Skip to main content
CORDIS - Forschungsergebnisse der EU
CORDIS

Advanced material for cost-efficient and enhanced heat exchange performance for geothermal application

Projektbeschreibung

Auf dem Weg zu einer vollständig effizienten geothermischen Anwendung

Wärmetauscher spielen in Geothermiekraftwerken eine entscheidende Rolle. Allerdings ist ihre Wartung teuer und sie sind für Korrosion anfällig, insbesondere im Fall des Rankine-Kreislaufs mit organischem Fluidum. Vorhandene alternative Korrosionsschutzmittel sind negativ für die Leistung von Wärmetauschern und erfordern größere Wärmetauscher. Das EU-finanzierte Projekt GeoHex wird die Entwicklung neuartiger Materialien für die Nutzung in der Geothermie unterstützen. Mit kostengünstigem Kohlenstoffstahl als Basis wird die Materialoberfläche mit einer nanoporösen Beschichtung behandelt und die der Sole ausgesetzte Seite wird (mit stromloser Methode) mit einer Ni-P/Ni-P-PTFE Duplex-Beschichtung überzogen. Diese Beschichtungen verleihen den Wärmetauschern Kalk- und Korrosionsschutz und verbesserte Wärmeübertragungseigenschaften, die ihre Leistung, Effizienz und Kosten in einem Rankine-Kreislauf mit organischem Fluidum verbessern.

Ziel

Heat exchangers (HXs) are the most critical components of a geothermal power plant specially for organic Rankine cycle (ORC) based plant and the capital cost of heat exchanger accounts for a large proportion of ORC, and even reaches about 86% when air cooled condenser is used. Direct heat exchangers (e.g. geothermal brine to district heating) and ORC HXs such as superheater, preheater, evaporator are in direct contact with the geothermal brine, causing scaling and corrosion at different extent based on the thermophysical condition and chemical composition of the geofluid. To handle corrosion, expensive materials are recommended, but due to lower thermal conductivity and degraded performance over time compel to increases the size of the HXs. Hence, improvements in the antiscaling and anticorrosion properties as well as heat transfer performance of the HX material will lead to smaller, more efficient and less costly systems.

GeoHex will rely on the use low cost carbon steel as base material for HX. Through modifying the surface with nano porous coating and controlling the surface chemistry (along with the surface structure), GeoHex will significantly improve the heat transfer performance of single phase and phase change heat transfer process respectively. To attribute the antiscaling and anticorrosion properties, the brine side of the surface will be Ni-P/Ni-P-PTFE duplex coated by electroless method.

GeoHex will significantly reduce the cost of ORC plant while lowering the environmental impact. The technology concept can be exploited to build cost efficient HXs for solar thermal energy, heat pumps, absorption chiller, geothermal energy-based district heating cooling system. GeoHex enabled ORC plant, heat pumps and absorption chiller can be used for waste heat recovery application. Hence, GeoHex will significantly contribute to enhance the energy security, decarbonise the economy, establish the EU leadership on renewables.

Aufforderung zur Vorschlagseinreichung

H2020-LC-SC3-2018-2019-2020

Andere Projekte für diesen Aufruf anzeigen

Unterauftrag

H2020-LC-SC3-2019-RES-TwoStages

Koordinator

TWI LIMITED
Netto-EU-Beitrag
€ 711 850,00
Adresse
GRANTA PARK GREAT ABINGTON
CB21 6AL Cambridge
Vereinigtes Königreich

Auf der Karte ansehen

Region
East of England East Anglia Cambridgeshire CC
Aktivitätstyp
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Gesamtkosten
€ 711 850,00

Beteiligte (14)