Projektbeschreibung
Neue Reinigungskabine für Hydraulik-, Automobil- und Luftfahrtsysteme
Die Lebensdauer eines Hydrauliksystems ist ein Mosaik aus Verschleiß und Ermüdung. Ein Großteil dieses Verschleißes wird durch feste Verunreinigungen wie Schmutz verursacht. Im Rahmen des EU-finanzierten Projekts CLEAN CABINET wird eine Lösung erarbeitet, die ein System zur Absaugung von Verunreinigungen, einen Trockenofen sowie ein Mikroskop umfasst. Anstatt jedoch alle drei in einem Reinraumlabor zu installieren (was aufwändig und kostspielig ist), sollen sie in ein einziges, vollautomatisches Gerät integriert werden. Da kein Labor erforderlich ist, wird der Prozess viel schneller und effizienter sein. CLEAN CABINET richtet sich an Industriezweige wie den Maschinenbau, die Automobilindustrie und die Luftfahrtbranche.
Ziel
Most of the wear and fatigue problems suffered by hydraulic systems are caused by solid contaminants, usually generated during the manufacturing process of the components. These particles have a big impact in the reliability and life expectancy of the hydraulic systems, as well as in their efficiency and in their overall energy consumption. The state-of-the-art solutions for cleanliness evaluation need, at least, a contaminant extraction system, a drying oven and a microscope, all of it installed in a clean-room laboratory and operated by skilled technicians. Apart from complex, this is scarcely effective and very costly. OilSafe is an Italian SME funded in 1998. CLEAN CABINET is our disruptive solution for cleanliness testing. It integrates all the previously mentioned processes in a single and fully automated device, from the extraction to the image analysis. Our solution doesn’t need a laboratory, can be readily integrated in manufacturing lines and no skilled operators are needed. It is more efficient and is fully compliant with ISO16232. Moreover, the results are obtained much faster and the tests result, at least, four times cheaper. Its use will have a big impact in the quality of the hydraulic systems because it enables to perform more tests at lower cost. Initially, the target sectors will be machinery (construction, agriculture, etc.) automotive and aeronautic, although applications can be encountered in many sectors. A first prototype is already working with very good results. The goals of the project are to integrate the image analysis module and some additional features in a new prototype before launching it to the market and to develop the commercial network needed to sell it, first in Italy and then in the rest of Europe. The project will last 2 years with an estimated budget of 2,5M€. We expect to sell more than 500 units during the fifth year after the completion of the project, for a ROI of 7.8 and we foresee to create 18 new jobs in OilSafe
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- Technik und TechnologieMaschinenbauProduktionstechnik
- NaturwissenschaftenNaturwissenschaftenOptikMikroskopie
- AgrarwissenschaftenLandwirtschaft, Forstwirtschaft und FischereiLandwirtschaft
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Thema/Themen
Aufforderung zur Vorschlagseinreichung
(öffnet in neuem Fenster) H2020-EIC-SMEInst-2018-2020
Andere Projekte für diesen Aufruf anzeigenUnterauftrag
H2020-SMEInst-2018-2020-2
Finanzierungsplan
SME-2 -Koordinator
41122 MODENA
Italien
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).