European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Turbine Research for Aerodynamical Vane-frame Improvements in Advanced Two-spool Arrangements

Livrables

Test Campaign 2 Completed

Report describing the rig setup and assembly and listing the performed tests with highlevel results and status relative to test objectives

Plan for Communication, Dissemination and Exploitation of project results

This document will contain the updated plans for communication activities, dissemination of project results and exploitation of project results and handling of IP rights linked to project outputs.

Report on Communication, Dissemination and Exploitation actions

This document will report on the actual activities in the field of communication dissemination and exploitation of project results

Rig 2 (optimized) Analysis of Advanced Measurements (seed-gas, hot-wire, optical)

This public report contains highlights of the analyses of the measured data of Rig 2 with the new additional advanced measurement techniques seedgas hotwire optical in dimensionless format suitable also later publications

Publications

Investigation of a HPT-TCF-LPT System under the Presence of Purge Flows, State-of-the-Art andFuture Improvements

Auteurs: Patrick Zeno Sterzinger
Publié dans: 2020
Éditeur: Faculty of Mechanical Engineering at Graz University of Technology

Unsteady Flow Interactions Between a High- and Low-Pressure Turbine

Auteurs: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, M. Dellacasagrande, A. Peters, G. Maini, F. Heitmeir, E. Göttlich
Publié dans: Journal of Turbomachinery, Numéro 142/10, 2020, ISSN 0889-504X
Éditeur: ASME
DOI: 10.1115/1.4046453

Impact of Varying High- and Low-Pressure Turbine Purge Flows on a Turbine Center Frame and Low-Pressure Turbine System

Auteurs: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, A. Peters, G. Maini, M. Dellacasagrande, F. Heitmeir, E. Göttlich
Publié dans: Journal of Turbomachinery, Numéro 142/10, 2020, ISSN 0889-504X
Éditeur: ASME
DOI: 10.1115/1.4046452

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Auteurs: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Publié dans: Journal of Turbomachinery, Numéro 143/5, 2021, ISSN 0889-504X
Éditeur: ASME
DOI: 10.1115/1.4050145

The Interaction of Purge Flows With Secondary Flow Features in Turbine Center Frames

Auteurs: Marios Patinios, Filippo Merli, Asim Hafizovic, Emil Göttlich
Publié dans: Volume 2C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions, 2021, ISBN 978-0-7918-8492-8
Éditeur: American Society of Mechanical Engineers
DOI: 10.1115/gt2021-58586

Unsteady Effects due to Rotor Purge Flow Variations in a Dual-Spool Turbine Setup

Auteurs: F. Merli, P. Z. Sterzinger, M. Dellacasagrande, L. Wiesinger, A. Peters, F. Heitmeir, E. Göttlich
Publié dans: Volume 2E: Turbomachinery, 2020, ISBN 978-0-7918-8410-2
Éditeur: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-15216

Intermediate Turbine Duct Aerodynamics - Recent Results and Future Concepts (TU Graz)

Auteurs: Filippo Merli, Patrick Zeno Sterzinger, Michael Steiner, Emil Göttlich
Publié dans: Diffuser Workshop 2019, 2019
Éditeur: Institute of Turbomachinery and Fluid Dynamics, Leibnitz Universität Hannover

Experimental Research in the Field of Aero Engines at Graz University of Technology

Auteurs: Emil Göttlich
Publié dans: Transport Research Arena 2018, 2018
Éditeur: bmvit Competence Corner

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Auteurs: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Publié dans: Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Éditeur: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-14798

GT2019-92254: New Experimental Setup for Assessing Turbine Vane Frame Aerodynamic Performance

Auteurs: Filippo Merli, Andreas Peters, Patrick Zeno Sterzinger, Lukas Wiesinger, Franz Heitmeir, Emil Göttlich
Publié dans: ASME Turbo Expo 2019, 2019
Éditeur: Student Poster

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible