Voltage Shield Stabilizer Regulator

Projektinformationen

SSR

ID Finanzhilfevereinbarung: 882230

DOI

10.3030/882230

Projekt abgeschlossen

EK-Unterschriftsdatum 8 November 2019

Startdatum 1 Dezember 2019

Enddatum 31 März 2020

Finanziert unter

• INDUSTRIAL LEADERSHIP - Innovation In SMEs

Gesamtkosten

€ 71 429,00

EU-Beitrag

€ 50 000,00

Koordiniert durch

CASTOLDI & MORETTI SRL
Italy

Periodic Reporting for period 1 - SSR (Voltage Shield Stabilizer Regulator)

Berichtszeitraum: 2019-12-01 bis 2020-03-31

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

The growing % of unstable and unpredictable renewable energy sources (RES) used for power production and the wider presence of distributed generation alters the current standards for electric grids and creates further disadvantages in terms of voltage fluctuations, and thus strengthens the demand of voltage stabilizers, both in industrialized countries in emerging countries.

Voltage management is critical to users of electrical equipment and sensitive electronics. Commercial, industrial, and residential applications require a consistent voltage despite load current variations caused by expanding system demand and load profile fluctuations.

The innovative voltage stabilizer SSR-Shield Stabilizer Regulator can stabilize the voltage level at the nominal value for fluctuations up to ±20% (compared to ±10% of state of the art competitors). Differently from current solutions available on the market, in SSR the voltage is controlled in continuous way and not by steps as in the conventional systems.

This is done by means of a brushless motor that automatically and dynamically adjusts the position of a mobile isolated, short-circuited coil over the fixed coil in the magnetic core. Besides, SSR’s magnetic core will be made of amorphous materials, which limit losses (20% compared to the standard) with consequent 20% energy savings and 8% CO2 emissions.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

Within the contract 2020-EIC-SMEInst-2018-2020/H2020-SMEInst-2018-2020-1 project SSR – Shield Stabilizer Regulator number 882230 the following activities were performed:
• Task 1: Technical Feasibility Study
• Task 2: IPR Protection and regulatory issues
• Task 3: Business Plan
• Task 4: – Financial Feasibility Study

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

In conclusion, the feasibility analysis results confirmed that the SSR project is considered of high relevance for C&M business growth at the EU and global level, with a potential strong impact.

The project will continue, with the necessary funding being partly covered by C&M stakeholder and partly requested to the European Commission as an SME-INST phase 2 project, as detailed in the previous section.
For C&M, the impact will be to increase its turnover over 40M € within 5 years from start of commercialization, with an internal rate of return of 549% and employment increase of 8 people the first year, 16 people the second year and 29 people the fifth year after start of commercialization.

SSR prototype