Enddatum 30 Juni 2021

Finanziert unter

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Gesamtkosten

€ 3 189 816,00

EU-Beitrag

€ 3 189 816,00

Koordiniert durch

TECHNISCHE UNIVERSITAET CHEMNITZ
Germany

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (5)

Review of scientific and technical literature about liquid deposition technologies

UNI, together with TUC, ENAS and SG, will report into a single document the results of a deep review of the available techniques for ink-suspension deposition. This review will include technical - patent included - and scientific open literature; the relationship between additive technologies and ink physical and rheological properties will be emphasised. The document will be presented in the form of a PDF (Portable Document Format) file and made available to the public at M5 on the project website. The document may be a first draft to be submitted as a review paper for possible journal publication; in this case, were the paper accepted, the final version will be uploaded.

Project dissemination and communication plan

A list of concrete dissemination activities will be assemble in the first year of the project and updated throughout the funding period. The plan will also contain a list of contacts and a Sounding Board.

Non-selected techniques: report on possible improvements

The potential for improvement of the non-selected technologies will be summarized in a report available to public, along with suggestions making them ready for implementation in a medium-term horizon. UNI, supported by TUC, ENAS, JMFC and SG, will present an exhaustive report about possible improvements of the techniques non-selected for implementation within MAMA MEA project (Task 1.4). Notably, a detailed set of actions and objectives will be discussed as a path to make those technologies potentially applicable in a medium-term horizon. The report will be made publicly available at M30 in PDF format on the project website. It will be updated and subject to changes and extensions throughout the M8-M30 time span, in parallel with the other activities.

Report on suitable test protocols and baseline testing

A set of test protocols to carry out a baseline testing exercise using state-of-the-art roll-to-roll manufacturing.

Layer characterization

The description of a comprehensive suite of tests characterizing the deposited layers in a morphological way and as well as their ability to perform to the specification under the desired conditions will be given in this publically accessible report.

Websites, patent fillings, videos etc. (1)

Project web site

Web site tracking the project activities and achievements providing the non-confidential information to the general public.

Veröffentlichungen

Peer reviewed articles (4)

Multilayer additive manufacturing of catalyst-coated membranes for polymer electrolyte membrane fuel cells by inkjet printing

Autoren: Andreas Willert, Farzin Z. Tabary, Tatiana Zubkova, Paolo E. Santangelo, Marcello Romagnoli, Reinhard R. Baumann
Veröffentlicht in: International Journal of Hydrogen Energy, Ausgabe 47, 2022, Seite(n) 20973-20986, ISSN 0360-3199
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.ijhydene.2022.04.197

Smart catalyst deposition by 3D printing for Polymer Electrolyte Membrane Fuel Cell manufacturing

Autoren: Maria Cannio, Stefania Righi, Paolo E. Santangelo, Marcello Romagnoli, Rolando Pedicini, Alessandra Carbone, Irene Gatto
Veröffentlicht in: Renewable Energy, Ausgabe 163, 2021, Seite(n) 414-422, ISSN 0960-1481
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.renene.2020.08.064

An experimental approach to evaluate drying kinetics and foam formation in inks for inkjet printing of fuel-cell layers

Autoren: P.E. Santangelo, M. Romagnoli, M. Puglia
Veröffentlicht in: Experimental Thermal and Fluid Science, 2021, ISSN 0894-1777
Herausgeber: Elsevier BV

Review of Catalyst-deposition Techniques for PEMFC Electrodes

Autoren: Paolo Santangelo, Maria Cannio, Marcello Romagnoli
Veröffentlicht in: TECNICA ITALIANA-Italian Journal of Engineering Science, Ausgabe 63/1, 2019, Seite(n) 65-72, ISSN 0040-1846
Herausgeber: Tecnica Italiana
DOI: 10.18280/ti-ijes.630109