Description du projet
Plus besoin de particules qui suivent le courant pour évaluer les moteurs d’avion de demain
L’un des principaux défis dans la conception d’expériences consiste à vous assurer que votre méthode de mesure n’altère pas le phénomène que vous souhaitez mesurer. L’évaluation des flux d’air dans les entrées des moteurs d’avion est actuellement effectuée à l’aide de méthodes invasives. D’autres méthodes non invasives nécessitent l’ensemencement de particules pour observer les distorsions de l’écoulement, et ces particules peuvent interférer avec le fonctionnement du moteur. Le projet SINATRA, financé par l’UE, développe une méthode innovante, basée sur le laser, non intrusive et sans ensemencement pour tester la distorsion de l’écoulement dans les entrées d’air avec une haute résolution spatiale et temporelle, facilitant ainsi les tests simplifiés et précis des modèles d’avions de la prochaine génération.
Objectif
For future, novel closely coupled airframe-engine architectures with BLI concepts, current testing technology struggles to accurately assess the inlet flow distortion levels that influence the engine stability due to the low spatial and temporal resolution of current experimental methods.
New concepts will require support of numerical means, ground facilities as well as in-flight testing.
Non-intrusive, laser-based solutions such as PIV or DGV require the inlet flow to be seeded, which comes with a number of caveats including the requirement of uniform seeding distribution across the measurement plane and the installation of seeding rakes within the intake sub-system. This is notably challenging in airborne measurements.
A promising laser-based measuring technology is the seedless Filtered Rayleigh Scattering (FRS) which would be ideal for in-flight measurements. Due to its potential to offer spatial and temporal resolution similar to other laser methods, it allows even highly dynamic flow distortions generated by the geometry of the complex intakes to be clearly understood.
SINATRA plans to further mature the FRS technology and provide the necessary outlook by achieving the following: a) Develop and validate up to TRL4 an FRS measuring system prototype, using a CW laser, for time averaged distortion measurements b) upgrade the above prototype, to demonstrate an FRS measuring system working with a pulsed laser thus showing the capability of the technology to measure instantaneous distortions on a unsteady flow up to TRL3, c) provide a ground test inlet distortion facility that will be available to the whole European aeronautical, industrial & scientific community enabling a wide range of non-intrusive flow measurements representative of future architectures to be explored simultaneously and d) use the distortion data from the FRS measurements to characterise the distorted flows that are pertinent to advanced propulsion systems by means of distortion descriptors.
Champ scientifique
Programme(s)
Régime de financement
CS2-RIA - Research and Innovation actionCoordinateur
MK43 0AL Cranfield - Bedfordshire
Royaume-Uni