Partitioning And Transmuter Research Initiative in a Collaborative Innovation Action

Leistungen

Simulation and optimization of performance during normal operating conditions of a MA-bearing fuel pin; comparison with ADS-MYRRHA targets
SAS and DES simulations of the Backwards Facing Step

Simulations of the Backwards Facing Step

Description of new meso-scale models and their implementation in fuel performance codes
Description of new correlations/databases for fuel performance codes to be applied to Am-bearing fuels
Towards multi-physics description of fuel behaviour for accidental conditions
Measurements and atomic scale calculations in U-Pu-Am-Np-O systems
Project presentation
Design and fabrication of the 7-pin heated bundle and integration into 15-15Ti cladding tubes

Design and fabrication of the 7pin heated bundle and integration into 1515Ti cladding tubes

Project quality plan including measure of success
Accelerator reliability studies with emphasis on the fault tolerance capabilities
Materials selection and conditions

Materials selection and conditions this deliverable will include a description of the material available for the project and the exposure conditions

Pre-test and post-test numerical analysis of coolant chemistry behaviour in the non-isothermal LBE loop MEXICO
MARINE gas puncturing and swelling behaviour of (U, Am)02

MARINE gas puncturing and swelling behaviour of U Am02

Detailed Dissemination, Exploitation and Communication action plan

Detailed Dissemination Exploitation and Communication action plan

Report on the comparison of the explicit AHFM with available test cases and on the implementation of the implicit AHFM in OpenFOAM
Data Management and Quality Plan

Data Management Plan

Data Management Plan: needs to be updated in the course of the project whenever significant changes arise such as: new data; changes in consortium policies (e.g. new innovation potential, decision to file for a patent); changes in consortium composition and external factors (e.g. new consortium members joining or members leaving).

Veröffentlichungen

Modeling of Forced Convection in low Prandtl Number Fluids Using a Novel Local Algebraic Heat Flux Model

Autoren: Habiyaremye V., Mathur A., Roelofs F.
Veröffentlicht in: NURETH20, 2023
Herausgeber: ANS

Fast Reactor Thermal Hydraulics in the Dutch PIONEER Program

Autoren: Roelofs F., Uitslag-Doolaard H., Zwijsen K., Mathur A., Visser D., Frederix E., Dovizio D., Cervi E., Stempniewicz M., De Kock I., Breijder P., Komen E.
Veröffentlicht in: IAEA Technical Meeting on State-of-the-Art Thermal Hydraulics of Fast Reactors, 2022
Herausgeber: IAEA

A Physics-Based Description of Inter-Granular Helium Behaviour in SCIANTIX for Application in Fuel Performance Codes

Autoren: R. Giorgi, A. Cechet, L. Cognini, A. Magni, D. Pizzocri, L. Luzzi, A. Schubert, P. Van Uffelen
Veröffentlicht in: ProceedingsTop Fuel 2021, 2021, ISBN 978-92-95064-35-5
Herausgeber: ANS

State-of-the-Art Turbulent Heat Flux Modelling for Low-Prandtl Flows

Autoren: Mathur A., Roelofs F., Fiore M., Koloszar L.
Veröffentlicht in: IAEA Technical Meeting on State-of-the-Art Thermal Hydraulics of Fast Reactors, 2022
Herausgeber: IAEA

Analysis of the Anisotropic Term in the Implicit Algebraic Heat Flux Model in the Case of Low Prandtl Flow in Planar Impinging Jet Case

Autoren: Oder, Jure; Coëpeau, Alexis; Koloszar, Lilla; Laboureur, Delphine; Keijers, Steven
Veröffentlicht in: NURETH20, Ausgabe 4, 2023
Herausgeber: ANS
DOI: 10.13182/NURETH20-40356

LIQUID METAL THERMAL HYDRAULIC ACTIVITIES IN EUROPEAN COLLABORATIVE PROJECTS

Autoren: F. Roelofs (NRG), M. Tarantino, G. Grasso (ENEA), K. Van Tichelen P. Schuurmans (SCK CEN)
Veröffentlicht in: Proceedings NURETH19, Ausgabe Log nr 34010, 2022
Herausgeber: ANS

NUMERICAL MODELLING AND SIMULATION OF THE CIRCE FACILITY IN THE PATRICIA PROJECT

Autoren: M. Profir, V. Moreau (CRS4), D. Martelli, I. Di Piazza, P. Lorusso, M. Tarantino (ENEA)
Veröffentlicht in: Proceedings NURETH19, Ausgabe Log nr 35033, 2022
Herausgeber: ANS

Simulating Wire-wrapped Fuel Assembly Blockages in CFD

Autoren: Roelofs F., Mathur A., Uitslag-Doolaard H.
Veröffentlicht in: ANS Annual Meeting, 2023
Herausgeber: ANS

Comparison of System Thermal Hydraulic and CFD Analyses of E-SCAPE at forced circulation and under isothermal conditions

Autoren: Pangukir F., Visser D., Roelofs F., Pacio J., Van Tichelen K.
Veröffentlicht in: NURETH20, 2023
Herausgeber: ANS

LIQUID METAL THERMAL HYDRAULIC ACTIVITIES IN EUROPEAN COLLABORATIVE PROJECTS

Autoren: P. Schuurmans (SCK CEN), S. Cornet (CEA), R. Delville (SCK CEN), L. Luzzi (POLIMI), F. Roelofs (NRG)
Veröffentlicht in: Proceedings 16IEMPT (Information Exchange Meeting on Actinide and Fission Product P&T), 2022
Herausgeber: NEA

Dutch Thermal Hydraulic Design and Safety Support for LMFRs

Autoren: Roelofs F., Visser D., Zwijsen K., Uitslag-Doolaard H.
Veröffentlicht in: Fast Reactor Conference 2022, 2022
Herausgeber: IAEA

Availability Modelling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade

Autoren: Lukas Felsberger, Andrea Apollonio, Thomas Cartier-Michaud, Eric Montesinos, Jan Uythoven
Veröffentlicht in: 12th International Particle Accelerator Conference proceedings, 2021, Seite(n) 2308-2311, ISBN 978-3-95450-214-1
Herausgeber: JACoW

Complexation and extraction studies of trivalent actinides and lanthanides with water-soluble and CHON-compatible ligands for the selective extraction of americium

Autoren: Weßling, P.; Maag, M.; Baruth, G.; Sittel, T.; Sauerwein, F. S.; Wilden, A.; Modolo, G.; Geist, A.; Panak, P. J.
Veröffentlicht in: Inorganic Chemistry, 2022, Seite(n) 17719−17729, ISSN 0020-1669
Herausgeber: American Chemical Society
DOI: 10.1021/acs.inorgchem.2c0287

State-of-the-art turbulent heat flux modelling for low-Prandtl flows

Autoren: Mathur A., Roelofs F., Fiore M., Koloszar L.
Veröffentlicht in: Nuclear Engineering & Design, Ausgabe vol. 406, 112241, 2023, ISSN 0029-5493
Herausgeber: Elsevier BV
DOI: 10.1016/j.nucengdes.2023.112241

Selective actinide(III) separation using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in the innovative-SANEX process: laboratory scale counter current centrifugal contactor demonstration

Autoren: Andreas Wilden, Dimitri Schneider, Zaina Paparigas, Maximilian Henkes, Fabian Kreft, Andreas Geist, Eros Mossini, Elena Macerata, Mario Mariani, Maria Chiara Gullo, Alessandro Casnati, Giuseppe Modolo
Veröffentlicht in: Radiochimica Acta, Ausgabe Volume 10/ 12 issues a year, 2022, Seite(n) 515-525, ISSN 2193-3405
Herausgeber: De Gruyter
DOI: 10.1515/ract-2022-0014

Overview on Lead-Cooled Fast Reactor Design and Related Technologies Development in ENEA

Autoren: Mariano Tarantino; M. Angiolini; Serena Bassini; Sebastiano Cataldo; Chiara Ciantelli; C. Cristalli; Alessandro Del Nevo; Ivan Di Piazza; Dario Diamanti; Marica Eboli; A. Fiore; Giacomo Grasso; Francesco Lodi; P. Lorusso; R. Marinari; Daniele Martelli; Francesca Papa; Camillo Sartorio; Marco Utili; Alessandro Venturini
Veröffentlicht in: Energies; Volume 14; Ausgabe 16; Pages: 5157, Ausgabe 14, 2021, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en14165157

Physics-based modelling and validation of inter-granular helium behaviour in SCIANTIX

Autoren: R. Giorgi, A. Cechet, L. Cognini, A. Magni, D. Pizzocri, G. Zullo, A. Schubert, P. Van Uffelen, L. Luzzi
Veröffentlicht in: Nuclear Engineering and Technology, Ausgabe Volume 54, 2022, Seite(n) 2367-2375, ISSN 1738-5733
Herausgeber: Korean Nuclear Society
DOI: 10.1016/j.net.2022.01.012

The SquAd derivation: A Square Additive approach to the turbulent Prandtl number

Autoren: Vincent Moreau
Veröffentlicht in: Open Research Europe, 2023, ISSN 2046-1402
Herausgeber: F1000 Research Ltd.
DOI: 10.12688/openreseurope.15367.1

Speciation and Ammonia-Induced Precipitation of Neptunium and Uranium Ions

Autoren: Leinders, Gregory; Acevedo, Beatriz; Jutier, Frédéric; Colak, Gamze; Verwerft, Marc
Veröffentlicht in: Crossref, Ausgabe 4, 2023, ISSN 0020-1669
Herausgeber: American Chemical Society
DOI: 10.1021/acs.inorgchem.3c00647

Advanced thermal-hydraulic experiments and instrumentation for heavy liquid metal reactors

Autoren: Julio Pacio; Katrien Van Tichelen; Sven Eckert; Thomas Wondrak; Ivan Di Piazza; Pierdomenico Lorusso; Mariano Tarantino; Markus Daubner; Karsten Litfin; Gen Ariyoshi; Hironari Obayashi; Toshinobu Sasa
Veröffentlicht in: Nuclear Engineering and Design 399(2022), 112010, Ausgabe 14, 2022, Seite(n) 112010, ISSN 0029-5493
Herausgeber: Elsevier BV
DOI: 10.1016/j.nucengdes.2022.112010

On the intra-granular behaviour of a cocktail of inert gases in oxide nuclear fuel: Methodological recommendation for accelerated experimental investigation

Autoren: M. Romano, D. Pizzocri, L. Luzzi
Veröffentlicht in: Nuclear Engineering and Design, Ausgabe Volume 54, Ausgabe 5, 2021, Seite(n) 1929-1934, ISSN 1738-5733
Herausgeber: Korean Nuclear Society
DOI: 10.1016/j.net.2021.11.020

Fast Reactor Multi-Scale and Multi-Physics Modelling at NRG

Autoren: Roelofs F., Uitslag-Doolaard H., Zwijsen K., Mathur A., Visser D., Frederix E., Dovizio D., Cervi E., Stempniewicz M., De Kock I., Breijder P., Komen E.
Veröffentlicht in: Nuclear Engineering & Design, Ausgabe vol. 412, 112473, 2023, ISSN 0029-5493
Herausgeber: Elsevier BV
DOI: 10.1016/j.nucengdes.2023.112473

Advancements in modelling the thermal-mechanical behaviour of MOX-fuelled pins and application to liquid-metal fast reactor conditions

Autoren: A. Magni (POLIMI)
Veröffentlicht in: 2022
Herausgeber: POLIMI

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen