Descrizione del progetto
Fare del PEMWE la scelta migliore per la produzione di idrogeno
L’elettrolisi dell’acqua è una delle tecnologie più ecologiche per la produzione di idrogeno. Sulla base della conduzione protonica della tecnologia della membrana elettrolitica polimerica (PEM, polymeric electrolyte membrane), l’elettrolizzatore d’acqua PEM (PEMWE, PEM water electrolyser) offre una soluzione interessante per lo stoccaggio di energia rinnovabile. Ad esempio, l’idrogeno prodotto offre un’ampia capacità di stoccaggio e può essere efficacemente riconvertito in elettricità tramite celle a combustibile. I due principali svantaggi sono i costi elevati e la bassa durata a lungo termine dei componenti delle celle. Per risolvere questo problema, il progetto HYDROGEN, finanziato dall’UE, svilupperà assemblati membrana elettrodo (MEA, membrane-electrode assemblies) in cui le membrane sono rinforzate con reti estese di fibre polimeriche attive preparate mediante elettrofilatura. L’obiettivo del progetto è fare in modo che PEMWE diventi una soluzione competitiva per la produzione di idrogeno.
Obiettivo
The project SPINAM (ERC Starting Grant 2012 - FP7 Ideas Programme) introduced a new method of elaboration and assembly based on electrospinning to produce novel energy materials with improved properties. The project focused on the development of core materials (membrane-electrode assemblies, MEAs) of proton exchange membrane fuel cells (PEMFCs) and water electrolysers (PEMWEs). Water electrolysis is one promising opportunity to address the challenge of renewable energy storage, since the hydrogen produced offers large storage capacities and can be efficiently reconverted to electricity via fuel cells. Despite its advantages, PEMWE is currently not yet widespread because of the high cost and the low durability of the cell components over time. The membrane is known to be the weakest component for long term performance, with low mechanical strength, high permeation and high creep. Reduction in the thickness of the membrane, while keeping low gas permeability and high mechanical resistance, would represent a real breakthrough, allowing for lower operating cell voltage. The HYDROGEN project (HighlY performing proton exchange membrane water electrolysers with reinforceD membRanes fOr efficient hydrogen GENeration) will tackle these issues with the preparation of novel MEAs based on membranes reinforced with extensive networks of active polymer fibres prepared by electrospinning. This concept was developed under SPINAM, where the results of the work were brought to TRL 3/4, with four-fold improvement in chemical and mechanical stability during electrochemical accelerated aging tests over state-of-the art reinforced membranes. HYDROGEN project technology provides the required disruptive solution for PEMWE to become a competitive option for H2 production up to its extensive adoption and commercialisation.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
- scienze naturaliscienze chimicheelettrochimicaelettrolisi
- scienze naturaliscienze chimichescienze dei polimeri
- ingegneria e tecnologiaingegneria ambientaleenergia e carburantipile a combustibile
- ingegneria e tecnologiaingegneria ambientaleenergia e carburantienergia rinnovabileenergia dall’idrogeno
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Argomento(i)
Meccanismo di finanziamento
ERC-POC - Proof of Concept GrantIstituzione ospitante
34090 Montpellier
Francia