Assembly Tooling for the Fast Rotorcraft Project

Informazioni relative al progetto

ASTRO

ID dell’accordo di sovvenzione: 785355

DOI

10.3030/785355

Progetto concluso il 28 Giugno 2021

Data della firma CE 13 Febbraio 2018

Data di avvio 1 Marzo 2018

Data di completamento 28 Febbraio 2022

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 712 500,00

Contributo UE

€ 498 750,00

Coordinato da

LANGA INDUSTRIAL SA
Spain

Periodic Reporting for period 3 - ASTRO (Assembly Tooling for the Fast Rotorcraft Project)

Periodo di rendicontazione: 2020-09-01 al 2022-02-28

Sintesi del contesto e degli obiettivi generali del progetto

The objective of the project is to get a complete set of assembly and maintenance tooling, including auxiliary tooling. Due to
the tight tolerances required in aeronautical industry, Some assembly jigs will be equipped with an optical structured light
measure system that will allow the set up of the tooling and the position verification of the parts during assembly with
tolerances equal or under 0.1 mm. The use of this kind of systems are spearhead in the field of precision measurement and
the advantages against currently measurement systems, as laser tracker, will be shown in following paragraphs. In addition,
optical systems are becoming the preferred measurement systems in automatized assembly jigs which will be the step
forward in the aeronautical assembly lines.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

Performed activities Assembly Tooling:
Requirements freeze: tooling requirements defined with AIRBUS.
Tools interface with Rotorcraft defined.
Complete definition of the assembly tooling with 3D designs.
Tools in operation defined.
Interferences in operation with helicopter solved.
Manufacturing 2D drawings and operation manuals ongoing.

Performed activities Maintenance Tooling:
Design of the Assembly-Maintenance platforms.

Performed activities Management:
Management of project costs and grant agreement aspects.
Monitoring and checking of technical work.
Monitoring of administrative aspects and objectives follow up

Performed activities of the OPTICAL MEASUREMENT SYSTEM:
Complete definition of the measurement system based in cameras and structured light

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

Main impact of the project is the high technical challenge of Wing Support Tool. High precision needed for wing positioning and a platform with 6 freedom degrees could be used in future equipments for military as well as civil purposes.

General view. Dedicated tooling