Appearance Printing - European Advanced Research School | ApPEARS | Proyecto | Resultados | H2020 | CORDIS

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Measurement of the BRDF over the visible spectral range at a submillimeter scale

For some materials such as fabric, wood or leathers, the distance of observation greatly influences its appearance. Knowing the optical properties at a micrometric scale of these materials is important to understand and reproduce the appearance of the full object. However, there is no existing goniospectrophotometer that can perform BRDF measurement at a submillimetric scale. In fact, decreasing the spatial resolution of BRDF measurements brings forward specific metrological issues that have so far not been addressed. During the project, we will build a set-up allowing to investigate BRDF at a micrometric scale and to establish a multi-scale traceability between small measurement areas and classic measurement areas.

System (model, algorithms, software) for modelling identified parameters

An appearance modeling system for design and print of novel 3D surface microstructures based on manipulation of print and post-processing parameters.

Image quality metric for material reproduction

A mathematical model to measure difference in image quality for material reprodcution

Colour model for 2.5D printing (including forward and inverse models)

A colour prediction model for appearance printing, predicting the spectral outcome of the print, customized for the special inks and colour mixing technique employed.

Methods and strategies for gonio-chromatic gamut mapping

A report/publication discussing methods and strategies for gonio-chromatic gamut mapping

Algorithms for resin selection and generative design to meet applications demands

A report/publication that will discuss about extending existing 3D printing appearance reproduction technologies by a resin selection algorithm and by generative design algorithms to meet application demands.

Perceptual model for material appearance

A mathematical model for predicting perceptual material appearance

Two production demonstrators that describe the use of the system (5.6) to meet requirements associated with industrial or artistic use cases.

Based on our existing collaborations with industrial partners, we will identify two industrially relevant use cases. The system developed in deliverable 5.6 will then be applied to develop demonstrators.

Extended model for appearance printing, including angular variation

An extended colour prediction model, that also considers the angle dependency and varying gloss level, caused by the surface height variation in 2.5D and 3D printing.

Practical demonstration of materials and inks development, leading to patents, technical reports

A technical report (or patent if possible) about inks and material development within Appearance printing

Description of new attributes for visual appearance

Proposal for new visual appearance attributes

Novel methods for structure based halftoning

A structure-based halftoning model, that adaptively changes the halftone shape and dot size depending on the image content and structure, to better mimic the appearance of surfaces and materials.

Generation of micro- and nano-textured surfaces

A report/publication discussing micro-nano textured surfaces and methods for generation

Report on multiscale traceability of BRDF measurement

To establish a multi-scale traceability between small measurement areas and classic measurement areas we have developed a new goniospectrophotometer which can measure the BRDF in micron scale. As we have described in our previous deliverable that the knowledge about optical properties at a micrometric scale of materials is important to understand and reproduce the appearance of the full object. So, to prove the difference of measurement in micron scale we will perform a comparative study by measuring BRDF with illumination beam of different scale like: 100micron,1mm and 1cm. And to validate our measurement we will develop new model of our customized sample. In further this procedure can be applied to natural (wood, leather, fabric etc.) and 3D printed materials.

Implementation framework for 2.5D colour reproduction, in the form of an open-source code repository, that can be used to develop other applications in 2.5D reproduction

An open source code repository for development of applications in 2.5D reproductions

Extended halftoning model for 2.5D appearance printing

An extended halftoning model, determining also the optimal 3D dot placement, to control both colour properties and surface height variation.

Database of vector based brush strokes and sample prints that demonstrate the range of printed materials

Creating a database of vector based brush strokes and sample prints to demonstrate the range of printed materials

New model establishing correlation between surface parameters and optical parameters

A mathematical model correlating surface parameters and optical parameters for printed appearance matching

Identification and development of case studies of different users, markets, and applications.

A case study report on different users, markets and application within the field of Appearance printing

Channel mixing models that predict 2.5D appearance attributes from input channels; and their inverse, which predict output channels to match specified appearance attributes

Mathematical model to predict 2.5D appearance attributes from input channels.

Working prototype software for accurate 3D visualization of textured surfaces

Prototype software code for accurate 3D visualisation of textured surfaces

Common work environment for different printers and materials

A report/publication on common working space for printers and materials in 2.5D and 3D printing techniques

Individual PhD thesis / Doctoral degrees awarded

Successful submission of the PhD thesis

Transferable skills courses

Successfully completion of the transferable skills courses planned within the project by the ESRs

ApPEARS vacancies advertised

A report on the vacancy advertisement.

International Symposium and Final Conference

Dissemination of results and findings at international conference and symposiums

Scientific courses

Successfully completion of the scientific courses planned within the project by the ESRs

Public dissemination of project results (after protection), including peer reviewed publications

Report on the strategy to be followed for public dessemination of project results (after protection), including peer reviewed publications.

Scientific report on guidelines for subjective and objective evaluation of relief

A report on subjective and objective evaluation of material appearance for relief printed material/objects

Evaluation of pros and cons of state-of-the-art solutions, tests and user cases

A report presenting the state of the art solutions, tests and user cases for appearance printing using 2.5D print techniques

Project website

Project website for dissemination of project results and communication.

Publicaciones

Advancing Material Appearance Measurement: A Cost- Effective Multispectral Imaging System for Capturing SVBRDF and BTF

Autores: Ansari-Asl, Majid; Barbieri, Markus; Obein, Gaël; Hardeberg, Jon Yngve
Publicado en: London Imaging Meeting, Edición 1, 2023
Editor: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.25

3D Halftoning based on Iterative Method Controlling Dot Placement

Autores: Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Publicado en: IS&T Printing for Fabrication 2020, 2021
Editor: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.69

Physical patient simulators for surgical training: a review

Autores: Marine Shao, Carinna Parraman, David Huson
Publicado en: London Imaging Meeting, Edición 2020/1, 2020, Página(s) 124-128, ISSN 2694-118X
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-05

Implementing directional reflectance in a colour managed workflow

Autores: Tanzima Habib, Phil Green, Aditya Sole
Publicado en: London Imaging Meeting, Edición 2020/1, 2020, Página(s) 119-123, ISSN 2694-118X
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-33

Surface Discretisation Effects on 3D Printed Surface Appearance

Autores: Pranovich, Alina; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Publicado en: CEUR Workshop Proceedings, Edición vol. 2688, 2020
Editor: CEUR Workshop Proceedings
DOI: 10.5281/zenodo.4081343

Tactile prints in colour: Studying the Visual Appearance of 2.5D Prints for Heritage Recreations

Autores: Trujillo Vazquez, Abigail; Rodriguez Echavarria, Karina; Weyrich, Tim
Publicado en: EUROGRAPHIICS Workshop on Graphics and Cultural Heritage, Edición 1, 2023
Editor: Eurographics Digital Library
DOI: 10.2312/gch.20221225

Fast Impression Painting Using Multi-color Fused Deposition Modeling with a Diamond Hotend

Autores: Tonello, Riccardo; Abedini, Fereshteh; Bue Pedersen, David; Revall Frisvad, Jeppe
Publicado en: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA, 2022
Editor: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA
DOI: 10.5281/zenodo.7118722

A weighted goodness-of-fit metric for comparison of spectra

Autores: Habib, T., P. Green, P. Nussbaum
Publicado en: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Editor: International Colour Association

An Investigation on Visual Colour Difference of 3D Printed Objects

Autores: He, R., K. Xiao., M. Pointer, M. Melgosa, Y. Bressler
Publicado en: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Editor: the International Colour Association (AIC)

Assessing skin tone heterogeneity under various light sources

Autores: Ruili He, Kaida Xiao, Michael Pointer, Stephen Westland
Publicado en: London Imaging Meeting, Edición 2020/1, 2020, Página(s) 5-9, ISSN 2694-118X
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-15

Camera Response Function Assessment in Multispectral HDR Imaging

Autores: Ansari-Asl, Majid Thomas, Jean-Baptiste Hardeberg, Jon Yngve
Publicado en: Electronic Imaging 2022, 2022
Editor: Society for Imaging Science and Technology
DOI: 10.2352/ei.2022.34.15.color-141

Benchmarking modern gloss correlators with established ISO 2813 standard and visual judgment of gloss

Autores: Donatela Šarić, Andreas Kraushaar, Marco Mattuschka, Phil Green
Publicado en: Color and Imaging Conference, 2021
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.306

Estimation of BRDF Measurements for Printed Colour Samples

Autores: Habib, Tanzima; Phil Green; Peter Nussbaum
Publicado en: the 29th Color and Imaging Conference (CIC29), 2021
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.123

Spectral reproduction: drivers, use cases and workflow

Autores: Tanzima Habib, Phil Green, Peter Nussbaum
Publicado en: Electronic Imaging, Edición 2020/15, 2020, Página(s) 121-1-121-6, ISSN 2470-1173
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2470-1173.2020.15.color-121

Naturalness perception of 2.5D prints: elevation and size of prints relation

Autores: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen; Weijkamp, Clemens; Horiuchi, Takahiko
Publicado en: London Imaging Meeting, Edición 5, 2023
Editor: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.05

The reconstruction of the appearance of the Acancéh frieze by 2.5D printing

Autores: Klein, Susanne; Trujillo Vazquez, Abigail; Aure Calvet, Xavi; Parraman, Carinna
Publicado en: IS&T Printing for Fabrication 2020, 2021
Editor: The Society for Imaging Science and Technology
DOI: 10.5281/zenodo.4727289

A study on attributes for 2.5D print quality assessment

Autores: Altynay Kadyrova, Vlado Kitanovski, Marius Pedersen
Publicado en: Color and Imaging Conference, Edición 2020/28, 2020, Página(s) 19-24, ISSN 2166-9635
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.4

3D Surface Structures and 3D Halftoning

Autores: Gooran, Sasan; Abedini, Fereshteh
Publicado en: Is&T Printing for Fabrication 2020, 2021
Editor: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.75

Retrieving the ancient colours: artistic practice as a tool for heritage reconstruction

Autores: Abigail Trujillo Vazquez, Susanne Klein, Xavi Aure Calvet, Carinna Parraman
Publicado en: Color and Imaging Conference, Edición 2020/28, 2020, Página(s) 282-287, ISSN 2166-9635
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.45

Development of a µBRDF goniospectrophotometer for BRDF measurement on tiny surfaces

Autores: Saha, Dipanjana Gevaux, L. Cances, T. Richard, A. Obein, Gaël
Publicado en: CIE 2021 Midterm Conference, CIE, 2022
Editor: HAL Open Science
DOI: 10.25039/x48.2021.op42

Optical properties and appearance of fused deposition modelling filaments

Autores: Pranovich, Alina Gooran, Sasan Frisvad, Jeppe Revall Nyström, Daniel
Publicado en: "47th IARIGAI International Conference on ""Advances in Print and Media Technology"" (Iarigai)", 2021
Editor: Iarigai
DOI: 10.14622/advances_47_2021

Multi-Layer Halftoning for Poly-jet 3D Printing

Autores: Abedini, Fereshteh; Hlayhel, Raed; Gooran, Sasan; Nyström, Daniel; Suneel Sole, Aditya
Publicado en: London Imaging Meeting 2023, Edición 3, 2023
Editor: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.08

Real-time Style Transfer for Videos to Enhance the Realism of Simulation of Laparoscopic Surgeries

Autores: Shao, Marine Clark, James Huson, David Hardeberg, Jon Yngve
Publicado en: 10th European Workshop on Visual Information Processing (EUVIP), 2022
Editor: IEEE
DOI: 10.1109/euvip53989.2022.9922706

Image enhancement dataset for evaluation of image quality metrics

Autores: Kadyrova, Altynay; Pedersen, Marius; Ahmad, Bilal; Mandal, Dipendra J.; Nguyen, Mathieu; Zimmerman, Pauline Hardeberg
Publicado en: Proc. IS&T Int’l. Symp. on Electronic Imaging: Image Quality and System Performance, Edición 1, 2022
Editor: Society for Imaging Science and Technology
DOI: 10.2352/EI.2022.34.9.IQSP-317

Influence of the printing direction on the surface appearance in multi-material fused filament fabrication

Autores: Tonello, R., Mollah, M. T., Weiss, K., Spangenberg, J., Strandlie, A., Pedersen, D. B., and Frisvad, J. R.
Publicado en: Proceedings of CAD/Graphics 2023. Lecture Notes in Computer Science, 2023
Editor: Springer

BRDF rendering by interpolation of optimised model parameters

Autores: Tanzima Habib, Phil Green, Peter Nussbaum
Publicado en: Color and Imaging Conference, Edición 2020/28, 2020, Página(s) 162-168, ISSN 2166-9635
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.25

Recreating the Relief of the Temple of the Jaguars: Exploring Digital and Analogue 2.5D Printing of Mesoamerican Imagery

Autores: Trujillo Vazquez, Abigail; Aure, Xavier; Klein, Susanne; Parraman, Carinna
Publicado en: Printing for Fabrication 2021 (Print4Fab 2021), 2021
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-4451.2021.37.41

Angular dependent reflectance spectroscopy of RGBW pigments

Autores: Pranovich, Alina; Trujillo Vazquez, Abigail; Nyström, Daniel; Valyukh, Sergiy; Frisvad, Jeppe Revall; Klein, Susanne; Parraman, Carinna
Publicado en: DIVA, Edición 1, 2022
Editor: Advances in Printing and Media Technology
DOI: 10.14622/Advances_48_2022_13

The Effect of Halftoning on the Appearance of 3D Printed Surfaces

Autores: Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Publicado en: Iarigai, 2022
Editor: IARIGAI
DOI: 10.5281/zenodo.7014365

Additive manufacturing of multilayered polymer composites: Durability assessment

Autores: Payami Golhin, Ali; Srivastava, Chaman; Tingstad, Jens Fossan; Sole, Aditya Suneel; Strandlie, Are; Grammatikos, Sotirios
Publicado en: Edición 1, 2022
Editor: the European Conference on Composite Materials

The Influence of Wedge Angle, Feedstock Color, and Infill Density on the Color Difference of FDM Objects

Autores: Payami Golhin, Ali; Strandlie, Are; Green, Phil
Publicado en: Twenty-ninth Color and Imaging Conference (CIC29), 2021
Editor: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.5.050408

Investigation on color characterization methods for 3D printer

Autores: He, Ruili; Xiao, Kaida; Pointer, Michael
Publicado en: London Imaging Meeting, Edición 1, 2023
Editor: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.18

Influence of procedural noise on the glossiness of 2.5D printed patches

Autores: Trujillo Vazquez, Abigail; Saric, Donatela; Klein, Susanne; Parraman, Carinna
Publicado en: The 29th Color and Imaging Conference (CIC29), 2021
Editor: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.105

A novel camera colour characterisation model for the colour measurement of human skin

Autores: Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Publicado en: Electronic Imaging, 2020, ISSN 2470-1173
Editor: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2470-1173.2021.16.COLOR-222

Displaced signed distance fields for additive manufacturing

Autores: Alan Brunton, Lubna Abu Rmaileh
Publicado en: ACM Transactions on Graphics, 2021
Editor: Association for Computing Machinery
DOI: 10.1145/3450626.3459827

A mathematical model for gloss prediction of 2D prints

Autores: Saric, Donatela; Kraushaar, Andreas; Suneel Sole, Aditya
Publicado en: London Imaging Meeting, Edición 1, 2023
Editor: Society for Imaging Science and Technology,
DOI: 10.2352/lim.2023.4.1.13

Effect of Halftones on Printing Iridescent Colors

Autores: Abedini, Fereshteh; Trujillo Vazquez, Abigail; Gooran, Sasan; Klein, Susanne
Publicado en: Electronic Imaging, Edición 1, 2023
Editor: Society for Imaging Science and Technology
DOI: 10.2352/EI.2023.35.15.COLOR-206

Simulation of laparoscopic ultrasound imaging and suturing of the bile duct using silicone

Autores: M. Shao, D. Huson, J. Clark
Publicado en: Proc. SPIE 12034, Medical Imaging 2022: Image-Guided Procedures, Robotic Interventions, and Modeling, 2022
Editor: SPIE
DOI: 10.1117/12.2611340

Evaluation of surface roughness and periodical layers in material jetting

Autores: Ali Payami Golhin; Aditya Suneel Sole; Are Strandlie
Publicado en: Euspen's 23rd International Conference & Exhibition (ICE23) , Copenhagen, Denmark, 12-16 June 2023, Edición 1, 2023
Editor: Zenodo
DOI: 10.5281/zenodo.8351945

Effects of accelerated aging on the appearance and mechanical performance of materials jetting products

Autores: Ali Payami Golhin; Chaman Srivastava; Are Strandlie; Aditya Suneel Sole; Sotirios Grammatikos
Publicado en: 228, Edición 1, 2023, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2023.111863

Investigating the optical translucency of Spectralon using BSSRDF measurements

Autores: Lou Gevaux; Dipanjana Saha; Gaël Obein
Publicado en: Crossref, Edición 1, 2023, ISSN 2155-3165
Editor: Optica Publishing Group
DOI: 10.1364/ao.491929

Effect of various ink types on naturalness perception of 2.5 D prints

Autores: Kadyrova, Altynay Pedersen, Marius Westland, Stephen Weijkamp, Clemens
Publicado en: Journal of Print and Media Technology Research, 2022, ISSN 2223-8905
Editor: Iarigai
DOI: 10.14622/jpmtr-2215

The Amber Project: A Survey of Methods and Inks for the Reproduction of the Color of Translucent Objects

Autores: Trujillo-Vazquez , Abigail; Fuller, Harrie; Klein, Susanne; Parraman, Carinna
Publicado en: Applied Sciences, Edición 12, 2022, Página(s) 793, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app12020793

Printing with tonalli: Reproducing Featherwork from Precolonial Mexico Using Structural Colorants

Autores: Trujillo Vazquez, Abigail; Abedini, Fereshteh; Pranovich, Alina; Parraman, Carinna; Klein, Susanne
Publicado en: Colorants, Edición 4, 2023, ISSN 2079-6447
Editor: MDPI
DOI: 10.3390/colorants2040033

Spectral Reconstruction Using an Iteratively Reweighted Regulated Model from Two Illumination Camera Responses

Autores: Liu, Zhen; Xiao, Kaida; Pointer, Michael R.; He, Ruili; Xie, Xuejun
Publicado en: Sensors, Edición 14248220, 2021, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21237911

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

Autores: Riccardo Tonello; Knut Conradsen; David Bue Pedersen; Jeppe Revall Frisvad
Publicado en: Polymers; Volume 15; Edición 13; Pages: 2967, Edición 1, 2023, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym15132967

Optical properties of tilted surfaces in material jetting

Autores: Payami Golhin, Ali Strandlie, Are
Publicado en: Optics & Laser Technology, 2023, ISSN 1879-2545
Editor: Elsevier
DOI: 10.1016/j.optlastec.2023.109992

Optimizing Parametric Factors in CIELAB and CIEDE2000 Color-Difference Formulas for 3D-Printed Spherical Objects

Autores: Ruili He; Kaida Xiao; Michael Pointer; Manuel Melgosa; Yoav Bressler
Publicado en: Materials, Edición 19961944, 2022, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15124055

Surface roughness of as-printed polymers: a comprehensive review

Autores: Ali Payami Golhin; Riccardo Tonello; Jeppe Revall Frisvad; Sotirios Grammatikos; Are Strandlie
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 1, 2023, ISSN 1433-3015
Editor: Springer
DOI: 10.1007/s00170-023-11566-z

Three-Dimensional Adaptive Digital Halftoning

Autores: Gooran, Sasan; Abedini, Fereshteh
Publicado en: Journal of Imaging Science and Technology, Edición 1, 2022, ISSN 1062-3701
Editor: Society for Imaging Science and Technology
DOI: 10.2352/J.ImagingSci.Technol.2022.66.6.060403

Effect of Elevation and Surface Roughness on Naturalness Perception of 2.5D Decor Prints

Autores: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Publicado en: Materials, Edición 1, 2022, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15093372

Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning

Autores: Lezhong Wang; Siavash Arjomand Bigdeli; Anders Nymark Christensen; Milena Corredig; Riccardo Tonello; Anders Bjorholm Dahl; Jeppe Revall Frisvad
Publicado en: Wang , L , Arjomand Bigdeli , S , Nymark Christensen , A , Corredig , M , Tonello , R , Dahl , A B & Frisvad , J R 2023 , ' Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning ' , Optical Materials Express , vol. 13 , no. 5 , 5 , pp. 1457-1474 . https://doi.org/10.1364/OME.486542, Edición 1, 2023, ISSN 2155-3165
Editor: Optica Publishing Group
DOI: 10.1364/ome.486542

Development and validation of a hybrid simulator for ultrasound-guided laparoscopic common bile duct exploration

Autores: Marine Y. Shao; Mohamed Aburrous; David Huson; Carinna Parraman; Jon Y. Hardeberg; James Clark
Publicado en: Surgical endooscopy, Edición 1, 2023, ISSN 1432-2218
Editor: Springer
DOI: 10.1007/s00464-023-10168-w

Development of an image-based measurement system for human facial skin colour

Autores: Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Publicado en: Color Research and Application, Edición 03612317, 2022, Página(s) 288-300, ISSN 0361-2317
Editor: John Wiley & Sons Inc.
DOI: 10.1002/col.22737

Dot Off Dot Screen Printing with RGBW Reflective Inks

Autores: Pranovich, Alina; Valyukh, Sergiy; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Publicado en: Journal of Imaging Science and Technology, Edición 2, 2023, ISSN 1943-3522
Editor: Society for Imagaing Sciecne and Technology
DOI: 10.2352/j.imagingsci.technol.2023.67.3.030404

Visually Significant Dimensions and Parameters for Gloss

Autores: Šaric, Donatela; Suneel Sole, Aditya
Publicado en: Jouranal of imaging, Edición 1, 2023, ISSN 2313-433X
Editor: MDPI
DOI: 10.3390/jimaging10010010

Color appearance in rotational material jetting

Autores: Are Strandlie; Aditya Sole; Ali Payami Golhin
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 1, 2022, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.21203/rs.3.rs-1754999/v1

Structure aware halftoning using the iterative method controlling the dot placement

Autores: Abedini, Fereshteh; Gooran, Sasan; Kitanovski, Vlado; Nyström, Daniel
Publicado en: Journal of Imaging Science and Technology, Edición 10623701, 2021, ISSN 1062-3701
Editor: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.6.060404

Towards a Low-Cost Monitor-Based Augmented Reality Training Platform for At-Home Ultrasound Skill Development

Autores: Marine Y. Shao; Tamara Vagg; Matthias Seibold; Mitchell Doughty
Publicado en: Journal of Imaging; Volume 8; Edición 11; Pages: 305, Edición 1, 2022, ISSN 2313-433X
Editor: MDPI
DOI: 10.3390/jimaging8110305

What Elevation Makes 2.5D Prints Perceptually Natural?

Autores: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Publicado en: Materials, Edición 19961944, 2022, Página(s) 3573, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15103573

Appearance evaluation of digital materials in material jetting

Autores: Payami Golhin, A., A. Strandlie
Publicado en: Optics and lasers in engineering, 2023, ISSN 1873-0302
Editor: Elsevier
DOI: 10.1016/j.optlaseng.2023.107632

Quality Assessment of 2.5D Prints Using 2D Image Quality Metrics

Autores: Kadyrova, Altynay; Kitanovski, Vlado; Pedersen, Marius
Publicado en: Applied Sciences, Edición 20763417, 2021, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app11167470

Meso-Facets for Goniochromatic 3D Printing

Autores: Abu Rmaileh, Lubna Brunton, Alan
Publicado en: ACM Journals, 2023, ISSN 0004-5411
Editor: Association for Computing Machinary, Inc.
DOI: 10.1145/3592137

BRDF representation in response to the build orientation in 3D-printed digital materials

Autores: Payami Golhin, Ali; Sole, Aditya; Strandlie, Are
Publicado en: Journal of Manufacturing Processes, Edición 1, 2023, ISSN 1526-6125
Editor: Elsevier BV
DOI: 10.1016/j.jmapro.2023.09.016

Structure-Aware Color Halftoning with Adaptive Sharpness Control

Autores: Abedini, Fereshteh; Gooran, Sasan
Publicado en: Journal of Imaging Science and Technology, Edición 1, 2022, ISSN 1943-3522
Editor: Society for Imaging science and technology
DOI: 10.2352/j.imagingsci.technol.2022.66.6.060404

Quality Assessment of 2.5D Prints

Autores: Kadyrova, Altynay
Publicado en: Edición 1, 2023
Editor: NTNU Open

Buscando datos de OpenAIRE...

Appearance Printing - European Advanced Research School

Resultado final

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página