Turbine Research for Aerodynamical Vane-frame Improvements in Advanced Two-spool Arrangements

Informacje na temat projektu

TRAVIATA

Identyfikator umowy o grant: 785313

DOI 10.3030/785313

Projekt został zamknięty

Data podpisania przez KE 12 Lutego 2018

Data rozpoczęcia 1 Kwietnia 2018

Data zakończenia 30 Września 2021

Finansowanie w ramach

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Koszt całkowity € 1 175 000,00

Wkład UE € 1 175 000,00

Koordynowany przez

TECHNISCHE UNIVERSITAET GRAZ
Austria

Rezultaty

Documents, reports (4)

Test Campaign 2 Completed

Report describing the rig setup and assembly and listing the performed tests with highlevel results and status relative to test objectives

Plan for Communication, Dissemination and Exploitation of project results

This document will contain the updated plans for communication activities, dissemination of project results and exploitation of project results and handling of IP rights linked to project outputs.

Report on Communication, Dissemination and Exploitation actions

This document will report on the actual activities in the field of communication dissemination and exploitation of project results

Rig 2 (optimized) Analysis of Advanced Measurements (seed-gas, hot-wire, optical)

This public report contains highlights of the analyses of the measured data of Rig 2 with the new additional advanced measurement techniques seedgas hotwire optical in dimensionless format suitable also later publications

Publikacje

Thesis and dissertations (1)

Investigation of a HPT-TCF-LPT System under the Presence of Purge Flows, State-of-the-Art andFuture Improvements

Autorzy: Patrick Zeno Sterzinger
Opublikowane w: 2020
Wydawca: Faculty of Mechanical Engineering at Graz University of Technology

Peer reviewed articles (3)

Unsteady Flow Interactions Between a High- and Low-Pressure Turbine

Autorzy: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, M. Dellacasagrande, A. Peters, G. Maini, F. Heitmeir, E. Göttlich
Opublikowane w: Journal of Turbomachinery, Numer 142/10, 2020, ISSN 0889-504X
Wydawca: ASME
DOI: 10.1115/1.4046453

Impact of Varying High- and Low-Pressure Turbine Purge Flows on a Turbine Center Frame and Low-Pressure Turbine System

Autorzy: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, A. Peters, G. Maini, M. Dellacasagrande, F. Heitmeir, E. Göttlich
Opublikowane w: Journal of Turbomachinery, Numer 142/10, 2020, ISSN 0889-504X
Wydawca: ASME
DOI: 10.1115/1.4046452

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Autorzy: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Opublikowane w: Journal of Turbomachinery, Numer 143/5, 2021, ISSN 0889-504X
Wydawca: ASME
DOI: 10.1115/1.4050145

Conference proceedings (5)

The Interaction of Purge Flows With Secondary Flow Features in Turbine Center Frames

Autorzy: Marios Patinios, Filippo Merli, Asim Hafizovic, Emil Göttlich
Opublikowane w: Volume 2C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions, 2021, ISBN 978-0-7918-8492-8
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/gt2021-58586

Unsteady Effects due to Rotor Purge Flow Variations in a Dual-Spool Turbine Setup

Autorzy: F. Merli, P. Z. Sterzinger, M. Dellacasagrande, L. Wiesinger, A. Peters, F. Heitmeir, E. Göttlich
Opublikowane w: Volume 2E: Turbomachinery, 2020, ISBN 978-0-7918-8410-2
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-15216

Intermediate Turbine Duct Aerodynamics - Recent Results and Future Concepts (TU Graz)

Autorzy: Filippo Merli, Patrick Zeno Sterzinger, Michael Steiner, Emil Göttlich
Opublikowane w: Diffuser Workshop 2019, 2019
Wydawca: Institute of Turbomachinery and Fluid Dynamics, Leibnitz Universität Hannover

Experimental Research in the Field of Aero Engines at Graz University of Technology

Autorzy: Emil Göttlich
Opublikowane w: Transport Research Arena 2018, 2018
Wydawca: bmvit Competence Corner

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Autorzy: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Opublikowane w: Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-14798

Other (1)

GT2019-92254: New Experimental Setup for Assessing Turbine Vane Frame Aerodynamic Performance

Autorzy: Filippo Merli, Andreas Peters, Patrick Zeno Sterzinger, Lukas Wiesinger, Franz Heitmeir, Emil Göttlich
Opublikowane w: ASME Turbo Expo 2019, 2019
Wydawca: Student Poster