Physical Architecture Optimization System

Información del proyecto

PHAROS

Identificador del acuerdo de subvención: 865044

DOI 10.3030/865044

Proyecto cerrado

Fecha de la firma de la CE 27 Septiembre 2019

Fecha de inicio 1 Octubre 2019

Fecha de finalización 30 Septiembre 2021

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total € 500 000,00

Aportación de la UE € 500 000,00

Coordinado por

UNIVERSITY OF STUTTGART
Germany

Resultado final

Documents, reports (3)

PEDR - Plan for the Communication Dissemination and Exploitation of Results

Scientific papers, workshops, technology days. This deliverable should summarise the beneficiaries’ strategy and concrete actions related to the communication, dissemination, exploitation and protection of the project results. This document is a living document and shall be updated/confirmed as part of the Periodic and Final Reporting of the project meaning at each periodic time. Delivery/Milestone (at the latest) T0+6M

State of the Art in 3D and routing algorithm report

State of the Art in 3D and routing algorithm report (R), Delivery/Milestone T0+4M

Report on Communication Dissemination and Exploitation of Results

Report on the implemented dissemination activities partially foreseen as in D52DeliveryMilestone at the latest T024M

Open Research Data Pilot (1)

Data Management Plan

PHAROS Data Management Plan (DMP) will describe the data management life cycle for all data sets that will be collected, processed and generated by the project. This DMP will indicate how the Consortium will handle the research data during the project, and after its completion. The first version of the DMP will be delivered in month 4 of the project (Deliverable D5.a) and will be updated at the end of the project. This plan will increase the project’s research efficiency, will save time and resources in the long run and will enhance data security and minimize the risk of data loss. Delivery/Milestone (at the latest) T0+4M

Publicaciones

Conference proceedings (2)

System integration based on packaging, piping and harness routing automation using graph-based design languages

Autores: J. Dinkelacker, D. Kaiser, M. Panzeri, P. Parmentier, M. Neumaier, C. Tonhäuser and S. Rudolph
Publicado en: DLRK Deutscher Luft- und Raumfahrtkongress, Edición 2021, 2022
Editor: TBD

Fully automated piping in an Airbus A320 landing gear bay using graph-based design languages

Autores: M. Neumaier, S. Kranemann, B. Kazmeier and S. Rudolph
Publicado en: 11th EASN Virtual International Conference, Edición 11, 2022
Editor: TBD

Book chapters (1)

On Automation Along the Automotive Wire Harness Value Chain

Autores: Marc Eheim, Dennis Kaiser, Roland Weil
Publicado en: Advances in Automotive Production Technology – Theory and Application - Stuttgart Conference on Automotive Production (SCAP2020), 2021, Página(s) 178-186, ISBN 978-3-662-62961-1
Editor: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-62962-8_21