Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Real time Optoelectronic Sensors for Electro-Actuator Hydraulic Fluid Contamination Monitoring

Description du projet

Inspecter les liquides hydrauliques des aéronefs pour trouver des traces de dégradation

La détection précoce de contaminants d’hydrocarbures pourrait améliorer la durée de vie des composants hydrauliques des aéronefs. Le projet FluidER, financé par l’UE, développe un nouveau capteur sur conduite qui devrait préserver le bon fonctionnement du vérin électro-hydraulique de l’aéronef en contrôlant régulièrement les liquides. La fusion de capteurs hétérogènes permettra d’identifier différents types de contamination des liquides hydrauliques, dont des modifications dans leurs propriétés physicochimiques (viscosité, densité, humidité, couleur ou température) ou la présence de particules et l’infiltration d’eau. Ce nouvel outil avancé devrait réduire l’usure des composants hydrauliques en garantissant que leurs liquides sont toujours propres et clairs.

Objectif

FluidER project aims to deliver fully integrated and autonomous sensor for in-line sensing and diagnosis of aviation hydraulic fluids (HF) used in electro Hydraulic Actuators (EHA). The proposed diagnosis approach is based on the combination of hydraulic fluid physic-chemic parameter sensors and fluid contamination sensors and, with the aim of achieving an early warning of degradation signs, especially in terms of particulate count and water contamination, before the hydraulic fluids exceeds the service limits.

The combination of a set of heterogeneous sensor technologies is motivated by the lack of accuracy achieved by single devices, especially when dealing with multi-source contaminations and when an early identification of degradation evidences is targeted. FluidER proposal merges two types of approaches: (i) Sensors delivering measurements of physical and chemical parameters of the Hydraulic Fluid as the Viscosity, Density, Moisture, Dielectric Constant, Colour or Temperature, and (ii) sensors specifically designed to monitorize different contamination sources as the particulate matter concentration, presence of air or water.

Specifically, FluidER will address the analysis of physical contaminants (metallic and non-metallic particulate count, air bubbles, etc.) through in-line microscopic imaging and machine vision proprietary techniques. Additionally, chemical contaminants (water content, acidity) will be estimated through VIS-IR spectroscopic inspection and chemometric algorithms.
The information obtained from the different sensors will be used to generate a Diagnosis of the status of both, the fluid itself and the EHA equipment, through new health monitoring algorithms.

The different hardware and software components included in the FluidER solution will be gradually tested in different test beds, ranging from controlled laboratory hydraulic test beds to a complete EHA test bed and different standardized aircraft tests.

Champ scientifique (EuroSciVoc)

Programme(s)

Thème(s)

Régime de financement

CS2-IA - Innovation action

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) H2020-CS2-CFP08-2018-01

Voir tous les projets financés au titre de cet appel

Coordinateur

FUNDACION TEKNIKER
Contribution nette de l'UE
€ 352 545,00
Coût total
€ 352 545,00

Participants (1)