Resultado final
Report describing the rig setup and assembly and listing the performed tests with highlevel results and status relative to test objectives
Plan for Communication, Dissemination and Exploitation of project resultsThis document will contain the updated plans for communication activities, dissemination of project results and exploitation of project results and handling of IP rights linked to project outputs.
Report on Communication, Dissemination and Exploitation actionsThis document will report on the actual activities in the field of communication dissemination and exploitation of project results
Rig 2 (optimized) Analysis of Advanced Measurements (seed-gas, hot-wire, optical)This public report contains highlights of the analyses of the measured data of Rig 2 with the new additional advanced measurement techniques seedgas hotwire optical in dimensionless format suitable also later publications
Publicaciones
Autores:
Patrick Zeno Sterzinger
Publicado en:
2020
Editor:
Faculty of Mechanical Engineering at Graz University of Technology
Autores:
P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, M. Dellacasagrande, A. Peters, G. Maini, F. Heitmeir, E. Göttlich
Publicado en:
Journal of Turbomachinery, Edición 142/10, 2020, ISSN 0889-504X
Editor:
ASME
DOI:
10.1115/1.4046453
Autores:
P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, A. Peters, G. Maini, M. Dellacasagrande, F. Heitmeir, E. Göttlich
Publicado en:
Journal of Turbomachinery, Edición 142/10, 2020, ISSN 0889-504X
Editor:
ASME
DOI:
10.1115/1.4046452
Autores:
P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Publicado en:
Journal of Turbomachinery, Edición 143/5, 2021, ISSN 0889-504X
Editor:
ASME
DOI:
10.1115/1.4050145
Autores:
Marios Patinios, Filippo Merli, Asim Hafizovic, Emil Göttlich
Publicado en:
Volume 2C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions, 2021, ISBN 978-0-7918-8492-8
Editor:
American Society of Mechanical Engineers
DOI:
10.1115/gt2021-58586
Autores:
F. Merli, P. Z. Sterzinger, M. Dellacasagrande, L. Wiesinger, A. Peters, F. Heitmeir, E. Göttlich
Publicado en:
Volume 2E: Turbomachinery, 2020, ISBN 978-0-7918-8410-2
Editor:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-15216
Autores:
Filippo Merli, Patrick Zeno Sterzinger, Michael Steiner, Emil Göttlich
Publicado en:
Diffuser Workshop 2019, 2019
Editor:
Institute of Turbomachinery and Fluid Dynamics, Leibnitz Universität Hannover
Autores:
Emil Göttlich
Publicado en:
Transport Research Arena 2018, 2018
Editor:
bmvit Competence Corner
Autores:
P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Publicado en:
Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Editor:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-14798
Autores:
Filippo Merli, Andreas Peters, Patrick Zeno Sterzinger, Lukas Wiesinger, Franz Heitmeir, Emil Göttlich
Publicado en:
ASME Turbo Expo 2019, 2019
Editor:
Student Poster
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles