Appearance Printing - European Advanced Research School | ApPEARS | Progetto | Risultati | H2020 | CORDIS

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Measurement of the BRDF over the visible spectral range at a submillimeter scale

For some materials such as fabric, wood or leathers, the distance of observation greatly influences its appearance. Knowing the optical properties at a micrometric scale of these materials is important to understand and reproduce the appearance of the full object. However, there is no existing goniospectrophotometer that can perform BRDF measurement at a submillimetric scale. In fact, decreasing the spatial resolution of BRDF measurements brings forward specific metrological issues that have so far not been addressed. During the project, we will build a set-up allowing to investigate BRDF at a micrometric scale and to establish a multi-scale traceability between small measurement areas and classic measurement areas.

System (model, algorithms, software) for modelling identified parameters

An appearance modeling system for design and print of novel 3D surface microstructures based on manipulation of print and post-processing parameters.

Image quality metric for material reproduction

A mathematical model to measure difference in image quality for material reprodcution

Colour model for 2.5D printing (including forward and inverse models)

A colour prediction model for appearance printing, predicting the spectral outcome of the print, customized for the special inks and colour mixing technique employed.

Methods and strategies for gonio-chromatic gamut mapping

A report/publication discussing methods and strategies for gonio-chromatic gamut mapping

Algorithms for resin selection and generative design to meet applications demands

A report/publication that will discuss about extending existing 3D printing appearance reproduction technologies by a resin selection algorithm and by generative design algorithms to meet application demands.

Perceptual model for material appearance

A mathematical model for predicting perceptual material appearance

Two production demonstrators that describe the use of the system (5.6) to meet requirements associated with industrial or artistic use cases.

Based on our existing collaborations with industrial partners, we will identify two industrially relevant use cases. The system developed in deliverable 5.6 will then be applied to develop demonstrators.

Extended model for appearance printing, including angular variation

An extended colour prediction model, that also considers the angle dependency and varying gloss level, caused by the surface height variation in 2.5D and 3D printing.

Practical demonstration of materials and inks development, leading to patents, technical reports

A technical report (or patent if possible) about inks and material development within Appearance printing

Description of new attributes for visual appearance

Proposal for new visual appearance attributes

Novel methods for structure based halftoning

A structure-based halftoning model, that adaptively changes the halftone shape and dot size depending on the image content and structure, to better mimic the appearance of surfaces and materials.

Generation of micro- and nano-textured surfaces

A report/publication discussing micro-nano textured surfaces and methods for generation

Report on multiscale traceability of BRDF measurement

To establish a multi-scale traceability between small measurement areas and classic measurement areas we have developed a new goniospectrophotometer which can measure the BRDF in micron scale. As we have described in our previous deliverable that the knowledge about optical properties at a micrometric scale of materials is important to understand and reproduce the appearance of the full object. So, to prove the difference of measurement in micron scale we will perform a comparative study by measuring BRDF with illumination beam of different scale like: 100micron,1mm and 1cm. And to validate our measurement we will develop new model of our customized sample. In further this procedure can be applied to natural (wood, leather, fabric etc.) and 3D printed materials.

Implementation framework for 2.5D colour reproduction, in the form of an open-source code repository, that can be used to develop other applications in 2.5D reproduction

An open source code repository for development of applications in 2.5D reproductions

Extended halftoning model for 2.5D appearance printing

An extended halftoning model, determining also the optimal 3D dot placement, to control both colour properties and surface height variation.

Database of vector based brush strokes and sample prints that demonstrate the range of printed materials

Creating a database of vector based brush strokes and sample prints to demonstrate the range of printed materials

New model establishing correlation between surface parameters and optical parameters

A mathematical model correlating surface parameters and optical parameters for printed appearance matching

Identification and development of case studies of different users, markets, and applications.

A case study report on different users, markets and application within the field of Appearance printing

Channel mixing models that predict 2.5D appearance attributes from input channels; and their inverse, which predict output channels to match specified appearance attributes

Mathematical model to predict 2.5D appearance attributes from input channels.

Working prototype software for accurate 3D visualization of textured surfaces

Prototype software code for accurate 3D visualisation of textured surfaces

Common work environment for different printers and materials

A report/publication on common working space for printers and materials in 2.5D and 3D printing techniques

Individual PhD thesis / Doctoral degrees awarded

Successful submission of the PhD thesis

Transferable skills courses

Successfully completion of the transferable skills courses planned within the project by the ESRs

ApPEARS vacancies advertised

A report on the vacancy advertisement.

International Symposium and Final Conference

Dissemination of results and findings at international conference and symposiums

Scientific courses

Successfully completion of the scientific courses planned within the project by the ESRs

Public dissemination of project results (after protection), including peer reviewed publications

Report on the strategy to be followed for public dessemination of project results (after protection), including peer reviewed publications.

Scientific report on guidelines for subjective and objective evaluation of relief

A report on subjective and objective evaluation of material appearance for relief printed material/objects

Evaluation of pros and cons of state-of-the-art solutions, tests and user cases

A report presenting the state of the art solutions, tests and user cases for appearance printing using 2.5D print techniques

Project website

Project website for dissemination of project results and communication.

Pubblicazioni

Advancing Material Appearance Measurement: A Cost- Effective Multispectral Imaging System for Capturing SVBRDF and BTF

Autori: Ansari-Asl, Majid; Barbieri, Markus; Obein, Gaël; Hardeberg, Jon Yngve
Pubblicato in: London Imaging Meeting, Numero 1, 2023
Editore: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.25

3D Halftoning based on Iterative Method Controlling Dot Placement

Autori: Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Pubblicato in: IS&T Printing for Fabrication 2020, 2021
Editore: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.69

Physical patient simulators for surgical training: a review

Autori: Marine Shao, Carinna Parraman, David Huson
Pubblicato in: London Imaging Meeting, Numero 2020/1, 2020, Pagina/e 124-128, ISSN 2694-118X
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-05

Implementing directional reflectance in a colour managed workflow

Autori: Tanzima Habib, Phil Green, Aditya Sole
Pubblicato in: London Imaging Meeting, Numero 2020/1, 2020, Pagina/e 119-123, ISSN 2694-118X
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-33

Surface Discretisation Effects on 3D Printed Surface Appearance

Autori: Pranovich, Alina; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Pubblicato in: CEUR Workshop Proceedings, Numero vol. 2688, 2020
Editore: CEUR Workshop Proceedings
DOI: 10.5281/zenodo.4081343

Tactile prints in colour: Studying the Visual Appearance of 2.5D Prints for Heritage Recreations

Autori: Trujillo Vazquez, Abigail; Rodriguez Echavarria, Karina; Weyrich, Tim
Pubblicato in: EUROGRAPHIICS Workshop on Graphics and Cultural Heritage, Numero 1, 2023
Editore: Eurographics Digital Library
DOI: 10.2312/gch.20221225

Fast Impression Painting Using Multi-color Fused Deposition Modeling with a Diamond Hotend

Autori: Tonello, Riccardo; Abedini, Fereshteh; Bue Pedersen, David; Revall Frisvad, Jeppe
Pubblicato in: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA, 2022
Editore: 2022 Summer Topical Meeting, Knoxville, Tennessee, USA
DOI: 10.5281/zenodo.7118722

A weighted goodness-of-fit metric for comparison of spectra

Autori: Habib, T., P. Green, P. Nussbaum
Pubblicato in: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Editore: International Colour Association

An Investigation on Visual Colour Difference of 3D Printed Objects

Autori: He, R., K. Xiao., M. Pointer, M. Melgosa, Y. Bressler
Pubblicato in: Proceedings of the International Colour Association (AIC) Conference 2022, 2022
Editore: the International Colour Association (AIC)

Assessing skin tone heterogeneity under various light sources

Autori: Ruili He, Kaida Xiao, Michael Pointer, Stephen Westland
Pubblicato in: London Imaging Meeting, Numero 2020/1, 2020, Pagina/e 5-9, ISSN 2694-118X
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2694-118x.2020.lim-15

Camera Response Function Assessment in Multispectral HDR Imaging

Autori: Ansari-Asl, Majid Thomas, Jean-Baptiste Hardeberg, Jon Yngve
Pubblicato in: Electronic Imaging 2022, 2022
Editore: Society for Imaging Science and Technology
DOI: 10.2352/ei.2022.34.15.color-141

Benchmarking modern gloss correlators with established ISO 2813 standard and visual judgment of gloss

Autori: Donatela Šarić, Andreas Kraushaar, Marco Mattuschka, Phil Green
Pubblicato in: Color and Imaging Conference, 2021
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.306

Estimation of BRDF Measurements for Printed Colour Samples

Autori: Habib, Tanzima; Phil Green; Peter Nussbaum
Pubblicato in: the 29th Color and Imaging Conference (CIC29), 2021
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.123

Spectral reproduction: drivers, use cases and workflow

Autori: Tanzima Habib, Phil Green, Peter Nussbaum
Pubblicato in: Electronic Imaging, Numero 2020/15, 2020, Pagina/e 121-1-121-6, ISSN 2470-1173
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2470-1173.2020.15.color-121

Naturalness perception of 2.5D prints: elevation and size of prints relation

Autori: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen; Weijkamp, Clemens; Horiuchi, Takahiko
Pubblicato in: London Imaging Meeting, Numero 5, 2023
Editore: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.05

The reconstruction of the appearance of the Acancéh frieze by 2.5D printing

Autori: Klein, Susanne; Trujillo Vazquez, Abigail; Aure Calvet, Xavi; Parraman, Carinna
Pubblicato in: IS&T Printing for Fabrication 2020, 2021
Editore: The Society for Imaging Science and Technology
DOI: 10.5281/zenodo.4727289

A study on attributes for 2.5D print quality assessment

Autori: Altynay Kadyrova, Vlado Kitanovski, Marius Pedersen
Pubblicato in: Color and Imaging Conference, Numero 2020/28, 2020, Pagina/e 19-24, ISSN 2166-9635
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.4

3D Surface Structures and 3D Halftoning

Autori: Gooran, Sasan; Abedini, Fereshteh
Pubblicato in: Is&T Printing for Fabrication 2020, 2021
Editore: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2169-4451.2020.36.75

Retrieving the ancient colours: artistic practice as a tool for heritage reconstruction

Autori: Abigail Trujillo Vazquez, Susanne Klein, Xavi Aure Calvet, Carinna Parraman
Pubblicato in: Color and Imaging Conference, Numero 2020/28, 2020, Pagina/e 282-287, ISSN 2166-9635
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.45

Development of a µBRDF goniospectrophotometer for BRDF measurement on tiny surfaces

Autori: Saha, Dipanjana Gevaux, L. Cances, T. Richard, A. Obein, Gaël
Pubblicato in: CIE 2021 Midterm Conference, CIE, 2022
Editore: HAL Open Science
DOI: 10.25039/x48.2021.op42

Optical properties and appearance of fused deposition modelling filaments

Autori: Pranovich, Alina Gooran, Sasan Frisvad, Jeppe Revall Nyström, Daniel
Pubblicato in: "47th IARIGAI International Conference on ""Advances in Print and Media Technology"" (Iarigai)", 2021
Editore: Iarigai
DOI: 10.14622/advances_47_2021

Multi-Layer Halftoning for Poly-jet 3D Printing

Autori: Abedini, Fereshteh; Hlayhel, Raed; Gooran, Sasan; Nyström, Daniel; Suneel Sole, Aditya
Pubblicato in: London Imaging Meeting 2023, Numero 3, 2023
Editore: Society of Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.08

Real-time Style Transfer for Videos to Enhance the Realism of Simulation of Laparoscopic Surgeries

Autori: Shao, Marine Clark, James Huson, David Hardeberg, Jon Yngve
Pubblicato in: 10th European Workshop on Visual Information Processing (EUVIP), 2022
Editore: IEEE
DOI: 10.1109/euvip53989.2022.9922706

Image enhancement dataset for evaluation of image quality metrics

Autori: Kadyrova, Altynay; Pedersen, Marius; Ahmad, Bilal; Mandal, Dipendra J.; Nguyen, Mathieu; Zimmerman, Pauline Hardeberg
Pubblicato in: Proc. IS&T Int’l. Symp. on Electronic Imaging: Image Quality and System Performance, Numero 1, 2022
Editore: Society for Imaging Science and Technology
DOI: 10.2352/EI.2022.34.9.IQSP-317

Influence of the printing direction on the surface appearance in multi-material fused filament fabrication

Autori: Tonello, R., Mollah, M. T., Weiss, K., Spangenberg, J., Strandlie, A., Pedersen, D. B., and Frisvad, J. R.
Pubblicato in: Proceedings of CAD/Graphics 2023. Lecture Notes in Computer Science, 2023
Editore: Springer

BRDF rendering by interpolation of optimised model parameters

Autori: Tanzima Habib, Phil Green, Peter Nussbaum
Pubblicato in: Color and Imaging Conference, Numero 2020/28, 2020, Pagina/e 162-168, ISSN 2166-9635
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2020.28.25

Recreating the Relief of the Temple of the Jaguars: Exploring Digital and Analogue 2.5D Printing of Mesoamerican Imagery

Autori: Trujillo Vazquez, Abigail; Aure, Xavier; Klein, Susanne; Parraman, Carinna
Pubblicato in: Printing for Fabrication 2021 (Print4Fab 2021), 2021
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-4451.2021.37.41

Angular dependent reflectance spectroscopy of RGBW pigments

Autori: Pranovich, Alina; Trujillo Vazquez, Abigail; Nyström, Daniel; Valyukh, Sergiy; Frisvad, Jeppe Revall; Klein, Susanne; Parraman, Carinna
Pubblicato in: Numero 1, 2022
Editore: Advances in Printing and Media Technology
DOI: 10.14622/Advances_48_2022_13

The Effect of Halftoning on the Appearance of 3D Printed Surfaces

Autori: Abedini, Fereshteh; Gooran, Sasan; Nyström, Daniel
Pubblicato in: Iarigai, 2022
Editore: IARIGAI
DOI: 10.5281/zenodo.7014365

Additive manufacturing of multilayered polymer composites: Durability assessment

Autori: Payami Golhin, Ali; Srivastava, Chaman; Tingstad, Jens Fossan; Sole, Aditya Suneel; Strandlie, Are; Grammatikos, Sotirios
Pubblicato in: Numero 1, 2022
Editore: the European Conference on Composite Materials

The Influence of Wedge Angle, Feedstock Color, and Infill Density on the Color Difference of FDM Objects

Autori: Payami Golhin, Ali; Strandlie, Are; Green, Phil
Pubblicato in: Twenty-ninth Color and Imaging Conference (CIC29), 2021
Editore: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.5.050408

Investigation on color characterization methods for 3D printer

Autori: He, Ruili; Xiao, Kaida; Pointer, Michael
Pubblicato in: London Imaging Meeting, Numero 1, 2023
Editore: Society for Imaging Science and Technology
DOI: 10.2352/lim.2023.4.1.18

Influence of procedural noise on the glossiness of 2.5D printed patches

Autori: Trujillo Vazquez, Abigail; Saric, Donatela; Klein, Susanne; Parraman, Carinna
Pubblicato in: The 29th Color and Imaging Conference (CIC29), 2021
Editore: Society for Imaging Science and Technology
DOI: 10.2352/issn.2169-2629.2021.29.105

A novel camera colour characterisation model for the colour measurement of human skin

Autori: Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Pubblicato in: Electronic Imaging, 2020, ISSN 2470-1173
Editore: The Society for Imaging Science and Technology
DOI: 10.2352/ISSN.2470-1173.2021.16.COLOR-222

Displaced signed distance fields for additive manufacturing

Autori: Alan Brunton, Lubna Abu Rmaileh
Pubblicato in: ACM Transactions on Graphics, 2021
Editore: Association for Computing Machinery
DOI: 10.1145/3450626.3459827

A mathematical model for gloss prediction of 2D prints

Autori: Saric, Donatela; Kraushaar, Andreas; Suneel Sole, Aditya
Pubblicato in: London Imaging Meeting, Numero 1, 2023
Editore: Society for Imaging Science and Technology,
DOI: 10.2352/lim.2023.4.1.13

Effect of Halftones on Printing Iridescent Colors

Autori: Abedini, Fereshteh; Trujillo Vazquez, Abigail; Gooran, Sasan; Klein, Susanne
Pubblicato in: Electronic Imaging, Numero 1, 2023
Editore: Society for Imaging Science and Technology
DOI: 10.2352/EI.2023.35.15.COLOR-206

Simulation of laparoscopic ultrasound imaging and suturing of the bile duct using silicone

Autori: M. Shao, D. Huson, J. Clark
Pubblicato in: Proc. SPIE 12034, Medical Imaging 2022: Image-Guided Procedures, Robotic Interventions, and Modeling, 2022
Editore: SPIE
DOI: 10.1117/12.2611340

Evaluation of surface roughness and periodical layers in material jetting

Autori: Ali Payami Golhin; Aditya Suneel Sole; Are Strandlie
Pubblicato in: Euspen's 23rd International Conference & Exhibition (ICE23) , Copenhagen, Denmark, 12-16 June 2023, Numero 1, 2023
Editore: Zenodo
DOI: 10.5281/zenodo.8351945

Effects of accelerated aging on the appearance and mechanical performance of materials jetting products

Autori: Ali Payami Golhin; Chaman Srivastava; Are Strandlie; Aditya Suneel Sole; Sotirios Grammatikos
Pubblicato in: 228, Numero 1, 2023, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2023.111863

Investigating the optical translucency of Spectralon using BSSRDF measurements

Autori: Lou Gevaux; Dipanjana Saha; Gaël Obein
Pubblicato in: Crossref, Numero 1, 2023, ISSN 2155-3165
Editore: Optica Publishing Group
DOI: 10.1364/ao.491929

Effect of various ink types on naturalness perception of 2.5 D prints

Autori: Kadyrova, Altynay Pedersen, Marius Westland, Stephen Weijkamp, Clemens
Pubblicato in: Journal of Print and Media Technology Research, 2022, ISSN 2223-8905
Editore: Iarigai
DOI: 10.14622/jpmtr-2215

The Amber Project: A Survey of Methods and Inks for the Reproduction of the Color of Translucent Objects

Autori: Trujillo-Vazquez , Abigail; Fuller, Harrie; Klein, Susanne; Parraman, Carinna
Pubblicato in: Applied Sciences, Numero 12, 2022, Pagina/e 793, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app12020793

Printing with tonalli: Reproducing Featherwork from Precolonial Mexico Using Structural Colorants

Autori: Trujillo Vazquez, Abigail; Abedini, Fereshteh; Pranovich, Alina; Parraman, Carinna; Klein, Susanne
Pubblicato in: Colorants, Numero 4, 2023, ISSN 2079-6447
Editore: MDPI
DOI: 10.3390/colorants2040033

Spectral Reconstruction Using an Iteratively Reweighted Regulated Model from Two Illumination Camera Responses

Autori: Liu, Zhen; Xiao, Kaida; Pointer, Michael R.; He, Ruili; Xie, Xuejun
Pubblicato in: Sensors, Numero 14248220, 2021, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21237911

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

Autori: Riccardo Tonello; Knut Conradsen; David Bue Pedersen; Jeppe Revall Frisvad
Pubblicato in: Polymers; Volume 15; Numero 13; Pages: 2967, Numero 1, 2023, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym15132967

Optical properties of tilted surfaces in material jetting

Autori: Payami Golhin, Ali Strandlie, Are
Pubblicato in: Optics & Laser Technology, 2023, ISSN 1879-2545
Editore: Elsevier
DOI: 10.1016/j.optlastec.2023.109992

Optimizing Parametric Factors in CIELAB and CIEDE2000 Color-Difference Formulas for 3D-Printed Spherical Objects

Autori: Ruili He; Kaida Xiao; Michael Pointer; Manuel Melgosa; Yoav Bressler
Pubblicato in: Materials, Numero 19961944, 2022, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma15124055

Surface roughness of as-printed polymers: a comprehensive review

Autori: Ali Payami Golhin; Riccardo Tonello; Jeppe Revall Frisvad; Sotirios Grammatikos; Are Strandlie
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 1, 2023, ISSN 1433-3015
Editore: Springer
DOI: 10.1007/s00170-023-11566-z

Three-Dimensional Adaptive Digital Halftoning

Autori: Gooran, Sasan; Abedini, Fereshteh
Pubblicato in: Journal of Imaging Science and Technology, Numero 1, 2022, ISSN 1062-3701
Editore: Society for Imaging Science and Technology
DOI: 10.2352/J.ImagingSci.Technol.2022.66.6.060403

Effect of Elevation and Surface Roughness on Naturalness Perception of 2.5D Decor Prints

Autori: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Pubblicato in: Materials, Numero 1, 2022, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma15093372

Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning

Autori: Lezhong Wang; Siavash Arjomand Bigdeli; Anders Nymark Christensen; Milena Corredig; Riccardo Tonello; Anders Bjorholm Dahl; Jeppe Revall Frisvad
Pubblicato in: Wang , L , Arjomand Bigdeli , S , Nymark Christensen , A , Corredig , M , Tonello , R , Dahl , A B & Frisvad , J R 2023 , ' Noninvasive material anisotropy estimation using oblique incidence reflectometry and machine learning ' , Optical Materials Express , vol. 13 , no. 5 , 5 , pp. 1457-1474 . https://doi.org/10.1364/OME.486542, Numero 1, 2023, ISSN 2155-3165
Editore: Optica Publishing Group
DOI: 10.1364/ome.486542

Development and validation of a hybrid simulator for ultrasound-guided laparoscopic common bile duct exploration

Autori: Marine Y. Shao; Mohamed Aburrous; David Huson; Carinna Parraman; Jon Y. Hardeberg; James Clark
Pubblicato in: Surgical endooscopy, Numero 1, 2023, ISSN 1432-2218
Editore: Springer
DOI: 10.1007/s00464-023-10168-w

Development of an image-based measurement system for human facial skin colour

Autori: Ruili He, Kaida Xiao, Michael Pointer, Yoav Bressler, Zhen Liu, Yan Lu
Pubblicato in: Color Research and Application, Numero 03612317, 2022, Pagina/e 288-300, ISSN 0361-2317
Editore: John Wiley & Sons Inc.
DOI: 10.1002/col.22737

Dot Off Dot Screen Printing with RGBW Reflective Inks

Autori: Pranovich, Alina; Valyukh, Sergiy; Gooran, Sasan; Frisvad, Jeppe Revall; Nyström, Daniel
Pubblicato in: Journal of Imaging Science and Technology, Numero 2, 2023, ISSN 1943-3522
Editore: Society for Imagaing Sciecne and Technology
DOI: 10.2352/j.imagingsci.technol.2023.67.3.030404

Visually Significant Dimensions and Parameters for Gloss

Autori: Šaric, Donatela; Suneel Sole, Aditya
Pubblicato in: Jouranal of imaging, Numero 1, 2023, ISSN 2313-433X
Editore: MDPI
DOI: 10.3390/jimaging10010010

Color appearance in rotational material jetting

Autori: Are Strandlie; Aditya Sole; Ali Payami Golhin
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 1, 2022, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.21203/rs.3.rs-1754999/v1

Structure aware halftoning using the iterative method controlling the dot placement

Autori: Abedini, Fereshteh; Gooran, Sasan; Kitanovski, Vlado; Nyström, Daniel
Pubblicato in: Journal of Imaging Science and Technology, Numero Volume 65, 2021, ISSN 1062-3701
Editore: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2021.65.6.060404

Towards a Low-Cost Monitor-Based Augmented Reality Training Platform for At-Home Ultrasound Skill Development

Autori: Marine Y. Shao; Tamara Vagg; Matthias Seibold; Mitchell Doughty
Pubblicato in: Journal of Imaging; Volume 8; Numero 11; Pages: 305, Numero 1, 2022, ISSN 2313-433X
Editore: MDPI
DOI: 10.3390/jimaging8110305

What Elevation Makes 2.5D Prints Perceptually Natural?

Autori: Kadyrova, Altynay; Pedersen, Marius; Westland, Stephen
Pubblicato in: Materials, Numero 19961944, 2022, Pagina/e 3573, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma15103573

Appearance evaluation of digital materials in material jetting

Autori: Payami Golhin, A., A. Strandlie
Pubblicato in: Optics and lasers in engineering, 2023, ISSN 1873-0302
Editore: Elsevier
DOI: 10.1016/j.optlaseng.2023.107632

Quality Assessment of 2.5D Prints Using 2D Image Quality Metrics

Autori: Kadyrova, Altynay; Kitanovski, Vlado; Pedersen, Marius
Pubblicato in: Applied Sciences, Numero 20763417, 2021, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app11167470

Meso-Facets for Goniochromatic 3D Printing

Autori: Abu Rmaileh, Lubna Brunton, Alan
Pubblicato in: ACM Journals, 2023, ISSN 0004-5411
Editore: Association for Computing Machinary, Inc.
DOI: 10.1145/3592137

BRDF representation in response to the build orientation in 3D-printed digital materials

Autori: Payami Golhin, Ali; Sole, Aditya; Strandlie, Are
Pubblicato in: Journal of Manufacturing Processes, Numero 1, 2023, ISSN 1526-6125
Editore: Elsevier BV
DOI: 10.1016/j.jmapro.2023.09.016

Structure-Aware Color Halftoning with Adaptive Sharpness Control

Autori: Abedini, Fereshteh; Gooran, Sasan
Pubblicato in: Journal of Imaging Science and Technology, Numero 1, 2022, ISSN 1943-3522
Editore: Society for Imaging science and technology
DOI: 10.2352/j.imagingsci.technol.2022.66.6.060404

Quality Assessment of 2.5D Prints

Autori: Kadyrova, Altynay
Pubblicato in: Numero 1, 2023
Editore: NTNU Open

È in corso la ricerca di dati su OpenAIRE...

Appearance Printing - European Advanced Research School

Risultati finali

Pubblicazioni

Condividi questa pagina Condividi questa pagina sui social network

Scarica Scarica il contenuto della pagina