Appearance Printing - European Advanced Research School | ApPEARS | Project | Results | H2020 | CORDIS

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Measurement of the BRDF over the visible spectral range at a submillimeter scale

For some materials such as fabric, wood or leathers, the distance of observation greatly influences its appearance. Knowing the optical properties at a micrometric scale of these materials is important to understand and reproduce the appearance of the full object. However, there is no existing goniospectrophotometer that can perform BRDF measurement at a submillimetric scale. In fact, decreasing the spatial resolution of BRDF measurements brings forward specific metrological issues that have so far not been addressed. During the project, we will build a set-up allowing to investigate BRDF at a micrometric scale and to establish a multi-scale traceability between small measurement areas and classic measurement areas.

System (model, algorithms, software) for modelling identified parameters

An appearance modeling system for design and print of novel 3D surface microstructures based on manipulation of print and post-processing parameters.

Image quality metric for material reproduction

A mathematical model to measure difference in image quality for material reprodcution

Colour model for 2.5D printing (including forward and inverse models)

A colour prediction model for appearance printing, predicting the spectral outcome of the print, customized for the special inks and colour mixing technique employed.

Methods and strategies for gonio-chromatic gamut mapping

A report/publication discussing methods and strategies for gonio-chromatic gamut mapping

Algorithms for resin selection and generative design to meet applications demands

A report/publication that will discuss about extending existing 3D printing appearance reproduction technologies by a resin selection algorithm and by generative design algorithms to meet application demands.

Perceptual model for material appearance

A mathematical model for predicting perceptual material appearance

Two production demonstrators that describe the use of the system (5.6) to meet requirements associated with industrial or artistic use cases.

Based on our existing collaborations with industrial partners, we will identify two industrially relevant use cases. The system developed in deliverable 5.6 will then be applied to develop demonstrators.

Extended model for appearance printing, including angular variation

An extended colour prediction model, that also considers the angle dependency and varying gloss level, caused by the surface height variation in 2.5D and 3D printing.

Practical demonstration of materials and inks development, leading to patents, technical reports

A technical report (or patent if possible) about inks and material development within Appearance printing

Description of new attributes for visual appearance

Proposal for new visual appearance attributes

Novel methods for structure based halftoning

A structure-based halftoning model, that adaptively changes the halftone shape and dot size depending on the image content and structure, to better mimic the appearance of surfaces and materials.

Generation of micro- and nano-textured surfaces

A report/publication discussing micro-nano textured surfaces and methods for generation

Report on multiscale traceability of BRDF measurement

To establish a multi-scale traceability between small measurement areas and classic measurement areas we have developed a new goniospectrophotometer which can measure the BRDF in micron scale. As we have described in our previous deliverable that the knowledge about optical properties at a micrometric scale of materials is important to understand and reproduce the appearance of the full object. So, to prove the difference of measurement in micron scale we will perform a comparative study by measuring BRDF with illumination beam of different scale like: 100micron,1mm and 1cm. And to validate our measurement we will develop new model of our customized sample. In further this procedure can be applied to natural (wood, leather, fabric etc.) and 3D printed materials.

Implementation framework for 2.5D colour reproduction, in the form of an open-source code repository, that can be used to develop other applications in 2.5D reproduction

An open source code repository for development of applications in 2.5D reproductions

Extended halftoning model for 2.5D appearance printing

An extended halftoning model, determining also the optimal 3D dot placement, to control both colour properties and surface height variation.

Database of vector based brush strokes and sample prints that demonstrate the range of printed materials

Creating a database of vector based brush strokes and sample prints to demonstrate the range of printed materials

New model establishing correlation between surface parameters and optical parameters

A mathematical model correlating surface parameters and optical parameters for printed appearance matching

Identification and development of case studies of different users, markets, and applications.

A case study report on different users, markets and application within the field of Appearance printing

Channel mixing models that predict 2.5D appearance attributes from input channels; and their inverse, which predict output channels to match specified appearance attributes

Mathematical model to predict 2.5D appearance attributes from input channels.

Working prototype software for accurate 3D visualization of textured surfaces

Prototype software code for accurate 3D visualisation of textured surfaces

Common work environment for different printers and materials

A report/publication on common working space for printers and materials in 2.5D and 3D printing techniques

Individual PhD thesis / Doctoral degrees awarded

Successful submission of the PhD thesis

Transferable skills courses

Successfully completion of the transferable skills courses planned within the project by the ESRs

ApPEARS vacancies advertised

A report on the vacancy advertisement.

International Symposium and Final Conference

Dissemination of results and findings at international conference and symposiums

Scientific courses

Successfully completion of the scientific courses planned within the project by the ESRs

Public dissemination of project results (after protection), including peer reviewed publications

Report on the strategy to be followed for public dessemination of project results (after protection), including peer reviewed publications.

Scientific report on guidelines for subjective and objective evaluation of relief

A report on subjective and objective evaluation of material appearance for relief printed material/objects

Evaluation of pros and cons of state-of-the-art solutions, tests and user cases

A report presenting the state of the art solutions, tests and user cases for appearance printing using 2.5D print techniques

Project website

Project website for dissemination of project results and communication.

Publications

Advancing Material Appearance Measurement: A Cost- Effective Multispectral Imaging System for Capturing SVBRDF and BTF

Author(s): Ansari-Asl, Majid; Barbieri, Markus; Obein, Gaël; Hardeberg, Jon Yngve
Published in: London Imaging Meeting, Issue 1, 2023
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.25

3D Halftoning based on Iterative Method Controlling Dot Placement

Author(s): Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Published in: IS&T Printing for Fabrication 2020, 2021
Publisher: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.69

Physical patient simulators for surgical training: a review

Author(s): Marine Shao, Carinna Parraman, David Huson
Published in: London Imaging Meeting, Issue 2020/1, 2020, Page(s) 124-128, ISSN 2694-118X
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-05

Implementing directional reflectance in a colour managed workflow

Author(s): Tanzima Habib, Phil Green, Aditya Sole
Published in: London Imaging Meeting, Issue 2020/1, 2020, Page(s) 119-123, ISSN 2694-118X
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-33

Surface Discretisation Effects on 3D Printed Surface Appearance

Author(s): Pranovich, Alina; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Published in: CEUR Workshop Proceedings, Issue vol. 2688, 2020
Publisher: CEUR Workshop Proceedings
DOI: 10.5281/zenodo.4081343

Tactile prints in colour: Studying the Visual Appearance of 2.5D Prints for Heritage Recreations

Author(s): Trujillo Vazquez, Abigail; Rodriguez Echavarria, Karina; Weyrich, Tim
Published in: EUROGRAPHIICS Workshop on Graphics and Cultural Heritage, Issue 1, 2023
Publisher: Eurographics Digital Library
DOI: 10.2312/gch.20221225

Fast Impression Painting Using Multi-color Fused Deposition Modeling with a Diamond Hotend

Author(s): Tonello, Riccardo; Abedini, Fereshteh; Bue Pedersen, David; Revall Frisvad, Jeppe
Published in: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA, 2022
Publisher: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA
DOI: 10.5281/zenodo.7118722

A weighted goodness-of-fit metric for comparison of spectra

Author(s): Habib, T., P. Green, P. Nussbaum
Published in: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Publisher: International Colour Association

An Investigation on Visual Colour Difference of 3D Printed Objects

Author(s): He, R., K. Xiao., M. Pointer, M. Melgosa, Y. Bressler
Published in: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Publisher: the International Colour Association (AIC)

Assessing skin tone heterogeneity under various light sources

Author(s): Ruili He, Kaida Xiao, Michael Pointer, Stephen Westland
Published in: London Imaging Meeting, Issue 2020/1, 2020, Page(s) 5-9, ISSN 2694-118X
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-15

Camera Response Function Assessment in Multispectral HDR Imaging

Author(s): Ansari-Asl, Majid Thomas, Jean-Baptiste Hardeberg, Jon Yngve
Published in: Electronic Imaging 2022, 2022
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/ei.2022.34.15.color-141

Benchmarking modern gloss correlators with established ISO 2813 standard and visual judgment of gloss

Author(s): Donatela Šarić, Andreas Kraushaar, Marco Mattuschka, Phil Green
Published in: Color and Imaging Conference, 2021
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.306

Estimation of BRDF Measurements for Printed Colour Samples

Author(s): Habib, Tanzima; Phil Green; Peter Nussbaum
Published in: the 29th Color and Imaging Conference (CIC29), 2021
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.123

Spectral reproduction: drivers, use cases and workflow

Author(s): Tanzima Habib, Phil Green, Peter Nussbaum
Published in: Electronic Imaging, Issue 2020/15, 2020, Page(s) 121-1-121-6, ISSN 2470-1173
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2470-1173.2020.15.color-121

Naturalness perception of 2.5D prints: elevation and size of prints relation

Author(s): Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen; Weijkamp, Clemens; Horiuchi, Takahiko
Published in: London Imaging Meeting, Issue 5, 2023
Publisher: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.05

The reconstruction of the appearance of the Acancéh frieze by 2.5D printing

Author(s): Klein, Susanne; Trujillo Vazquez, Abigail; Aure Calvet, Xavi; Parraman, Carinna
Published in: IS&T Printing for Fabrication 2020, 2021
Publisher: The Society for Imaging Science and Technology
DOI: 10.5281/zenodo.4727289

A study on attributes for 2.5D print quality assessment

Author(s): Altynay Kadyrova, Vlado Kitanovski, Marius Pedersen
Published in: Color and Imaging Conference, Issue 2020/28, 2020, Page(s) 19-24, ISSN 2166-9635
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.4

3D Surface Structures and 3D Halftoning

Author(s): Gooran, Sasan; Abedini, Fereshteh
Published in: Is&T Printing for Fabrication 2020, 2021
Publisher: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.75

Retrieving the ancient colours: artistic practice as a tool for heritage reconstruction

Author(s): Abigail Trujillo Vazquez, Susanne Klein, Xavi Aure Calvet, Carinna Parraman
Published in: Color and Imaging Conference, Issue 2020/28, 2020, Page(s) 282-287, ISSN 2166-9635
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.45

Development of a µBRDF goniospectrophotometer for BRDF measurement on tiny surfaces

Author(s): Saha, Dipanjana Gevaux, L. Cances, T. Richard, A. Obein, Gaël
Published in: CIE 2021 Midterm Conference, CIE, 2022
Publisher: HAL Open Science
DOI: 10.25039/x48.2021.op42

Optical properties and appearance of fused deposition modelling filaments

Author(s): Pranovich, Alina Gooran, Sasan Frisvad, Jeppe Revall Nyström, Daniel
Published in: "47th IARIGAI International Conference on ""Advances in Print and Media Technology"" (Iarigai)", 2021
Publisher: Iarigai
DOI: 10.14622/advances_47_2021

Multi-Layer Halftoning for Poly-jet 3D Printing

Author(s): Abedini, Fereshteh; Hlayhel, Raed; Gooran, Sasan; Nyström, Daniel; Suneel Sole, Aditya
Published in: London Imaging Meeting 2023, Issue 3, 2023
Publisher: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.08

Real-time Style Transfer for Videos to Enhance the Realism of Simulation of Laparoscopic Surgeries

Author(s): Shao, Marine Clark, James Huson, David Hardeberg, Jon Yngve
Published in: 10th European Workshop on Visual Information Processing (EUVIP), 2022
Publisher: IEEE
DOI: 10.1109/euvip53989.2022.9922706

Image enhancement dataset for evaluation of image quality metrics

Author(s): Kadyrova, Altynay; Pedersen, Marius; Ahmad, Bilal; Mandal, Dipendra J.; Nguyen, Mathieu; Zimmerman, Pauline Hardeberg
Published in: Proc. IS&T Int’l. Symp. on Electronic Imaging: Image Quality and System Performance, Issue 1, 2022
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/EI.2022.34.9.IQSP-317

Influence of the printing direction on the surface appearance in multi-material fused filament fabrication

Author(s): Tonello, R., Mollah, M. T., Weiss, K., Spangenberg, J., Strandlie, A., Pedersen, D. B., and Frisvad, J. R.
Published in: Proceedings of CAD/Graphics 2023. Lecture Notes in Computer Science, 2023
Publisher: Springer

BRDF rendering by interpolation of optimised model parameters

Author(s): Tanzima Habib, Phil Green, Peter Nussbaum
Published in: Color and Imaging Conference, Issue 2020/28, 2020, Page(s) 162-168, ISSN 2166-9635
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.25

Recreating the Relief of the Temple of the Jaguars: Exploring Digital and Analogue 2.5D Printing of Mesoamerican Imagery

Author(s): Trujillo Vazquez, Abigail; Aure, Xavier; Klein, Susanne; Parraman, Carinna
Published in: Printing for Fabrication 2021 (Print4Fab 2021), 2021
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-4451.2021.37.41

Angular dependent reflectance spectroscopy of RGBW pigments

Author(s): Pranovich, Alina; Trujillo Vazquez, Abigail; Nyström, Daniel; Valyukh, Sergiy; Frisvad, Jeppe Revall; Klein, Susanne; Parraman, Carinna
Published in: DIVA, Issue 1, 2022
Publisher: Advances in Printing and Media Technology
DOI: 10.14622/Advances_48_2022_13

The Effect of Halftoning on the Appearance of 3D Printed Surfaces

Author(s): Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Published in: Iarigai, 2022
Publisher: IARIGAI
DOI: 10.5281/zenodo.7014365

Additive manufacturing of multilayered polymer composites: Durability assessment

Author(s): Payami Golhin, Ali; Srivastava, Chaman; Tingstad, Jens Fossan; Sole, Aditya Suneel; Strandlie, Are; Grammatikos, Sotirios
Published in: Issue 1, 2022
Publisher: the European Conference on Composite Materials

The Influence of Wedge Angle, Feedstock Color, and Infill Density on the Color Difference of FDM Objects

Author(s): Payami Golhin, Ali; Strandlie, Are; Green, Phil
Published in: Twenty-ninth Color and Imaging Conference (CIC29), 2021
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.5.050408

Investigation on color characterization methods for 3D printer

Author(s): He, Ruili; Xiao, Kaida; Pointer, Michael
Published in: London Imaging Meeting, Issue 1, 2023
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.18

Influence of procedural noise on the glossiness of 2.5D printed patches

Author(s): Trujillo Vazquez, Abigail; Saric, Donatela; Klein, Susanne; Parraman, Carinna
Published in: The 29th Color and Imaging Conference (CIC29), 2021
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.105

A novel camera colour characterisation model for the colour measurement of human skin

Author(s): Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Published in: Electronic Imaging, 2020, ISSN 2470-1173
Publisher: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2470-1173.2021.16.COLOR-222

Displaced signed distance fields for additive manufacturing

Author(s): Alan Brunton, Lubna Abu Rmaileh
Published in: ACM Transactions on Graphics, 2021
Publisher: Association for Computing Machinery
DOI: 10.1145/3450626.3459827

A mathematical model for gloss prediction of 2D prints

Author(s): Saric, Donatela; Kraushaar, Andreas; Suneel Sole, Aditya
Published in: London Imaging Meeting, Issue 1, 2023
Publisher: Society for Imaging Science and Technology,
DOI: 10.2352/lim.2023.4.1.13

Effect of Halftones on Printing Iridescent Colors

Author(s): Abedini, Fereshteh; Trujillo Vazquez, Abigail; Gooran, Sasan; Klein, Susanne
Published in: Electronic Imaging, Issue 1, 2023
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/EI.2023.35.15.COLOR-206

Simulation of laparoscopic ultrasound imaging and suturing of the bile duct using silicone

Author(s): M. Shao, D. Huson, J. Clark
Published in: Proc. SPIE 12034, Medical Imaging 2022: Image-Guided Procedures, Robotic Interventions, and Modeling, 2022
Publisher: SPIE
DOI: 10.1117/12.2611340

Evaluation of surface roughness and periodical layers in material jetting

Author(s): Ali Payami Golhin; Aditya Suneel Sole; Are Strandlie
Published in: Euspen's 23rd International Conference & Exhibition (ICE23) , Copenhagen, Denmark, 12-16 June 2023, Issue 1, 2023
Publisher: Zenodo
DOI: 10.5281/zenodo.8351945

Effects of accelerated aging on the appearance and mechanical performance of materials jetting products

Author(s): Ali Payami Golhin; Chaman Srivastava; Are Strandlie; Aditya Suneel Sole; Sotirios Grammatikos
Published in: 228, Issue 1, 2023, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2023.111863

Investigating the optical translucency of Spectralon using BSSRDF measurements

Author(s): Lou Gevaux; Dipanjana Saha; Gaël Obein
Published in: Crossref, Issue 1, 2023, ISSN 2155-3165
Publisher: Optica Publishing Group
DOI: 10.1364/ao.491929

Effect of various ink types on naturalness perception of 2.5 D prints

Author(s): Kadyrova, Altynay Pedersen, Marius Westland, Stephen Weijkamp, Clemens
Published in: Journal of Print and Media Technology Research, 2022, ISSN 2223-8905
Publisher: Iarigai
DOI: 10.14622/jpmtr-2215

The Amber Project: A Survey of Methods and Inks for the Reproduction of the Color of Translucent Objects

Author(s): Trujillo-Vazquez , Abigail; Fuller, Harrie; Klein, Susanne; Parraman, Carinna
Published in: Applied Sciences, Issue 12, 2022, Page(s) 793, ISSN 2076-3417
Publisher: MDPI
DOI: 10.3390/app12020793

Printing with tonalli: Reproducing Featherwork from Precolonial Mexico Using Structural Colorants

Author(s): Trujillo Vazquez, Abigail; Abedini, Fereshteh; Pranovich, Alina; Parraman, Carinna; Klein, Susanne
Published in: Colorants, Issue 4, 2023, ISSN 2079-6447
Publisher: MDPI
DOI: 10.3390/colorants2040033

Spectral Reconstruction Using an Iteratively Reweighted Regulated Model from Two Illumination Camera Responses

Author(s): Liu, Zhen; Xiao, Kaida; Pointer, Michael R.; He, Ruili; Xie, Xuejun
Published in: Sensors, Issue 14248220, 2021, ISSN 1424-8220
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21237911

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

Author(s): Riccardo Tonello; Knut Conradsen; David Bue Pedersen; Jeppe Revall Frisvad
Published in: Polymers; Volume 15; Issue 13; Pages: 2967, Issue 1, 2023, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym15132967

Optical properties of tilted surfaces in material jetting

Author(s): Payami Golhin, Ali Strandlie, Are
Published in: Optics & Laser Technology, 2023, ISSN 1879-2545
Publisher: Elsevier
DOI: 10.1016/j.optlastec.2023.109992

Optimizing Parametric Factors in CIELAB and CIEDE2000 Color-Difference Formulas for 3D-Printed Spherical Objects

Author(s): Ruili He; Kaida Xiao; Michael Pointer; Manuel Melgosa; Yoav Bressler
Published in: Materials, Issue 19961944, 2022, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma15124055

Surface roughness of as-printed polymers: a comprehensive review

Author(s): Ali Payami Golhin; Riccardo Tonello; Jeppe Revall Frisvad; Sotirios Grammatikos; Are Strandlie
Published in: The International Journal of Advanced Manufacturing Technology, Issue 1, 2023, ISSN 1433-3015
Publisher: Springer
DOI: 10.1007/s00170-023-11566-z

Three-Dimensional Adaptive Digital Halftoning

Author(s): Gooran, Sasan; Abedini, Fereshteh
Published in: Journal of Imaging Science and Technology, Issue 1, 2022, ISSN 1062-3701
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/J.ImagingSci.Technol.2022.66.6.060403

Effect of Elevation and Surface Roughness on Naturalness Perception of 2.5D Decor Prints

Author(s): Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Published in: Materials, Issue 1, 2022, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma15093372

Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning

Author(s): Lezhong Wang; Siavash Arjomand Bigdeli; Anders Nymark Christensen; Milena Corredig; Riccardo Tonello; Anders Bjorholm Dahl; Jeppe Revall Frisvad
Published in: Wang , L , Arjomand Bigdeli , S , Nymark Christensen , A , Corredig , M , Tonello , R , Dahl , A B & Frisvad , J R 2023 , ' Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning ' , Optical Materials Express , vol. 13 , no. 5 , 5 , pp. 1457-1474 . https://doi.org/10.1364/OME.486542, Issue 1, 2023, ISSN 2155-3165
Publisher: Optica Publishing Group
DOI: 10.1364/ome.486542

Development and validation of a hybrid simulator for ultrasound-guided laparoscopic common bile duct exploration

Author(s): Marine Y. Shao; Mohamed Aburrous; David Huson; Carinna Parraman; Jon Y. Hardeberg; James Clark
Published in: Surgical endooscopy, Issue 1, 2023, ISSN 1432-2218
Publisher: Springer
DOI: 10.1007/s00464-023-10168-w

Development of an image-based measurement system for human facial skin colour

Author(s): Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Published in: Color Research and Application, Issue 03612317, 2022, Page(s) 288-300, ISSN 0361-2317
Publisher: John Wiley & Sons Inc.
DOI: 10.1002/col.22737

Dot Off Dot Screen Printing with RGBW Reflective Inks

Author(s): Pranovich, Alina; Valyukh, Sergiy; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Published in: Journal of Imaging Science and Technology, Issue 2, 2023, ISSN 1943-3522
Publisher: Society for Imagaing Sciecne and Technology
DOI: 10.2352/j.imagingsci.technol.2023.67.3.030404

Visually Significant Dimensions and Parameters for Gloss

Author(s): Šaric, Donatela; Suneel Sole, Aditya
Published in: Jouranal of imaging, Issue 1, 2023, ISSN 2313-433X
Publisher: MDPI
DOI: 10.3390/jimaging10010010

Color appearance in rotational material jetting

Author(s): Are Strandlie; Aditya Sole; Ali Payami Golhin
Published in: The International Journal of Advanced Manufacturing Technology, Issue 1, 2022, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.21203/rs.3.rs-1754999/v1

Structure aware halftoning using the iterative method controlling the dot placement

Author(s): Abedini, Fereshteh; Gooran, Sasan; Kitanovski, Vlado; Nyström, Daniel
Published in: Journal of Imaging Science and Technology, Issue 10623701, 2021, ISSN 1062-3701
Publisher: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.6.060404

Towards a Low-Cost Monitor-Based Augmented Reality Training Platform for At-Home Ultrasound Skill Development

Author(s): Marine Y. Shao; Tamara Vagg; Matthias Seibold; Mitchell Doughty
Published in: Journal of Imaging; Volume 8; Issue 11; Pages: 305, Issue 1, 2022, ISSN 2313-433X
Publisher: MDPI
DOI: 10.3390/jimaging8110305

What Elevation Makes 2.5D Prints Perceptually Natural?

Author(s): Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Published in: Materials, Issue 19961944, 2022, Page(s) 3573, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma15103573

Appearance evaluation of digital materials in material jetting

Author(s): Payami Golhin, A., A. Strandlie
Published in: Optics and lasers in engineering, 2023, ISSN 1873-0302
Publisher: Elsevier
DOI: 10.1016/j.optlaseng.2023.107632

Quality Assessment of 2.5D Prints Using 2D Image Quality Metrics

Author(s): Kadyrova, Altynay; Kitanovski, Vlado; Pedersen, Marius
Published in: Applied Sciences, Issue 20763417, 2021, ISSN 2076-3417
Publisher: MDPI
DOI: 10.3390/app11167470

Meso-Facets for Goniochromatic 3D Printing

Author(s): Abu Rmaileh, Lubna Brunton, Alan
Published in: ACM Journals, 2023, ISSN 0004-5411
Publisher: Association for Computing Machinary, Inc.
DOI: 10.1145/3592137

BRDF representation in response to the build orientation in 3D-printed digital materials

Author(s): Payami Golhin, Ali; Sole, Aditya; Strandlie, Are
Published in: Journal of Manufacturing Processes, Issue 1, 2023, ISSN 1526-6125
Publisher: Elsevier BV
DOI: 10.1016/j.jmapro.2023.09.016

Structure-Aware Color Halftoning with Adaptive Sharpness Control

Author(s): Abedini, Fereshteh; Gooran, Sasan
Published in: Journal of Imaging Science and Technology, Issue 1, 2022, ISSN 1943-3522
Publisher: Society for Imaging science and technology
DOI: 10.2352/j.imagingsci.technol.2022.66.6.060404

Quality Assessment of 2.5D Prints

Author(s): Kadyrova, Altynay
Published in: Issue 1, 2023
Publisher: NTNU Open

Searching for OpenAIRE data...

Appearance Printing - European Advanced Research School

Deliverables

Publications

Share this page Share this page on social networks

Download Download the content of the page