Degradable Polyolefin Materials Enabled by Catalytic Methods

Projektinformationen

DEEPCAT

ID Finanzhilfevereinbarung: 832480

DOI

10.3030/832480

Projekt abgeschlossen

EK-Unterschriftsdatum 8 April 2019

Startdatum 1 Oktober 2019

Enddatum 31 März 2026

Finanziert unter

• EXCELLENT SCIENCE - European Research Council (ERC)

Gesamtkosten

€ 2 494 829,00

EU-Beitrag

€ 2 494 829,00

Koordiniert durch

UNIVERSITAT KONSTANZ
Germany

Periodic Reporting for period 3 - DEEPCAT (Degradable Polyolefin Materials Enabled by Catalytic Methods)

Berichtszeitraum: 2022-10-01 bis 2024-03-31

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Plastics are essential to virtually any modern technology and therefore ubiquitious. However, when released to the environment they can persist for centuries. One pillar of a responsible future economy is therefore to endow important plastics with a non-persistent nature. Polyethylene (PE) is the largest scale synthetic material, used in transportation, energy storage, water cleaning, clothing and many other fields. However, it is most problematic concerning degradability. This project addresses this major challenge by introducing photo- and hydrolytically degradable groups in the PE chain.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

Directly during catalytic PE synthesis, isolated keto groups were generated by incorporation of small amounts of carbon monoxide. This long-sought goal is achieved via robust catalysts with extreme shielding and rigid ligand environments, and via precise control of high ethylene/CO ratios. Further types of hydrolytically cleavable groups are generated via the complementary synthetic approach of step growth from seed- or microalgae-oil derived PE-telechelics. This yields linear PE with in-chain carbonate, ester and anhydride groups. Basic materials properties of these polymers and their processsing properties are not compromised by the in-chain functional groups. At the same time, they enable a complete closed-loop recycling.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

A compartmentalized aqueous polymerization will yield the in-chain functionalized PE as nano- and microscale particle dispersions. Living catalytic polymerization in nanoparticles is pursued to achieve ultra high molecular weights and gradient PE chains forming nanodomains varying in ketone density. Aqueous heterophase oxidation with benign oxidants on all these nanoparticle are anticipated to yield in-chain ester groups. Degradation studies reflecting a marine environment will indicate the persistency behaviour and fate of microfragments, using macroscopic specimens and the above particles as models. Knowledge of the particle and bulk morphologies is be instrumental to understand the materials and degradation properties.