Description du projet
Les drones prennent de la hauteur pour récolter le vent
La production d’énergie éolienne au sol nécessite des éoliennes qui sont difficiles à transporter et à installer. Le projet TwingTec, financé par l’UE, met au point une nouvelle technologie éolienne aéroportée visant à exploiter les vents plus forts et plus réguliers à haute altitude. Le projet repose sur un drone innovant, relié par câble à la station au sol et capable de décoller verticalement et d’atterrir en toute sécurité dans toutes les conditions de vent. Il utilise moins de matériel et peut être déployé et transporté facilement. Le projet cible dans un premier temps le marché hors réseau, où l’électricité est produite par des générateurs diesel à un coût élevé dans des régions éloignées.
Objectif
Wind energy represents 25% of the new global installed electrical generation capacity, however, ground-based wind turbines (WTs) are estimated to supply only 18% of the world’s electricity by 2050, as current wind energy systems have major challenges limiting their commercial applications: heavy dependence of productivity on the prevailing weather and huge material needs, entailing low capacity factors, difficult and expensive transportation, troublesome installation and high costs.
Our disruptive technology -Airborne Wind Energy, AWE- can harness the energy of the wind at high altitude to provide greater power output than conventional WTs, much higher capacity factors, exceeding 60% in good sites, using 95% less material needs per MW and avoiding all the associated issues. It replaces most of a conventional WT, namely the tower, blades and foundation by a much lighter and less expensive flying tethered aircraft.
The reason for seeking wind at high altitude is that the wind blows faster and more constantly. Although conventional WTs are simply not viable in most areas, TwingTec can exploit high steady winds over most of the land area of the Earth.
We firstly target the off-grid market relying on diesel generation, for the perfect combination of high energy costs and mobility requirements met by TwingTec: industrial off-takers and remote communities. LCOE estimations are €100-200/MWh, much cheaper than diesel generation. In the medium term, our products will address bigger scale promising markets as the off-shore segment in EU Islands, drastically decreasing LCOE. Unlike competitors, we have a proven technology, demonstrating our solution for automated Vertical Take-Off and Landing using integrated drone technology -patented-.
TwingTec enables 2 business models: 1) OEM: TwingTec units are purchased and transport and installation costs are charged together with an annual O&M fee. 2) Energy as a Service: Off-grid electricity is paid to TwingTec on a per MWh basis.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingénierie et technologiegénie mécaniquegénie automobilegénie aérospatialavion
- sciences socialeséconomie et affairesentreprise et gestionmodèle d’entreprise
- sciences socialeséconomie et affaireséconomieéconomie de la productionproductivité
- ingénierie et technologiegénie de l'environnementénergie et combustiblesénergie renouvelableénergie éolienne
- ingénierie et technologiegénie électrique, génie électronique, génie de l’informationingénierie électroniquerobotiquerobot autonomedrones
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Appel à propositions
(s’ouvre dans une nouvelle fenêtre) H2020-EIC-SMEInst-2018-2020
Voir d’autres projets de cet appelSous appel
H2020-SMEInst-2018-2020-1
Régime de financement
SME-1 - SME instrument phase 1Coordinateur
8600 DUBENDORF
Suisse
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.