Turbine Research for Aerodynamical Vane-frame Improvements in Advanced Two-spool Arrangements

Informazioni relative al progetto

TRAVIATA

ID dell’accordo di sovvenzione: 785313

DOI 10.3030/785313

Progetto chiuso

Data della firma CE 12 Febbraio 2018

Data di avvio 1 Aprile 2018

Data di completamento 30 Settembre 2021

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale € 1 175 000,00

Contributo UE € 1 175 000,00

Coordinato da

TECHNISCHE UNIVERSITAET GRAZ
Austria

Risultati finali

Documents, reports (4)

Test Campaign 2 Completed

Report describing the rig setup and assembly and listing the performed tests with highlevel results and status relative to test objectives

Plan for Communication, Dissemination and Exploitation of project results

This document will contain the updated plans for communication activities, dissemination of project results and exploitation of project results and handling of IP rights linked to project outputs.

Report on Communication, Dissemination and Exploitation actions

This document will report on the actual activities in the field of communication dissemination and exploitation of project results

Rig 2 (optimized) Analysis of Advanced Measurements (seed-gas, hot-wire, optical)

This public report contains highlights of the analyses of the measured data of Rig 2 with the new additional advanced measurement techniques seedgas hotwire optical in dimensionless format suitable also later publications

Pubblicazioni

Thesis and dissertations (1)

Investigation of a HPT-TCF-LPT System under the Presence of Purge Flows, State-of-the-Art andFuture Improvements

Autori: Patrick Zeno Sterzinger
Pubblicato in: 2020
Editore: Faculty of Mechanical Engineering at Graz University of Technology

Peer reviewed articles (3)

Unsteady Flow Interactions Between a High- and Low-Pressure Turbine

Autori: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, M. Dellacasagrande, A. Peters, G. Maini, F. Heitmeir, E. Göttlich
Pubblicato in: Journal of Turbomachinery, Numero 142/10, 2020, ISSN 0889-504X
Editore: ASME
DOI: 10.1115/1.4046453

Impact of Varying High- and Low-Pressure Turbine Purge Flows on a Turbine Center Frame and Low-Pressure Turbine System

Autori: P. Z. Sterzinger, S. Zerobin, F. Merli, L. Wiesinger, A. Peters, G. Maini, M. Dellacasagrande, F. Heitmeir, E. Göttlich
Pubblicato in: Journal of Turbomachinery, Numero 142/10, 2020, ISSN 0889-504X
Editore: ASME
DOI: 10.1115/1.4046452

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Autori: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Pubblicato in: Journal of Turbomachinery, Numero 143/5, 2021, ISSN 0889-504X
Editore: ASME
DOI: 10.1115/1.4050145

Conference proceedings (5)

The Interaction of Purge Flows With Secondary Flow Features in Turbine Center Frames

Autori: Marios Patinios, Filippo Merli, Asim Hafizovic, Emil Göttlich
Pubblicato in: Volume 2C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions, 2021, ISBN 978-0-7918-8492-8
Editore: American Society of Mechanical Engineers
DOI: 10.1115/gt2021-58586

Unsteady Effects due to Rotor Purge Flow Variations in a Dual-Spool Turbine Setup

Autori: F. Merli, P. Z. Sterzinger, M. Dellacasagrande, L. Wiesinger, A. Peters, F. Heitmeir, E. Göttlich
Pubblicato in: Volume 2E: Turbomachinery, 2020, ISBN 978-0-7918-8410-2
Editore: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-15216

Intermediate Turbine Duct Aerodynamics - Recent Results and Future Concepts (TU Graz)

Autori: Filippo Merli, Patrick Zeno Sterzinger, Michael Steiner, Emil Göttlich
Pubblicato in: Diffuser Workshop 2019, 2019
Editore: Institute of Turbomachinery and Fluid Dynamics, Leibnitz Universität Hannover

Experimental Research in the Field of Aero Engines at Graz University of Technology

Autori: Emil Göttlich
Pubblicato in: Transport Research Arena 2018, 2018
Editore: bmvit Competence Corner

Impact of Turbine-Strut Clocking on the Performance of a Turbine Center Frame

Autori: P. Z. Sterzinger, F. Merli, A. Peters, S. Behre, F. Heitmeir, E. Göttlich
Pubblicato in: Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Editore: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-14798

Other (1)

GT2019-92254: New Experimental Setup for Assessing Turbine Vane Frame Aerodynamic Performance

Autori: Filippo Merli, Andreas Peters, Patrick Zeno Sterzinger, Lukas Wiesinger, Franz Heitmeir, Emil Göttlich
Pubblicato in: ASME Turbo Expo 2019, 2019
Editore: Student Poster