Designing of Novel Mixed Anion Compounds as High Voltage and High Energy Density Sodium-ion Battery Cathodes

Projektinformationen

Mixed Anion Cathodes

ID Finanzhilfevereinbarung: 898264

DOI

10.3030/898264

Projekt abgeschlossen

EK-Unterschriftsdatum 30 April 2020

Startdatum 30 April 2021

Enddatum 18 Mai 2023

Finanziert unter

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Gesamtkosten

€ 160 932,48

EU-Beitrag

€ 160 932,48

Koordiniert durch

FUNDACION UNIVERSITARIA SAN PABLO-CEU
Spain

Periodic Reporting for period 1 - Mixed Anion Cathodes (Designing of Novel Mixed Anion Compounds as High Voltage and High Energy Density Sodium-ion Battery Cathodes)

Berichtszeitraum: 2021-04-30 bis 2023-04-29

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

(i) What is the problem/issue being addressed?: The energy density of a battery is E(q)*Q(I), where E(q) is the average voltage over the state of charge (q) of the battery, and Q(I) is the capacity at a delivered current (I) of the electric power stored per unit weight and/or volume of the battery stack of cells. Safety concerns and energy density requirements dictate the development of a dendrite-free anodes and a high-voltage cathode host into which Li+/Na+ can be inserted reversibly over a large voltage range. In this context, this project is addressed to develop high voltage cathodes and high-capacity anode to harness high energy density alkali-metal-ion batteries by partial substitution with fluorine to increase the intercalation voltage reflecting in enhanced specific energy density. Therefore, we proposed a cost effective and safe methods in preparing the electrode materials by milder processes, such as the one proposed here.
(ii) Why is it important for society?: The demand to nullify the greenhouse gases emissions due to climate change without compromising on the Europe’s growing energy demand of 735 GW by 2050 have increased the dependency of renewable energy sources. However, these are intermittent/seasonal and hence, required high energy density storage devices such as batteries. Lithium-ion battery (LIBs) are considered top-notched technology to have powered portable electronics due to their high energy and power density and are therefore, being pursued to electrify plug-in electric vehicles (EVs). However, the current state-of-art LIBs consisted of rare-group elements (Li and Co) which are non-sustainable, scare, non-recyclable and hence, costs high with its growing demand to build EVs. Sodium-ion battery (SIBs) similar in-line with LIBs is considered an alternative due to vast abundance of sodium deposit and hence costs low. However, due to low electrochemical potential (-2.71 V) and large-atomic radius of Na+ couldn’t enable SIB to be used for EVs but could be used for stationary off-grid storage appliances where volume doesn’t matter. With overwhelming increase in global energy consumption, the urge to develop clean technology to store electrical energy from renewable sources are needed as they are crucial to succeed in the decarbonization of energy. Our project to develop high density lithium/sodium batteries is par in alliance with the European policy for off-grid energy storage applications.
(iii) What are the overall objectives?: To develop new synthesis routes to oxyfluorides, by fluorinating layered or tunnel structure of vanadium oxide and to investigate the electrochemical performances of the new oxyfluorides (in half cell configurations) in connection with their structures, microstructure, and morphology. And finally, to investigate the electrochemical performances of full sodium cells with the new materials as positive electrode.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

a) Main results: (1) We implemented a novel solvothermal and/or micro-wave-assisted method to synthesis fluorinated compounds at moderate temperature (≤ 230 °C) using non-hazardous reagents; (2) We reported for the first time a single step transformation of 0D V2O5 nanoparticles to 2D V2O3 nanosheets as superior negative electrodes for lithium and sodium batteries; (3) We came with a novel 3D V4O9 as a promising long stable high-capacity lithium and sodium storing cathode.
b) Overview of the results: Used solvothermal and/or micro-wave-assisted method to synthesis fluorinated compounds at moderate temperature (≤ 230 °C), we successfully prepared different high energy materials like: V2O3 nanosheets, V4O9 nanoparticles and V4O9-xFx compounds. Followed by materials characterization using various sophisticated analytical techniques to identify the phase and crystal structure, morphology and to understand the valence state and surface functional group of the compounds. This is followed by electrochemical performances of V2O3 as high energy density lithium and sodium storing anode while V4O9 and V4O9-xFx compounds were used as high-capacity lithium and sodium cathodes. Quite successful with electrochemical performances in half-cell configuration while fabrication of full pouch cell configuration is challenging and continue to pursue this target during my extended contract at Host institute.
c) Exploitation and Dissemination Activities: We filed 1 patent application (Nuevo material anódico V2O3 bidimensional libre de material carbonáceos de baja dimensionalidad para para baterías de ion litio (Spanish Patent filed Appl. Number: P202330220, March 16, 2023) while another is in-preparation. After secured the IPR, the manuscripts shall be published in SCI indexed journals. Presented our work in 1 National and 2 international conferences. We propagated the battery science & research to public by each year in the Madrid Science Week and European Research Night.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

With overwhelming increase in global energy consumption, the urge to develop clean technology to store electrical energy from renewable sources are needed as they are crucial to succeed in the decarbonization of energy. Our primary important objective of MSCA-IF proposal is development of novel energy storage materials using cheap, earthly abundant elements and sustainable resources which is par in alliance with the European policy (https://energy.ec.europa.eu/topics/research-and-technology/energy-storage_en) for off-grid energy storage applications. These materials are then used to fabricate high energy density sodium cells in-order to store the electrical energy from intermittent sources like solar, wind, tidal etc and thereby reduce the energy dependence on thermal/hydro/fossil fuels for energy generations. This strategy helps reduce the global warming and climate crisis.
In these regards, during the project tenure, we have synthesized 3 novel energy materials using earthly abundant and sustainable vanadium element in the form of V2O3, V4O9 and V4O9-xFx, respectively, as high energy density anode and high-capacity cathodes for Lithium and Sodium cells. These materials were prepared by single pot with reduced energy consumption using non-hazardous chemicals are few breakthrough achievements.
In this regard, we have reported/filed: (i) a patent titled: Nuevo material anódico V2O3 bidimensional libre de material carbonáceos de baja dimensionalidad para para baterías de ion litio (Spanish Patent filed Appl. Number: P202330220, March 16, 2023); (ii) We prepared a novel 3D V4O9 cathode material using solvothermal method as superior lithium and sodium insertion materials in the long run (Patent under preparation); (iii) Fluorination of vanadium oxides using non-hazardous fluorinating agents and methods to enable a high voltage sodium cathode (Patent under preparation).

graphical-abstract.jpg