A breakthrough laser technology for all types of glass processing (ordinary, laminated, tempered, smart, low-energy and other)

Projektinformationen

GLAZER

ID Finanzhilfevereinbarung: 827331

DOI

10.3030/827331

Projekt abgeschlossen

EK-Unterschriftsdatum 1 August 2018

Startdatum 1 September 2018

Enddatum 28 Februar 2019

Finanziert unter

• INDUSTRIAL LEADERSHIP - Innovation In SMEs

Gesamtkosten

€ 71 429,00

EU-Beitrag

€ 50 000,00

Koordiniert durch

HYPERMEMO OY
Finland

Periodic Reporting for period 1 - GLAZER (A breakthrough laser technology for all types of glass processing (ordinary, laminated, tempered, smart, low-energy and other))

Berichtszeitraum: 2018-09-01 bis 2019-02-28

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Hypermemo Oy in Finland has studied the feasibility of commercial launch of its GLAZER next-generation laser technology for glass post-processing. GLAZER is an industrial hardware/software solution, based on a one-of-a-kind CO2 nanosecond-pulsed laser, developed and manufactured by Hypermemo. This solution commercializes the team’s 30+ years experience in laser technology and its proprietary IP. The study took place between September 1, 2018, and February 28, 2019.

90% of glass in the world is now cut with centuries-old methods – mechanical scribing, breaking and grinding. To obtain the best quality, these processes require many pieces of different equipment, generate a lot of waste, and use a lot of consumables. The GLAZER project addresses this problem by dramatically reducing waste, the costs and ecological impact in glass products manufacturing. Also, GLAZER can support the broad market takeoff of environment-friendly thermally insulated windows.

The project’s objectives are to make glass processing 30 times faster, 3 times cheaper, to bring down the whole glass products manufacturing to the only one machine, and to make it commercially available globally.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

To the moment, the technology was tested with GLAZER prototype hardware, using different types of glass, and has proven its expected capabilities. Hypermemo has developed and successfully tested new processes for cutting ordinary flat, hot, laminated glass, polycarbonate, flat glass chamfering, coating deletion, grooving, engraving, and 3D cutting of curved glass products concerning customers demands.

Also, Hypermemo has been successfully working with various market players to popularize GLAZER and to invoke initial commercial interest. Some valuable customer insights were discovered, including GLAZER applications in automotive, architectural, tableware and consumer electronics segments.

Currently, Hypermemo is conducting a GLAZER trial in a real manufacturing environment.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

GLAZER is advancing the state of the art in the glass industry by streamlining and simplifying its processes. The fully industrial-grade equipment kit is in development, to be introduced to the market in the second half of 2019.

The project is going to make its contribution to reducing industrial ecological impact: directly by cleaning-up industrial processes, and indirectly by fostering wide adoption of ecologically-friendly “smart” windows worldwide. Since glass is now being widely adopted in construction, the impact made by GLAZER will lead to significant benefits, helping develop a sustainable society.

logo03.jpg